RF4 RF-FT07 Dual-Axis Glass Fixture for PCB Repair
₨ 4,200
RF4 Dual-Axis Glass PCB Fixture
The RF4 RF-FT07 Dual-Axis Glass Fixture holds phone motherboards steady on a heat-insulating tempered glass surface rated to 500°C. Its double-layer clamping design and slide rails grip Android boards, irregular shapes, and CPUs securely, so your hot air rework stays controlled from the first pass. Use this dual-axis glass PCB fixture for IC removal, glue cleanup, and board inspection on dead phone and hardware fault jobs. Mechanicpk supplies the RF4 RF-FT07 to technicians and repair shops across Pakistan who want a stable, easy-to-clean bench fixture.
In stock
Dual-Axis Glass PCB Fixture Built for Heat-Heavy Board Work
The RF4 RF-FT07 Dual-Axis Glass Fixture is a dual-axis glass PCB fixture that locks a phone motherboard in place while you work it with hot air, a soldering iron, or a preheater. RF4 builds the work surface from heat-insulating tempered glass and pairs it with a double-layer clamping design on slide rails. The supplier rates the glass to 500°C and states it keeps its shape after long-term use. On a Pakistani repair bench where the hot air station runs all day, a fixture that neither warps nor shifts matters as much as the station itself.
How the Dual-Axis Clamping Holds Your Board
The RF-FT07 clamps on two axes through a double-layer design, and the slide rails let you reposition the clamps to match the board in front of you. That matters on Android boards, where outlines vary widely between brands and generations. The fixture supports irregularly shaped motherboards and can clamp a CPU directly, and the supplier states it fits roughly 99% of mobile phone motherboards. You set the board once, tighten the clamps, and the board stays put while you apply airflow, pull a chip, or press tweezers against a package. A board that creeps under heat costs you pads, so a locked position protects every repair you attempt.
Where It Fits in Your Repair Workflow
Place the RF-FT07 at the start of any hardware fault job that needs hands-free board access. A dead phone with a suspected power IC fault, a charging issue traced to a charging IC, or a hang on logo case that points to a CPU or eMMC problem all begin with the same step: secure the board and expose the chip. Clamp it, heat the target IC with your hot air station, lift it, and clean the pads under your microscope. The same setup handles glue and underfill cleanup around ICs, which the supplier lists as an intended use for chips and precision ICs that need adhesive removal.
The fixture sits comfortably next to the rest of your bench. Pair it with a hot air station and a soldering station for rework, a microscope for pad inspection, a reballing kit once the chip is off, and a multimeter or test box for checks after reassembly. When a job moves to data-level work, the same clamped board gives you steady access for ISP pinout tools, eMMC programmers, and UFS adapters. If you outgrow a single holder, browse the PCB holders category at Mechanicpk for companion fixtures.
Surface Care and Bench Setup
The tempered glass surface cleans easily, so flux residue and glue wipe off without scraping. A clean, flat surface also keeps your board level under the microscope. Keep the clamps snug but not forced, and let the board cool before you release it. Set the fixture on a stable bench mat away from loose cables, and your hot air nozzle stays pointed where you want it instead of chasing a moving board.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Dual-axis clamping holds the board on two axes
- ✓Double-layer clamp design for precise, secure fixation
- ✓Slide rails let you reposition clamps to fit different boards
- ✓Heat-insulating tempered glass work surface
- ✓Rated heat resistance up to 500°C without deformation over long-term use
- ✓Custom clamping for Android motherboards, plus support for irregularly shaped boards
- ✓Clamps CPUs directly for chip-level rework
- ✓Easy-to-clean glass surface wipes off flux and glue residue
Specifications
| Brand Entity | RF4 |
|---|---|
| Product Entity | RF4 RF-FT07 Dual-Axis Glass Fixture |
| Technology Entity | Dual-axis double-layer clamping with slide rails, heat-insulating tempered glass |
| Compatible Device Entities | Android phone motherboards, irregularly shaped phone boards, CPUs and precision ICs |
| Repair Process Entity | Hot air IC removal, CPU rework, adhesive removal, PCB inspection |
| Industry Entity | Mobile phone repair, PCB repair, Pakistan repair market |
Common Repair Uses
- ✓Board holding during heat-based rework and chip-level repair.
- ✓Hot air IC removal and replacement
- ✓CPU removal and reflow on phone boards
- ✓Glue and underfill cleanup around ICs
- ✓Pad cleaning and flux removal after chip lift
- ✓Power IC checks on dead phone jobs
- ✓Charging IC replacement for charging issue repairs
- ✓CPU or eMMC work on hang on logo cases
- ✓Steady board holding under a microscope
Compatible Devices
- ✓Android phone motherboards, irregular board shapes, and CPUs. The tool is universal rather than brand-specific.
- ✓Android phone motherboards (custom clamping)
- ✓Irregularly shaped phone motherboards
- ✓Mainstream mobile phone motherboards (supplier states about 99% fit)
- ✓CPU packages on phone boards
- ✓Chips and precision ICs that need adhesive removal
- ✓Hard drive boards (supplier lists as clampable)
- ✓Universal fixture, not tied to one phone brand
- ✓Boards under hot air, soldering, or inspection
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature can the RF-FT07 glass surface handle?
Can the RF-FT07 clamp CPUs and irregular Android boards?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



