YCS D11 High-Conductivity Low-Resistance Silver Paste

Original price was: ₨ 1,500.Current price is: ₨ 1,200.

Conductive Silver Paste for Mobile Repair

YCS D11 High-Conductivity Low-Resistance Silver Paste gives repair technicians a precise conductive silver paste for mobile repair work. Nano-grade silver powder below 0.1 µm and 85% solid content deliver low resistance across patched lines. You use it to restore yellow, green and white screen lines on water-damaged iPhone displays, rebuild ITO and FPC conductive paths, and repair torn PCB traces on mobile motherboards. The paste air cures, and mild heat shortens the wait on a busy bench. Each pack includes a probe applicator, so you place thin lines exactly where the break sits. Mechanicpk stocks it for repair shops and service centers across Pakistan.

In stock

11 People watching this product now!
Description

YCS D11 Conductive Silver Paste for Mobile Repair at the Bench

YCS D11 High-Conductivity Low-Resistance Silver Paste gives technicians a conductive silver paste for mobile repair that rebuilds broken conductive paths where solder cannot reach. The paste uses nano-grade silver powder with particles under 0.1 µm and reaches 85% solid content, so a thin bead carries current with low resistance. You use it on ITO traces, flexible screen lines, FPC contacts and damaged PCB tracks, the places where a hardware fault hides under a clean-looking surface. Mechanicpk supplies it to repair shops and service centers across Pakistan that handle display problem jobs every day. The pack includes a probe for controlled placement.

Nano Silver Formulation and Electrical Behavior

The formulation drives everything this paste does on a board. Nano-grade silver particles below 100 nm pack tightly, and the 85% solid content leaves little binder between particles. Less binder means lower contact resistance across a repaired line. That matters on screen traces, where a small resistance rise dims a line or drops a column of pixels. The colloid looks silver-white and smooth, so it flows into hairline gaps instead of clumping at the edge of a break. Suppliers list the paste as strongly adhesive and heat tolerant. It air cures, and mild heat shortens the cure time when a customer waits at the counter. Keep your multimeter nearby. Measure continuity across the patched line before you close the device, and compare the reading with a known good trace on the same panel.

Where It Fits in a Display and PCB Repair Workflow

Display repair creates most of the demand for this paste. Water damage on iPhone screens often leaves yellow, green or white lines because ITO conductive paths corrode or break. The paste shows good compatibility with ITO film, so you patch the damaged section of the line instead of replacing the whole panel. Work under a microscope, clean the area, lay a thin line of paste across the gap with the probe, and let it cure before you test the screen. On motherboards, the same paste restores worn pads and torn traces when a pad lifts during IC replacement or a rework session. Pair it with your hot air stations and soldering stations for the rest of the job, and clamp the board in PCB holders so your hand stays steady while the paste sets. A dead phone with a lifted trace often returns to life with one clean patch.

Why Technicians Choose This Paste

Repair shops buy this paste for practical reasons. A small pack covers many micro-repairs, so the cost per job stays low in a high-volume workshop. The included probe places small amounts accurately, which cuts waste and keeps paste away from neighboring components. One pack also serves display, FPC and PCB work, so a single consumable replaces several specialist fixes. Stir the paste before use, apply thin layers, and close the container tightly between jobs. Thick layers waste silver without improving the connection. Technicians who already run reballing kits, test boxes and microscopes will find this paste fills the gap those tools leave. It repairs the conductive path itself, not the chip sitting on top of it. For a charging issue traced to a damaged board track, or a display problem traced to a broken screen line, it gives you a direct, low-resistance fix.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Nano-grade silver powder with particles below 0.1 µm for fine, even conductive lines
  • 85% solid content for low resistance across repaired traces
  • Good compatibility with ITO film for screen line patching
  • Strong adhesion to repair surfaces
  • Heat tolerant formulation suited to component conduction work
  • Air curing, with mild heat available to shorten cure time
  • Silver-white smooth colloid that flows into hairline breaks
  • Probe applicator included for controlled placement

Specifications

Brand EntityYCS
Product EntityYCS D11 conductive silver paste
Technology EntityNano-grade silver powder, 85% solid content, particle size below 0.1 µm
Compatible Device EntitiesiPhone screens, ITO film flexible screens, LCD screens, FPC, mobile phone motherboards
Repair Process EntityLCD screen line patching, PCB trace restoration, FPC conduction repair
Industry EntityMobile phone repair, PCB repair, soldering accessories

Common Repair Uses

  • Repairing yellow, green and white screen lines after water damage
  • LCD screen line patching
  • Restoring broken ITO conductive paths
  • PCB trace restoration on mobile motherboards
  • FPC conduction repair
  • Electrical contact bonding
  • Component conduction repair
  • Circuit bonding and conductivity restoration after a lifted pad

Compatible Devices

  • Universal repair material, not tied to one device model. The verified compatibility scope covers these surfaces and board types.
  • iPhone screens with yellow, green or white lines from water damage
  • Flexible screens with ITO conductive traces
  • LCD screens that need line patching
  • FPC (flexible printed circuit) contacts
  • Mobile phone motherboards and PCB traces
  • Electrical contact bonding points
  • Components that need a conductive connection

FAQ

What is the product name?
The product name is YCS D11 High-Conductivity Low-Resistance Silver Paste.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is D11.
What is this product used for?
This product is used for LCD screen line patching, ITO and FPC conductive path repair, and PCB trace restoration.
Which devices are compatible with this product?
This product works as a universal repair material on iPhone screens, ITO film flexible screens, LCD screens, FPC contacts and mobile phone motherboards.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does YCS D11 silver paste need heat curing?
No. The paste air cures, and mild heat shortens the curing time.
Can YCS D11 repair yellow, green or white lines on a water-damaged iPhone screen?
Yes. Suppliers list it for repairing yellow, green and white screen lines caused by water damage, and it shows good compatibility with ITO film.