Relife RL-001B Pro 24-Grid Wooden Storage Box
₨ 2,500
24-Grid Wooden Repair Storage Box
The Relife RL-001B Pro wooden storage box gives your repair bench 24 separate grids for phones, spare parts and small accessories. The stepped, ladder-shaped layout lifts each row so you read labels and pick parts without moving the front items. The body uses a 3mm wooden plank with a smooth, wear-resistant surface and rounded corners without burrs. You can remove the internal dividers when a job needs a larger cavity. A thickened rubber ring fixes the structure firmly, and the curved profile makes the box easy to carry between your bench and the counter. Mechanicpk supplies it to Pakistani repair shops, service centers and technicians who need a clean job-sorting system.
In stock
Relife RL-001B Pro Wooden Storage Box for a Sorted Repair Bench
The Relife RL-001B Pro wooden storage box turns a cluttered bench into a structured job-sorting station. Relife builds it with 24 grids, a stepped layout and a 3mm wooden plank body, so you separate every phone and parts set by customer, model or fault type. A workshop that handles dead phone, charging issue, display problem and network issue jobs in the same day needs that separation, because mixed-up screws and boards cost more time than any slow repair. Place it beside your hot air station, soldering station and microscope, and each pending job stays within arm’s reach.
Stepped 24-Grid Layout Built for Fast Picking
The ladder-shaped storage raises each row above the one in front, so you see every grid at a glance. You pick the item you need without lifting or shifting the others, which matters when you work with tweezers in one hand and a screwdriver in the other. The partition design keeps categories apart, and the 24-grid count lets you assign one grid per job, per component type or per repair stage.
Most technicians split the grids by workflow. Intake devices go in the first rows, diagnosed boards in the middle, and finished phones waiting for testing in the last. That simple system reduces the “which phone is whose” problem that appears when a shop handles a high volume of hardware fault jobs.
3mm Wooden Plank Body with Removable Dividers
Relife uses a 3mm wooden plank with a fine, smooth surface that resists wear on a busy bench. Edge lines stay clean, and the corners are rounded without burrs, so the box does not scratch phone backs, frames or display glass when you slide devices in and out. The thickened rubber ring fixes the structure more firmly than a thin ring and still lets you disassemble and reassemble the box when you want to.
The internal partitions are removable. When you take them out, you gain open space for a larger item such as a tray of loose screws, a bigger accessory or several phones stacked for batch work. You assemble the box yourself, so you adapt the layout to your shop instead of working around a fixed one. The curved design follows hand mechanics, which makes lifting and carrying easier when you move jobs from the front counter to the repair table.
Where This Box Fits in Your Repair Workflow
Storage rarely gets credited in a repair workflow, yet it decides how fast a job moves. At intake, you log the phone and drop it in its grid. During diagnosis, you pull it out, check it with your multimeter or test box, and return it with the removed parts beside it. For IC change jobs and reballing work, you keep the donor parts, flux-free cleaned components and finished boards in separate grids, so nothing mixes before you reflow.
The box works alongside PCB holders, reballing kits, soldering stations and microscopes on a typical board-level bench. Shop owners who run several technicians on one table use one box per technician, which keeps every person accountable for the jobs in their grids. Service centers use the same logic for warranty and walk-in jobs, so the two queues never share a grid.
If you run a Pakistani repair shop that handles volume, this wooden storage box costs far less than a lost screw, a swapped board or a customer’s phone sitting in the wrong pile. Pair it with your ISP pinout tools, eMMC programmers and UFS adapters in the same bench layout, and you build a workspace where every tool and every job has a fixed place.
| Weight | 2.0 kg |
|---|
Key Features
- ✓24-grid storage layout
- ✓Ladder-shaped stepped design for easy picking
- ✓3mm wooden plank body with smooth, wear-resistant surface
- ✓Removable internal dividers for larger items
- ✓Thickened rubber ring for firmer fixing
- ✓DIY assembly and disassembly
- ✓Rounded corners without burrs
- ✓Curved profile for easier carrying
Specifications
| Brand | Relife |
|---|---|
| Model | RL-001B Pro |
| Category | Storage Boxes |
| Compatibility | Universal — not device-specific |
| Technology | 24-grid stepped storage with removable internal dividers |
| Material | 3mm wooden plank with thickened rubber ring |
Common Repair Uses
- ✓Job sorting, parts organization and bench workflow management in mobile repair shops
- ✓Sorting pending jobs by customer or device model
- ✓Separating diagnosed phones from untested phones
- ✓Keeping removed screws and parts with the right device
- ✓Holding donor and replacement components during IC change work
- ✓Organizing parts between reballing and reflow steps
- ✓Staging finished phones for final testing
- ✓Dividing warranty jobs from walk-in jobs
- ✓Keeping a clean bench for display, charging and hardware fault repairs
Compatible Devices
- ✓Universal — suitable for storing mobile phones, spare parts and accessories of any brand; not device-specific
- ✓Smartphones awaiting repair (all brands)
- ✓Samsung, Oppo, Vivo, Infinix and Tecno phones in a shop queue
- ✓iPhone series devices waiting for diagnosis
- ✓Loose screws and small hardware
- ✓Spare parts and replacement components
- ✓Phone accessories
- ✓Removed parts from a device under repair
- ✓Small repair consumables kept near the bench
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How many grids does the Relife RL-001B Pro have?
Can I remove the dividers inside the Relife RL-001B Pro?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



