PPD Opening Tool Mix 7pcs Full Set – Ultra Thin Steel
₨ 1,900
Ultra Thin Metal Opening Tool Set
PPD Opening Tool Mix 7pcs Full Set gives you seven ultra thin metal steel blades for separating phone and tablet screens, lifting batteries and prying frames without brute force. The set includes a CPU IC tin-planting blade and a tin scraper, so one set covers both disassembly and board-level cleanup. Smooth edges slide into tight case gaps, and the wrapped handle keeps your grip steady during long screen jobs. Use it on phones, tablets, laptops and watches, from curved-screen separation to chip rework prep. Mechanicpk supplies this set to repair shops and technicians across Pakistan who need a reliable ultra thin metal opening tool set at the bench.
In stock
PPD Opening Tool Mix 7pcs Full Set: Ultra Thin Metal Opening Tool Set for Mobile Repair
The PPD Opening Tool Mix 7pcs Full Set is an ultra thin metal opening tool set built for technicians who open dozens of phones a week and cannot afford bent frames or torn flex cables. You get seven steel blades in different styles, including a CPU IC tin-planting blade and a tin scraper, so the same set carries you from the first pry to the last cleanup pass. Mechanicpk stocks it for repair shops and service centres across Pakistan that want a precise, no-frills opening kit. The thin steel profile slides into narrow gaps that thicker plastic tools struggle to enter, which saves minutes on every screen job and keeps your bench moving. Whether you run a small mobile shop or a multi-bench service centre, this set gives you one consistent opening routine for phones, tablets and the occasional laptop.
Screen and frame separation with an ultra thin steel profile
Screen separation starts with a gap, and the thin blade creates one. You slide the blade between the case and the screen, then work it around the perimeter to cut through the adhesive. Smooth edges let the steel glide instead of catching, and the wrapped handle keeps your grip steady when you apply pressure along a long edge. Technicians use this approach on curved-screen phones, tablets, laptops and watches, where a wide pry tool risks cracking glass at the corners. Warm the panel first with a hot air station or a preheating plate to soften the adhesive, then let the blade do the work with light, even pressure. The different blade styles in the set let you match the tool to the gap, so you switch blades instead of forcing one. Work slowly near the corners and the flex cable side, and stop as soon as the gap opens. This phone screen separating blade set approach protects the display, the frame and your own fingers.
CPU IC tin-planting blade and tin scraper for board-level prep
Most opening sets stop at the case. This one reaches the board. The CPU IC tin-planting blade supports tin-planting work when you reball a chip, and the tin scraper clears leftover solder and tin from pads and edges before you reflow. Pair these blades with a soldering station, a reballing kit, a PCB holder and a microscope, and your chip-level workflow stays inside one organised bench setup. Check your work with a multimeter once the board is back together, especially when a dead phone arrives with a charging issue or a display problem that traces back to a lifted IC. Clean the pads with flux and wick after scraping, then inspect them under the microscope before you place the chip. Keep the metal blades away from exposed battery cells and live flex connectors, and switch to a plastic spudger whenever the job calls for non-conductive contact. A technician who prepares pads cleanly the first time avoids repeating the reflow, and that habit protects both the board and the customer’s turnaround time.
Why repair shops keep a metal opening set at the bench
Battery replacement, back glass removal, screen swaps and IC change jobs all begin with opening the device cleanly. A single seven-piece set replaces the loose mix of blades and scrapers that piles up in most workshops, and it shortens the hunt for the right tool during a rush job. Buy this ultra thin metal opening tool set when your current openers leave marks on frames, or when you want one kit that covers both disassembly and tin cleanup. Batch jobs such as ten battery replacements in one afternoon show the difference quickly, since a smooth blade cuts the time spent on each opening. Service centres that handle high daily volume benefit most, because every technician gets the same dependable opener instead of improvising with a knife or a worn spudger. As your work moves toward heavier rework, step up to hot air stations, soldering stations and reballing kits from the same Mechanicpk catalogue, and keep this set as the first tool you reach for on every opening job.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Seven-piece full set of ultra thin metal steel opening blades
- ✓Multiple blade styles for different gap sizes and device types
- ✓Includes a CPU IC tin-planting blade for chip tin-planting work
- ✓Includes a tin scraper for clearing solder and tin residue
- ✓Smooth blade edges slide into tight case-to-screen gaps
- ✓Wrapped handle for a comfortable, steady grip
- ✓Universal tool, not tied to a single phone model
- ✓Covers both device opening and board-level prep in one set
Specifications
| Brand Entity | PPD |
|---|---|
| Product Entity | PPD Opening Tool Mix 7pcs Full Set |
| Technology Entity | Ultra-thin metal steel opening blades |
| Compatible Device Entities | Smartphones, curved-screen phones, tablets, laptops, smartwatches |
| Repair Process Entity | Screen separation, battery removal, CPU/IC tin-planting and tin scraping |
| Industry Entity | Mobile phone repair, PCB repair and chip-level rework |
Common Repair Uses
- ✓Separating the screen from the frame
- ✓Prying apart phone and tablet cases
- ✓Lifting glued batteries during replacement
- ✓Back cover and frame disassembly
- ✓Tin-planting on CPU and IC chips
- ✓Scraping solder and tin residue from pads
- ✓Cleaning adhesive from frame edges
- ✓Opening watches and small electronics
Compatible Devices
- ✓Universal opening set, not model-specific, for these device types:
- ✓Smartphones (Android and iPhone frames and screens)
- ✓Curved-screen phones
- ✓Tablets
- ✓Laptops
- ✓Smartwatches
- ✓Phone and tablet batteries (adhesive separation)
- ✓Phone and laptop chips (CPU/IC tin-planting and scraping)
- ✓General electronics with glued screens or frames



