RF4 RF-FT06 Mini Glass Fixture for Mobile Repair

₨ 3,500

Heat-Resistant Mini Board Clamp

The RF4 RF-FT06 Mini Glass Fixture holds mobile motherboards, CPUs and ICs firmly while you work with hot air or a soldering iron. Its heat-resistant glass body tolerates 500°C and above, and the knob-driven slider with two-way movement locks a board in place without sticking. The universal chip slot structure positions boards quickly, so you move from clamping to rework in seconds. Compact and portable, this RF4 RF-FT06 mini glass fixture fits crowded repair benches and suits chip de-gumming, IC clamping and motherboard repair. Repair shops and service centers across Pakistan add it to daily hot air workflows.

In stock

20 People watching this product now!
Description

Why Technicians Choose the RF4 RF-FT06 Mini Glass Fixture for Chip-Level Work

The RF4 RF-FT06 Mini Glass Fixture gives you a compact, heat-resistant platform for holding mobile motherboards, CPUs and ICs steady during chip-level repair. This RF4 RF-FT06 mini glass fixture uses a glass body that resists temperatures above 500°C, so it keeps its shape through repeated hot air cycles. A knob-driven slider locks the board in place, and the universal chip slot structure lets you position a board quickly without hunting for a matching jig. If your bench handles dead phone boards every day, a stable holder removes one more variable from the job and lets you focus on the chip.

Knob Clamping and Heat-Resistant Glass Build

The fixture relies on knob clamping. You turn the knob, the slider glides along its track without sticking, and the clamp closes on the board edge with firm, even pressure. Two-way movement lets you adjust the clamp in two directions, which helps you seat boards that have uneven outlines. The universal chip slot structure grips the motherboard directly, so you align the target IC under your hot air nozzle in seconds instead of rebuilding your setup for every new board. Heat-resistant glass avoids the warping that plastic holders show after long rework sessions, and the supplier rates it at 500°C and above. That headroom matters when you run a hot air station at high settings for stubborn chips.

Where the RF-FT06 Fits Your Repair Workflow

Clamp the board first, check the grip, then bring in your hot air station, soldering station or reballing kit. The RF-FT06 supports motherboard repair, chip de-gumming and IC clamping, and it also holds CPUs and hard disk ICs, so one fixture covers several job types on your bench. Technicians who fix hang on logo, charging issue or dead after flash boards gain the most, because those jobs often end with an IC change and a clean reflow. A steady board also protects neighbouring components while you lift a chip with tweezers. Pair the fixture with a microscope for inspection and a multimeter for continuity checks once the reflow finishes.
This model sits at the compact end of the RF4 fixture range. When you handle larger or heavier boards, the RF4 RF-FT07 Dual-Axis High-Temperature Reinforced Glass Motherboard Repair Fixture gives you the next step up, and you can keep the RF-FT06 for quick, small-board jobs. Browse the other PCB holders at Mechanicpk to build a bench that matches the boards you see most often.

Bench Setup for Pakistani Repair Shops

The RF-FT06 ships as a single fixture, so you build the rest of your workstation around it. Its mini, portable body suits crowded repair benches in market shops, service centers and training institutes where every centimetre of space counts. The universal slot structure also means you do not stock a separate jig for each phone model, which keeps your tool drawer simple and your costs predictable. Shop owners who equip several technicians can place one fixture at each seat and keep every workstation consistent.
Mechanicpk supplies the tools that surround this fixture. Add hot air stations and soldering stations for heat control, reballing kits for BGA work, microscopes for close inspection, and multimeters for fault tracing. When your repair needs software or storage-level access, ISP pinout tools, eMMC programmers, UFS adapters and test boxes complete the same workflow. Each of these categories connects to the fixture at the same point in the job: the board must sit still before any chip work, flashing or measurement starts.
Choose the RF4 RF-FT06 if you want a small, heat-tolerant holder with a smooth knob slider and a slot structure that adapts to most mobile phone boards. It solves a simple bench problem, and it solves it well: your board stays where you put it while you work.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Mini, compact and portable body for crowded repair benches
  • Heat-resistant glass construction rated at 500°C and above
  • Resists deformation through long-term repeated use
  • Knob clamping for precise and firm board holding
  • Smooth slider movement without sticking
  • Two-way movement for strong board compatibility
  • Universal chip slot structure for quick positioning
  • Clamps motherboards, CPUs, ICs and hard disk chips

Specifications

BrandRF4
ModelRF-FT06
CategoryPCB Holder / Motherboard Repair Fixture
CompatibilityMost mobile phone motherboards (universal clamp, not device-specific)
Supported DevicesMobile phone motherboards, CPUs, IC chips and hard disk ICs
TechnologyKnob clamping with two-way movement slider and universal chip slot structure
MaterialHeat-resistant glass, rated 500°C+

Common Repair Uses

  • Chip-level holding for hot air and soldering workflows
  • Mobile motherboard repair
  • Chip de-gumming (adhesive removal)
  • IC clamping during hot air rework
  • CPU clamping during removal and refit
  • Hard disk IC clamping
  • Holding boards during IC change jobs
  • Steadying boards during reballing prep
  • Compact bench holding in crowded workshops

Compatible Devices

  • Universal clamping scope, not tied to a single phone model
  • Most mobile phone motherboards
  • Android phone motherboards
  • Irregularly shaped motherboards
  • Mobile phone CPU chips
  • Mobile phone chip ICs
  • Hard disk IC chips
  • Small boards that fit the clamp’s two-way travel
  • Boards that need secure fixing for chip adhesive removal

FAQ

What is the product name?
The product name is RF4 RF-FT06 Mini Glass Fixture.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is RF-FT06.
What is this product used for?
This product is used for clamping mobile phone motherboards, CPUs and ICs during chip-level repair, chip de-gumming and hot air rework.
Which devices are compatible with this product?
This product is compatible with most mobile phone motherboards, including irregularly shaped Android boards, plus CPUs, IC chips and hard disk ICs.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What temperature can the RF-FT06 glass fixture handle?
The supplier rates the heat-resistant glass body at 500°C and above, and it keeps its shape through long-term use.
How does the RF-FT06 clamp a motherboard?
The fixture uses knob clamping with a slider that moves in two directions, and its universal chip slot structure holds the board firmly in position.