2UUL FD24 C210-S Soldering Iron Tip (5 Pack)

₨ 3,000

C210 Soldering Iron Tip 5 Pack

The 2UUL FD24 C210-S pack gives your repair bench five fine-point replacement tips for C210-compatible handles such as the T210. Each tip has an iron-plated copper build that moves heat to the joint quickly, so you reflow small SMD pads without cooking the components next to them. Mechanicpk supplies this C210 soldering iron tip multipack to technicians in Pakistan who run a micro-soldering station every day on mainboards, charging ports and flex connectors. Keep a spare set on the bench, swap a worn tip in seconds, and hold your precision work steady from the first board of the day to the last.

In stock

12 People watching this product now!
Description

2UUL FD24 C210 Soldering Iron Tip for Precision Board Work

The 2UUL FD24 C210-S is a C210 soldering iron tip for technicians who work at the fine end of mobile board repair. This pack gives you five tips under the FD24 model code, so a worn or oxidised tip never stalls a job. The C210 series builds the heating element and the tip into a single cartridge, so each swap renews the whole working end and restores heat transfer straight away. If your bench runs a T210-style precision handle, this pack covers your consumable needs for months of daily use.

Tip Build and Heat Transfer

The FD24 uses an iron-plated copper construction. Copper carries heat from the cartridge to the joint, and the iron plating protects that copper from solder erosion. The S-type profile gives you a fine, precise contact area, which suits tight pad spacing on modern smartphone boards. You place the tip on a pad, the solder flows, and the heat stays concentrated where you aim it instead of spreading across the surrounding area.

Fine tips reward good habits. Tin the tip after every few joints, wipe it on brass wool, and store it with a coat of fresh solder. Those three steps stretch the life of each tip in the pack and keep your joints bright instead of dull and grainy.

Where It Fits on Your Repair Bench

Most Pakistani workshops reach for a precision iron after the hot air station has done its job. You remove a damaged connector with hot air, then you clean the pads, tin them and fit the new part with the iron. The FD24 handles that last stage. Use it for SMD component soldering, for jumper lagana on broken tracks, for touching up fine-pitch joints, and for clearing solder bridges between neighbouring pads.

Charging issue jobs show the benefit clearly. A charging port with tight pins needs a tip that touches one pin at a time. A fine C210 tip lets you reflow each pin without lifting the pad or bridging two legs. The same logic applies to display problem repairs on flex connectors and to hardware fault diagnosis, where you tack a test wire onto a small pad to follow a dead phone’s power path with a multimeter.

Pair the tip with a microscope for pad-level visibility and a PCB holder to keep the board steady. If you need broader heat for ground planes or shields, step up to a hot air station or a larger C210 tip shape from our soldering station range.

Matching the Tip to Your Station

Check your handle before you order. The FD24 belongs to the C210 series, so it needs a C210-compatible handle such as the T210 precision handle. C245 and C115 handles take their own cartridge series, and those cartridges differ in size, so do not mix them. Multi-tip stations that list C210 support accept this tip directly.

The five-tip format also helps shops that run several benches. Hand each technician a spare, replace tips on a schedule, and avoid downtime when one tip wears out mid-repair. A pack of five costs less per tip than buying singles, and every tip in the pack carries the same FD24 profile, so your soldering results stay consistent across benches.

Mechanicpk stocks soldering irons, soldering stations, hot air stations, test boxes, multimeters, microscopes, reballing kits and PCB holders, so you can build a complete board-level repair bench from one supplier.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Pack of 5 replacement tips under the FD24 model code
  • Iron-plated copper construction for fast heat transfer
  • S-type fine precision tip for tight pad spacing
  • C210 cartridge format with integrated heating element and tip
  • Fits T210-style precision handles
  • Controlled heat for small SMD joints
  • Spare tips keep your bench running without downtime
  • Suits micro soldering under a microscope

Specifications

Brand2UUL
ModelFD24 (C210-S Series)
CategorySoldering Iron Tips
CompatibilityT210 soldering iron handle and C210-compatible soldering stations
TechnologyC210 cartridge format, S-type fine precision tip
MaterialIron-plated copper
Pack Contents5 soldering tips

Common Repair Uses

  • SMD and fine-pitch soldering on mobile phone boards and general electronics.
  • SMD component soldering and reflow
  • Jumper lagana on broken tracks and pads
  • Charging port pin soldering and touch-up
  • Solder bridge clearing between fine pads
  • Pad tinning before part replacement
  • Flex and FPC connector pin soldering
  • Test wire tacking during dead phone diagnosis
  • Board cleanup after hot air rework

Compatible Devices

  • Universal within the C210 series. The tip fits C210-compatible handles and stations, and it is not specific to any phone model or chipset.
  • T210 precision soldering handle
  • C210-compatible soldering iron handpieces
  • Multi-tip soldering stations that accept C210 cartridges
  • C210 cartridge-based micro soldering stations
  • Smartphone mainboards (Samsung, Oppo, Vivo, Infinix, Tecno, iPhone) as work surfaces, not device-specific
  • Android and iPhone charging port boards
  • Flex connector and FPC pads on phone boards
  • General SMD circuit boards under a microscope

FAQ

What is the product name?
The product name is 2UUL FD24 C210-S Soldering Iron Tip (5 Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is FD24 (C210-S Series).
What is this product used for?
This product is used for precision soldering of SMD components, jumper wires and fine-pitch joints on mobile phone boards and other electronics.
Which devices are compatible with this product?
This product is compatible with T210 soldering handles and C210-compatible soldering stations.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which handle fits the 2UUL FD24 C210-S tip?
The FD24 is a C210-series tip, so it fits C210-compatible handles such as the T210 precision handle. C245 and C115 handles use different cartridge series and do not take this tip.
Is the FD24 C210-S tip suitable for SMD work on mobile boards?
Yes. The S-type fine tip with iron-plated copper construction suits SMD component soldering, jumper lagana and fine-pitch pin work on phone boards, especially under a microscope.