2UUL SC99 Nano Solder Paste 183°C for Dock & FPC Connector

₨ 1,500

Nano Solder Paste for Dock and FPC Repair

The 2UUL SC99 nano solder paste targets dock and FPC connector soldering on smartphone boards. Its fine particle size lets you place paste on tight connector pads, and the 183°C melting point suits controlled hot air or iron reflow. The 3ml pack gives your repair bench a precise supply for charging port pads, flex connector lifts, and fine-pitch rework on iPhone models such as iPhone X, the 13 Pro series, and the 14 series. Mechanicpk supplies the SC99 to Pakistani technicians and repair shops that need a dependable paste for charging issue repairs and micro-soldering jobs.

In stock

19 People watching this product now!
Description

2UUL SC99 Nano Solder Paste for Precision Dock and FPC Work

The 2UUL SC99 nano solder paste gives mobile repair technicians a fine-particle paste built for one job: re-soldering dock and FPC connector pads. The paste melts at 183°C and comes in a 3ml pack, so you keep a small, controlled quantity on the bench instead of a large jar you rarely finish. Mechanicpk supplies it to workshops that handle charging port faults, lifted flex connectors, and fine-pitch pad repair on iPhone and other smartphone boards. If your daily queue includes dock flex replacements and connector pad rework, this paste slots straight into that workflow.

Technical Profile: Why Nano Particle Size Matters

Nano-grade paste uses a very fine solder particle size. Fine particles flow into narrow pad gaps and sit evenly under small connector pins, which matters when pad pitch shrinks and a coarser paste bridges between pads. The SC99 melts at 183°C, a mid-range point that suits connector pads that need a firm joint while the surrounding board stays clear of extreme heat. The flux inside the paste removes oxides from the pad surface, so the solder wets the copper cleanly and forms a smooth fillet. You apply the paste with a needle tip or flux dispenser, set the connector, and reflow with a hot air station or a fine soldering iron tip. Match your reflow temperature to the 183°C melting point and keep airflow low, so the connector stays aligned while the paste flows.

Where the SC99 Fits in Your Repair Workflow

A charging issue often traces back to a worn dock flex pad or a lifted connector, and this paste addresses exactly that hardware fault. Sellers list the SC99 for dock and FPC connector repair on iPhone X, iPhone 13 Pro, 13 Pro Max, iPhone 14, 14 Plus, 14 Pro, and 14 Pro Max, and the same fine-pitch approach applies to other smartphone and tablet connectors. Before you apply paste, clean the old solder from the pads with a soldering station and braid, then inspect the pads under a microscope. Hold the board steady in a PCB holder, apply a thin line of paste, and reflow. After the joint cools, check continuity with a multimeter before you close the device. Technicians who also work on BGA components pair this paste with reballing kits, though the SC99 stays focused on connector and fine-pitch soldering.

Choosing and Handling the Paste

Pick the SC99 when your job involves small connector pads and you want precise placement over bulk coverage. The 3ml pack suits repair shops that run dock and FPC jobs daily but do not need a large jar for CPU-level rework. Cap the syringe after every use, apply only the amount the pad needs, and keep the needle tip clean so the paste dispenses in a steady line. If your repair plan moves toward CPU or high-temperature rework, step up to a paste with a higher melting point and keep the SC99 for connector work. Mechanicpk stocks hot air stations, soldering stations, microscopes, and PCB holders alongside this paste, so you can build a complete connector repair setup from one supplier.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Nano-grade fine particle size for precise pad coverage
  • 183°C melting point for controlled reflow
  • Built-in flux removes oxides and helps solder wet the pad
  • Designed for dock and FPC connector soldering
  • Suits fine-pitch components and micro-soldering
  • 3ml pack for controlled bench-side use
  • Works with needle or flux dispenser application
  • Fits hot air station and fine-tip soldering iron workflows

Specifications

Brand2UUL
ModelSC99
CategorySolder Paste
CompatibilityDock and FPC connector soldering
Supported DevicesiPhone X, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, and other smartphones and tablets with dock or FPC connectors
TechnologyNano-grade fine-particle solder paste with flux, 183°C melting point, 3ml pack

Common Repair Uses

  • Connector and fine-pitch soldering on smartphone and tablet boards
  • Dock connector pad soldering for charging issue repairs
  • FPC connector re-soldering after a lifted connector
  • Dock flex replacement and pad rework
  • Fine-pitch component soldering
  • Micro-soldering on small SMD pads
  • PCB SMD repair and component placement
  • Hardware fault repair on charging port circuits
  • Small-scale connector and pad touch-up work

Compatible Devices

  • Dock and FPC connector pads on iPhone models listed by sellers, plus general smartphone and tablet connectors
  • iPhone X
  • iPhone 13 Pro
  • iPhone 13 Pro Max
  • iPhone 14
  • iPhone 14 Plus
  • iPhone 14 Pro
  • iPhone 14 Pro Max
  • Other smartphone and tablet dock or FPC connector pads

FAQ

What is the product name?
The product name is 2UUL SC99 Nano Solder Paste.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC99.
What is this product used for?
This product is used for soldering dock and FPC connectors on smartphone and tablet boards.
Which devices are compatible with this product?
This product suits dock and FPC connector soldering on iPhone X, iPhone 13 Pro, 13 Pro Max, iPhone 14, 14 Plus, 14 Pro, and 14 Pro Max, as well as other smartphone and tablet connectors.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the melting point of 2UUL SC99 nano solder paste?
The 2UUL SC99 nano solder paste melts at 183°C.
Can I use 2UUL SC99 nano solder paste for iPhone dock connector repair?
Yes. Sellers list the SC99 for dock and FPC connector soldering, including iPhone X, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, and 14 Pro Max. The pack contains 3ml of paste.