JTX JT-86 5in1 2D S2 Steel Screwdriver Set

₨ 1

5in1 S2 Steel Magnetic Screwdriver Set

The JTX JT-86 2D screwdriver set gives your mobile repair bench five S2 steel magnetic screwdrivers in a single pack. Jitongxue builds the bits from extra-hard S2 steel with chromium, molybdenum, tungsten and vanadium added for hardness and wear resistance. A noise-reducing bearing keeps the spin smooth, a non-slip handle holds firm during long repair sessions, and a large icon on the tail lets you pick the right driver at a glance. Magnetic bits hold the screw while you work inside the phone. Mechanicpk supplies the JT-86 to technicians and service centers across Pakistan who need dependable hand tools for daily opening and reassembly work.

Out of stock

16 People watching this product now!
Description

JTX JT-86 2D Screwdriver Set for Professional Mobile Repair Benches

The JTX JT-86 2D screwdriver set puts five S2 steel magnetic screwdrivers in your hands for the first and last step of almost every phone repair. Jitongxue (JTX) designed the set for mobile phone repair, and Mechanicpk stocks it for technicians who open dozens of devices a week. A charging issue, a display problem or a dead phone all begin the same way: you remove the back cover, the shields and the board screws, and any slip at that stage costs you time and sometimes a damaged screw head. This set targets that stage of the job.

S2 Steel Bits and Magnetic Hold

The manufacturer specifies extra-hard S2 steel for the bits and adds chromium, molybdenum, tungsten and vanadium to the base alloy. Those elements raise hardenability, toughness, wear resistance and heat resistance, so the tips keep their shape across repeated use instead of rounding off after a few weeks on a busy bench. The bits carry a strong built-in magnetic hold. You pick up a small screw with the tip, carry it to the hole and seat it without chasing it across the mat with tweezers. That hold matters most when you work over a populated board, where a dropped screw can land on a connector or under a shield.

Bearing Cap, Grip and Tail Icons

JTX fits the set with a noise-reducing bearing and reports that a single spin can last up to one minute. You rest your finger on the cap, apply light downward pressure and rotate the handle with your fingertips, which gives you steady control and reduces hand fatigue across a long shift. The professional non-slip handle increases friction between your hand and the driver, so the tool stays put even when your fingers carry flux or isopropyl residue. Each driver has an enlarged icon on the tail. You read the specification straight off the end of the handle, which speeds up bit selection when you switch between screw types in the same job.

Where the JT-86 Fits in Your Repair Workflow

Hand screwdrivers sit at the start of the board-level chain. You open the phone with the JT-86, release the board and move it to a PCB holder under a microscope. From there you work through the rest of your bench: hot air stations and soldering stations for rework, reballing kits for BGA jobs, multimeters for fault tracing, and test boxes or eMMC and UFS tools when a phone hangs on logo or dies after flash. The screwdriver set does not replace any of those tools. It keeps the opening and closing steps fast and clean so the expensive equipment spends its time on the actual fault.

Buying Notes for Shops and Service Centers

The JT-86 ships as one 5-piece set with a packed weight of about 0.25 kg, light enough for a technician to carry between a shop bench and a service call. Shop owners who equip several technicians can buy multiple sets so each bench has its own drivers instead of sharing one. Mechanicpk also stocks related JTX screwdrivers for technicians who want to extend their bit coverage as their repair range grows. Check the icon on each tail against the screw type on your target device before you start, since the bit lineup is not listed by size in the manufacturer’s material.

Additional information
Weight0.10 kg
Q & A
Please login to post questions

Key Features

  • Five S2 steel magnetic screwdrivers in one set
  • Extra-hard S2 steel bits with chromium, molybdenum, tungsten and vanadium alloying
  • Strong built-in magnetic hold for screws
  • Noise-reducing bearing with smooth, long spin
  • Professional non-slip handle
  • Large icon on each tail for fast bit identification
  • Compact 0.25 kg pack
  • Designed for mobile phone repair work

Specifications

BrandJTX (Jitongxue)
ModelJT-86
CategoryScrewdriver Set, Mobile Repair Hand Tools
CompatibilityMobile phones, laptops, tablets, cameras and small electronics; universal hand tool, not device-specific
TechnologyMagnetic bits with noise-reducing bearing cap
MaterialS2 steel bits (chromium, molybdenum, tungsten and vanadium alloyed), premium alloy steel body
Weight0.25 kg

Common Repair Uses

  • Opening and closing devices during hands-on repair work
  • Removing back cover and frame screws
  • Releasing board shield and bracket screws
  • Pulling the motherboard before IC rework or reballing
  • Reassembling after a charging issue or display problem repair
  • Opening a dead phone for board inspection

Compatible Devices

  • Universal hand tool for small-electronics repair; not tied to specific phone models
  • Mobile phones
  • Tablets
  • Laptops
  • Cameras
  • Small electronic devices

FAQ

What is the product name?
The product name is JTX JT-86 5in1 2D Screwdriver Set.
What is the brand of this product?
The brand of this product is JTX (Jitongxue).
What is the model of this product?
The model of this product is JT-86.
What is this product used for?
This product is used for removing and fastening screws while opening and reassembling mobile phones and other small electronics.
Which devices are compatible with this product?
This product is compatible with mobile phones, tablets, laptops, cameras and small electronics. It works as a universal hand tool and does not target specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What steel are the JTX JT-86 bits made from?
The bits use extra-hard S2 steel with chromium, molybdenum, tungsten and vanadium added to improve hardenability, toughness, wear resistance and heat resistance.
Are the JTX JT-86 screwdriver bits magnetic?
Yes. The bits carry a strong built-in magnetic hold that grips screws while you work.