NJLD LD-W1 Dual Preheat Pressing Platform

₨ 67,000

Dual Preheat Pressing Platform for iPhone Repair

The NJLD LD-W1 combines dual-sided preheating and pressure holding in one bench fixture, so you soften adhesive and hold the housing steady without switching tools. This dual preheat pressing platform handles folding, curved and straight screens and holds both the front and back cover during screen replacement and refurbishment. It covers iPhone X, XS, XS Max and the iPhone 11 to 15 series, which makes it a practical fit for repair counters that process display problem jobs and back glass work every day. The unit weighs 6.0 kg.

In stock

16 People watching this product now!
Description

NJLD LD-W1 Dual Preheat Pressing Platform for Screen and Back Cover Work

A screen job on a modern iPhone runs on two heat-and-hold stages. You soften the adhesive to separate the glass, then you hold the new part flat while the bond sets. The NJLD LD-W1 dual preheat pressing platform puts both stages into one fixture. It preheats from two sides, holds the front and back cover, and accepts folding, curved and straight screen types. As a universal fixture for iPhone X through the 15 series, it cuts down the pile of model-specific clamps on your repair bench and gives your team one repeatable method for screen replacement and refurbishment.

How the Dual-Sided Preheat Design Works

The platform name describes the core capability: dual-sided preheating. Instead of warming one face of the housing and flipping the phone mid-job, you work with heat on both sides of the repair. That layout matters most on curved and folding screens, where the panel bonds to the frame along a long adhesive line and uneven warming leaves stubborn patches that resist separation. NJLD positions the LD-W1 for folding, curved and straight screens, so the same platform covers a flat LCD job in the morning and a curved panel job in the afternoon.

Preheating also changes how separation feels under your tools. Softened adhesive releases with less force, which lowers the risk of cracking a replacement glass or flexing a frame you plan to reuse. You still choose the pace, the pick or wire, and the technique. The platform supplies the heat and a solid base for that technique.

For shops that handle both LCD and curved-edge iPhones, this removes a decision at the start of every job. You do not pick one heating pad for an older model family and a different fixture for a newer one. The LD-W1 targets the iPhone X, XS, XS Max and 11 to 15 range in one footprint, so your bench setup stays the same across the generations your counter sees every day.

iPhone Screen Pressing Function for Front and Back Covers

The second half of the 2-in-1 design is the press. After you seat a new screen or a replacement back cover, the adhesive needs steady, even contact until it grips. The LD-W1 holds the front cover and the back cover in position, so you stop balancing parts under weights, improvised clamps or your own thumb.

Back glass jobs on the iPhone X, XS and XS Max benefit most from this step. A flat, even press along the full panel keeps the adhesive line neat and the glass aligned with the frame edge. On the iPhone 11 to 15 series, the same holding action supports screen seating after a display swap. That matters when a customer returns with a display problem that traces back to a part that never sat flush.

Lifting edges, uneven gaps around the bezel and loose back glass usually come from a bond that cured without even pressure, not from the part itself. Fixing the pressing step removes a group of repeat visits. Consistent pressing also means a junior technician and a senior technician start the bond cycle from the same setup.

Where the LD-W1 Fits in the Repair Workflow

This platform serves the display and housing side of a repair, not the board. Finish your diagnostics first. A multimeter and a microscope tell you whether the phone has a hardware fault, a charging issue or a hang on logo problem that belongs on the board bench, so you rule those out before you blame the screen. Complete any hot air station or soldering station rework with the board clamped in a PCB holder, then move to the display stage.

Bring the housing to the LD-W1 after that. It does not flash, program or read chips, so it complements your ISP, eMMC and UFS equipment rather than competing with it. On a glass refurbishment line, it slots in after separation and glue cleanup and before final inspection, next to any glue removing and laminating equipment you run. Treat it as the mechanical and thermal stage of the job.

Specification Essentials and Power Setup

The brand is NJLD, the model is LD-W1, and the unit weighs 6.0 kg, which marks it as a fixed bench machine rather than a portable accessory. The power adapter comes in several plug configurations: a US plug for 110V, and UK, AU, CN or EU plugs for 220V. Pakistan’s mains supply is nominally 230V, so choose one of the 220V adapter variants and skip the step-down converter. Check the plug type against your shop sockets before you order.

Buying Checklist for Repair Shops

Check four points before you order: the iPhone range you service, the screen types you handle, your power plug type and your bench space. The LD-W1 covers iPhone X through 15 on folding, curved and straight screens, offers 110V and 220V adapter options, and fits a counter that runs screen and back glass jobs daily. If most of your volume sits in that range, this dual preheat pressing platform matches your work. If you mainly service Android boards or run software jobs, a programmer or a hot air station serves you better than a screen fixture.

Walk-in counters process screen and back glass jobs in volume, and changeover time adds up. A universal fixture removes the hunt for the right jig between jobs. You load the housing, preheat, separate or seat the part, press, and move to the next unit. Pair it with a bench microscope for edge inspection, and keep a multimeter nearby for a final charging and display check before you hand the phone back.

Additional information
Weight6.0 kg
Q & A
Please login to post questions

Key Features

  • Dual-sided preheating for the front and back of the device
  • 2-in-1 design that combines preheating and pressure holding
  • Holds both front and back covers in position
  • Supports folding, curved and straight screen types
  • Universal fixture covering iPhone X through the 15 series
  • Reduces the need for model-specific clamps and jigs
  • Weighs 6.0 kg as a fixed bench unit
  • Power adapter options in 110V (US plug) and 220V (UK, AU, CN, EU plugs)

Specifications

BrandNJLD
ModelLD-W1
CategoryPreheating Platform / Screen Repair Pressing Equipment
CompatibilityiPhone X, XS, XS Max, iPhone 11 to 15 series; folding, curved and straight screen types
Supported DevicesiPhone X, XS, XS Max, iPhone 11, 12, 13, 14, 15 series
TechnologyDual-sided preheating with front and back cover pressure holding
Input Voltage110V (US plug adapter) or 220V (UK, AU, CN, EU plug adapters)
Weight6.0 kg

Common Repair Uses

  • Screen replacement, screen refurbishment and cover pressing on iPhone X to 15 series
  • Screen replacement preheating
  • Screen refurbishment
  • Front cover holding while adhesive sets
  • Back cover pressing
  • Back cover holding during bonding
  • Curved screen pressing
  • Folding screen pressing
  • Straight (flat) screen pressing

Compatible Devices

  • iPhone X through iPhone 15 series, covering folding, curved and straight screen types
  • iPhone X
  • iPhone XS
  • iPhone XS Max
  • iPhone 11 series
  • iPhone 12 series
  • iPhone 13 series
  • iPhone 14 series
  • iPhone 15 series

FAQ

What is the product name?
The product name is NJLD LD-W1 Dual Preheat Pressing Platform.
What is the brand of this product?
The brand of this product is NJLD.
What is the model of this product?
The model of this product is LD-W1.
What is this product used for?
This product is used for dual-sided preheating and pressure holding during iPhone screen and back cover repair.
Which devices are compatible with this product?
This product is compatible with iPhone X, XS, XS Max and the iPhone 11 to 15 series.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the NJLD LD-W1 support curved and folding screens?
Yes, the LD-W1 is built for folding, curved and straight screen types.
Can the LD-W1 hold back covers as well as front screens?
Yes, it holds both the front cover and the back cover in position during repair.