YCS-JGB Golden Cudgel Tool Set 10-in-1 Blade Kit
₨ 1,800
Glue Removal Blade Kit
The YCS-JGB Golden Cudgel Tool Set gives you two handles, six blades and two brushes in one 60 g kit for mobile phone glue removal work. The cross-shaped chuck locks each blade in place, and the anti-slip mesh grip keeps your cut steady along back glass, CPU and BGA chip edges. Distributors list it for back cover glue removal, CPU delamination, BGA chip removal and PCB IC cleaning, so one kit covers the adhesive stage of most board-level jobs. Mechanicpk stocks it for technicians and service centers across Pakistan who want a swappable blade system on the repair bench.
In stock
Mobile Phone Glue Removal Blade Kit for Board-Level Rework
The YCS-JGB Golden Cudgel Tool Set is a mobile phone glue removal blade kit built for the stage of a repair where adhesive stands between you and the chip. The set packs two handles, six blades and two brushes into a package that measures 132 x 82 x 15 mm and weighs about 60 g, so it fits beside your hot air station without crowding the bench. Distributors list it for back glass glue removal, CPU delamination, BGA chip removal and PCB IC cleaning. Mechanicpk supplies it to technicians who run those jobs daily and want a swappable blade system in place of a loose pile of scrapers.
How the Cross-Shaped Chuck and Swappable Blades Work
The handle uses a cross-shaped chuck that locks each blade at a fixed position, and the anti-slip mesh pattern keeps the blade from turning when you press into stubborn glue. Because the set ships with two handles, you can load one with a scraping blade and the other with a cutting blade, then switch between them mid-job without stopping to re-seat anything. Six blades give you a choice of edges, and you replace a worn blade instead of the whole tool. The two brushes sweep loosened glue and debris off the board so you can see pad and component edges before you continue. The gold-colored handles stand out on a crowded workbench, which saves you a few seconds every time you reach for them. The kit comes from YCS, the brand behind a wide range of mobile repair hand tools, and it carries the universal fit you expect from a handle-and-blade system: the tool does not depend on a phone brand or model. That makes it practical for a shop that sees Samsung, Oppo, Vivo, Infinix, Tecno and iPhone boards across the same week, since you do not hunt for a device-specific version.
Where the Kit Fits in a Board-Level Repair Workflow
Glue removal sits between heating and chip work. In a typical job you warm the area, ease a blade under the softened adhesive, lift it away and brush the residue off before you touch the chip. That sequence applies to CPU delamination, BGA chip removal and PCB IC cleaning, the three uses distributors name for this set. Back glass jobs follow the same pattern: heat the edge, slide the blade along the seam and clear the adhesive. When a dead phone, a charging issue or a display problem traces back to a hardware fault under a glued chip, clean access decides how fast the rest of the job goes. The kit is a manual hand tool, so it needs a separate heat source, and it works best when you control your blade angle and pressure near pads and flex cables. Keep the blade flat against the glue layer, work in short passes and brush the residue away after each pass. That habit protects the board surface and keeps your view of the chip edge clear. Technicians who handle repeat boot loop issue and hang on logo boards find that a clean, glue-free chip edge makes the next step, whether that is reflow, reballing or a chip swap, far more predictable. This glue removal blade kit gives you the access; your heat and your hands do the rest.
Building the Rest of Your Bench Around It
A glue removal kit earns its place when the tools around it match the job. Pair it with a hot air station or a soldering station for heat control, a microscope to inspect pads after cleaning, and a PCB holder to keep the board steady while you cut. After you clean a CPU or BGA footprint, a reballing kit takes over, and a multimeter confirms your results before you close the phone. If your repair work extends into eMMC and UFS operations, the same bench connects naturally to eMMC programmers, UFS adapters and ISP pinout tools. Start with this set as your entry-level glue removal option, and move to more specialised equipment as your repair volume grows.
| Weight | 0.6 kg |
|---|
Key Features
- ✓Two handles let you keep two blade types loaded and switch between them during one job
- ✓Six blades in the set cover different glue removal and cutting tasks
- ✓Two brushes clear loosened adhesive and debris from boards and chip edges
- ✓Cross-shaped chuck holds each blade at a fixed, stable position
- ✓Anti-slip mesh handle design keeps the blade from turning under pressure
- ✓Gold-colored handles stand out on a busy repair bench
- ✓Compact 132 x 82 x 15 mm package at about 60 g
- ✓Universal handle-and-blade format, not tied to one phone brand or model
Specifications
| Brand Entity | YCS |
|---|---|
| Product Entity | YCS-JGB Golden Cudgel Tool Set (JGB 10-in-1 blade and brush kit) |
| Technology Entity | Cross-shaped blade chuck with anti-slip mesh handle |
| Compatible Device Entities | Smartphone motherboards, BGA chips, CPU/SoC packages, phone back glass |
| Repair Process Entity | Glue removal, CPU delamination, BGA chip removal, PCB IC cleaning |
| Industry Entity | Mobile phone repair, PCB-level repair |
Common Repair Uses
- ✓Glue removal and chip-edge preparation on phone boards and back glass.
- ✓Back cover and back glass glue removal
- ✓Motherboard CPU delamination
- ✓BGA chip removal preparation
- ✓PCB IC cleaning
- ✓Cell phone motherboard CPU disassembly
- ✓Chip disassembly on mobile boards
- ✓Circuit cutting during board repair
- ✓Brushing residue and debris off pads and chip edges
Compatible Devices
- ✓Universal, not device-specific. It works across phone brands wherever glue removal, chip edge cleaning or CPU delamination is needed.
- ✓Universal fit, not limited to a phone brand or model
- ✓Smartphone back glass panels with adhesive
- ✓Smartphone motherboards, brand-independent
- ✓BGA chips on mobile logic boards
- ✓CPU and SoC packages on mobile boards
- ✓PCB areas around ICs that need glue and residue cleaning
- ✓Phone back covers bonded with adhesive
- ✓Small electronics PCBs and boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What comes in the YCS-JGB Golden Cudgel Tool Set?
Can the YCS-JGB kit remove glue from a CPU or BGA chip on a mobile motherboard?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



