YCS TNS360 Type-C Lighting Tail Plug Comprehensive Tester
₨ 5,800 Original price was: ₨ 5,800.₨ 4,800Current price is: ₨ 4,800.
YCS TNS360 Charging Port Tester
The YCS TNS360 Type-C Lighting Tail Plug Comprehensive Tester reads voltage, current and power on Type-C and Lightning charging ports, with a measuring range of 30V ~ 5A. Plug a phone or laptop into it and the unit starts scanning on its own, including the D+, D-, CC1 and CC2 lines on Type-C. It identifies the plug orientation automatically, so you skip the flip-and-retry routine. The built-in battery lets you run tests without an external power source. Use it to separate a damaged tail plug flex from a charging IC fault before you commit to a board-level repair. This YCS TNS360 tail plug tester fits any repair bench that handles charging complaints daily.
In stock
YCS TNS360 Tail Plug Tester: Charging Port Diagnosis Without Disassembly
The YCS TNS360 tail plug tester checks Type-C and Lightning charging ports before you open the device. It reports voltage, current and power live on a colour screen, and it scans the tail plug lines automatically once you connect the phone or laptop. Charging complaints fill most repair benches in Pakistan, and this tester shortens the path from a customer’s “charging issue” to a confirmed fault location. You know whether the port, the flex or the board is the problem before you pick up a screwdriver.
Measurement Range and Line Detection
The TNS360 covers 30V ~ 5A on its voltage and current readings, which gives you real power figures from the port. On Type-C connections, it also checks the D+, D-, CC1 and CC2 lines as soon as the device connects. Those lines decide whether a charger negotiates properly with the phone, so a bad reading points you at the tail plug or the CC logic instead of the battery. Three display pages organise the work: tail plug detection, current and voltage detection, and settings. You switch between them on the unit itself.
The power reading serves a second purpose. On Type-C products, you compare voltage, current and power against the charger’s rating and see whether the device actually pulls fast charging power. The unit currently applies this fast charging check to Type-C only, so Lightning devices get the plug and line scan without it.
Where It Fits in the Charging Fault Workflow
Start with the TNS360 when a phone charges slowly, drops the connection or refuses to charge at all. Connect the device, read the numbers and decide your next step. A clean tail plug reading sends you toward the charging IC, the battery connector or the power rail on the PCB, where a multimeter or a bench power supply takes over. A faulty reading sends you to the tail plug flex, and you replace it without tearing down the mainboard.
This order protects your time on dead phone jobs and no-charge jobs alike. You confirm the cheap fault first and reserve soldering stations, hot air stations and microscopes for cases that genuinely need board work. Repair shops that handle volume benefit most, because every phone that skips unnecessary disassembly frees your bench for the next job.
Bench Handling and Power
The unit measures 72 x 53 x 13 mm and weighs 36 g, so it sits beside your test box or PCB holder without eating bench space. It carries a built-in battery, which means you test a phone away from the main bench, at the counter or during a customer visit. The automatic flip identification handles Type-C plugs in either orientation, and you can set that behaviour in the system settings. A technician who tests twenty phones a day notices how much that saves.
Why Technicians Pair It With Other Diagnostic Tools
The TNS360 reads the port and the line state. It does not replace a multimeter for rail tracing, and it does not replace a programmer for software faults. Most workshops keep it as the first-contact tool and use it with their existing multimeters, test boxes and ISP pinout tools for deeper fault finding. If your workflow already includes reballing kits and hot air work for IC changes, the TNS360 tells you whether that work is necessary in the first place.
For Pakistani repair shops, the unit fits both iPhone Lightning jobs and the Type-C jobs that dominate Samsung, Oppo, Vivo, Infinix and Tecno traffic. One compact tester covers both connector families, which keeps your tool count low and your diagnosis consistent across brands.
| Weight | 0.10 kg |
|---|
Key Features
- ✓Tests Type-C and Lightning tail plugs with one unit
- ✓Reads voltage, current and power across a 30V ~ 5A range
- ✓Scans tail plug lines automatically after you connect the device
- ✓Checks D+, D-, CC1 and CC2 lines on Type-C interfaces
- ✓Identifies plug orientation automatically, with a setting to control it
- ✓Colour display with three pages: tail plug detection, current and voltage detection, settings
- ✓Built-in battery for tests without external power
- ✓Compact 72 x 53 x 13 mm body at 36 g
Specifications
| Brand Entity | YCS |
|---|---|
| Product Entity | YCS TNS360 Type-C Lighting Tail Plug Comprehensive Tester |
| Technology Entity | Voltage, current and power detection (30V ~ 5A), automatic tail plug scanning, Type-C CC1/CC2 and D+/D- line detection |
| Compatible Device Entities | Lightning iPhone and iPad, Type-C Android phones, Type-C laptops |
| Repair Process Entity | Charging port and tail plug diagnosis |
| Industry Entity | Mobile phone repair, GSM repair bench diagnostics |
Common Repair Uses
- ✓Charging port and tail plug diagnosis on the repair bench
- ✓Confirming a faulty tail plug flex before replacement
- ✓Separating a tail plug fault from a charging IC fault
- ✓Checking voltage, current and power draw on slow charging jobs
- ✓Diagnosing a no-charge or charging issue complaint at intake
- ✓Checking CC1 and CC2 line condition on Type-C ports
- ✓Checking D+ and D- data line condition on Type-C ports
- ✓Verifying a charging fix after repair
- ✓Testing a Type-C laptop charging port
Compatible Devices
- ✓Phones, tablets and laptops with a Lightning or Type-C charging interface
- ✓iPhone models with a Lightning port
- ✓iPad models with a Lightning port
- ✓Samsung phones with a Type-C port
- ✓Oppo and Vivo phones with a Type-C port
- ✓Infinix and Tecno phones with a Type-C port
- ✓Xiaomi and other Android phones with a Type-C port
- ✓iPhone models and tablets with a Type-C port
- ✓Laptops with a Type-C charging port
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which lines does the YCS TNS360 check on a Type-C port?
Can the YCS TNS360 test fast charging power on Lightning as well as Type-C?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



