2UUL DA19 RollStop Solder Blade Set – 15mm & 9mm
₨ 1,500
2UUL DA19 Solder Blade Set for BGA Work
The 2UUL DA19 solder blade set gives your repair bench two hand-finished scrapers: a 15 mm blade for wide solder pads and a 9 mm blade for tight BGA areas on smartphone motherboards. The RollStop body stops the tool from rolling off your table, and the ergonomic handle keeps your hand steady while you tin pads, level solder paste, or clear excess solder. Mechanicpk offers the DA19 to technicians across Pakistan who rework CPU BGA pads and need a scraper that does not damage BGA stencils.
In stock
2UUL DA19 Solder Blade Set for Precision Pad Work
The 2UUL DA19 solder blade set gives smartphone motherboard and CPU BGA technicians two hand-polished scrapers in one compact kit. You get a 15 mm blade and a 9 mm blade, and both carry the RollStop anti-roll profile that stops the tool from rolling off your bench. That detail matters more than it sounds: a scraper that drops onto a populated board can scratch components or disturb a fresh jumper. 2UUL built the DA19 for three bench jobs: tinning pads, smoothing solder, and spreading or scraping solder paste on BGA stencils without damaging the stencil. Mechanicpk offers the set to technicians and repair shops across Pakistan who rework boards every day and want consistent paste control.
Blade Widths and Hand-Finished Edge
Two widths cover two pad geometries. The 15 mm blade levels solder across wide pad areas and drags solder paste over a stencil in a single clean pass. The 9 mm blade reaches tight BGA zones where the wider blade would touch neighbouring pads or stencil openings. Both blades arrive hand-finished, so the edge glides over the stencil instead of biting into it. A smooth edge protects the stencil apertures, and intact apertures give you even paste deposits when you reball a CPU. Pick the 15 mm blade for speed on larger areas and switch to the 9 mm blade when precision matters more than coverage. The kit contains one scraper of each width, so you never buy them separately.
RollStop Handle and Bench Handling
RollStop describes the handle shape that keeps the scraper resting where you set it. You free your hand for the hot air nozzle or tweezers without watching the tool roll toward the edge of your mat. The ergonomic handle gives a stable grip, and distributor listings describe it as comfortable for either hand, so left-handed and right-handed technicians use the same set. The package measures 203 × 62 × 15 mm and the set weighs 20 g net, which keeps it easy to store in a tool tray or carry between workstations. Training shops benefit too: a tool that stays put removes one common source of bench accidents for new technicians. The two-blade layout also suits shops that run several rework jobs per shift, since you swap widths in seconds instead of hunting for the right tool.
Where the DA19 Fits in Your Repair Workflow
Think of the DA19 as the pad-preparation and paste-spreading step between rework and reflow. Say you finish an IC change karna job on a dead phone with a hardware fault. You clean the old solder from the pads with a soldering station and flux, then level and tin the pads with the 15 mm or 9 mm blade. When you reball a CPU or another BGA chip, you spread paste over the stencil with the same blade and lift the stencil away, leaving a clean, uniform deposit. A microscope shows you whether the pads sit flat, and a PCB holder keeps the board still while you scrape.
The DA19 works alongside the rest of your rework line instead of replacing it. Pair it with hot air stations for reflow, soldering stations for pad cleanup, reballing kits and BGA stencils for paste application, and test boxes or multimeters for the check after reassembly. If your bench already runs ISP pinout tools and eMMC programmers for flashing, the DA19 covers the hardware side of the same job when a board needs chip-level work before you box chalana or flash.
Choose the DA19 when you want a dedicated scraper for solder and paste instead of improvising with a knife or a screwdriver blade. It protects the stencils you already spent money on, and it keeps your bench tidy. Check the Specifications block for the verified size and weight, then match the blade width to the pad area in front of you.
| Weight | 0.20 kg |
|---|
Key Features
- ✓Two blade widths in one kit: 15 mm and 9 mm
- ✓Hand-finished blade edge, safe for BGA stencils
- ✓RollStop anti-roll design keeps the tool on your bench
- ✓Ergonomic handle for a stable grip
- ✓Handles tinning, solder smoothing and removal, and solder paste work
- ✓Compact 203 × 62 × 15 mm package, 20 g net weight
- ✓Package contents: 1 × 15 mm scraper, 1 × 9 mm scraper
- ✓Built for smartphone motherboard and CPU BGA repair
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA19 |
| Category | Soldering Accessories |
| Compatibility | Universal — not device-specific (smartphone motherboard and CPU BGA rework) |
| Technology | Hand-finished blades, RollStop anti-roll design, 15 mm and 9 mm blade widths |
| Dimensions | 203 × 62 × 15 mm (package) |
| Weight | 20 g (net) |
Common Repair Uses
- ✓Pad tinning, solder smoothing, and solder paste work during smartphone motherboard and CPU BGA rework
- ✓Tinning pads after IC change karna
- ✓Smoothing solder on motherboard pads
- ✓Removing excess solder from small BGA pads
- ✓Spreading solder paste across BGA stencils
- ✓Levelling solder paste during CPU reballing
- ✓Preparing pads on a dead phone with a hardware fault before refitting a chip
- ✓CPU BGA rework on smartphone boards
- ✓General PCB maintenance
Compatible Devices
- ✓Universal accessory — not device-specific; used on smartphone motherboards and CPU BGA chips
- ✓Universal scraper, not tied to one phone brand or model
- ✓Smartphone motherboards
- ✓iPhone motherboard CPU BGA chips
- ✓Mobile phone motherboard CPU BGA chips
- ✓BGA stencils
- ✓Wide solder pad areas (15 mm blade)
- ✓Small BGA pad areas (9 mm blade)
- ✓General PCB maintenance
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which blade should I use for small BGA pads on a phone motherboard?
Will the 2UUL DA19 damage BGA stencils?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



