2UUL SA13P Screen Sealing Adhesive for iP13 Pro (5pcsPack)

₨ 900

iPhone 13 Pro Screen Sealing Adhesive

The 2UUL SA13P Screen Sealing Adhesive for iP13 Pro (5pcsPack) gives your bench five pre-cut, double-sided sheets to reseal the iPhone 13 Pro display after every screen replacement or battery job. Each sheet follows the 13 Pro frame outline, so you place it in one pass with no trimming. You clean the frame, apply the tape, and press the assembly under heat to restore the front seal’s dust and water resistance. A Pakistani repair shop that handles regular iPhone 13 Pro display swaps gets repeatable, model-matched sealing from a single pack, without improvising with generic tape.

In stock

18 People watching this product now!
Description

iPhone 13 Pro Screen Sealing Adhesive Built for Precise Frame Resealing

The 2UUL SA13P Screen Sealing Adhesive for iP13 Pro (5pcsPack) is a pre-cut, double-sided iPhone 13 Pro screen sealing adhesive that closes the gap between the display assembly and the mid-frame after you open the phone. Apple seals the front of the iPhone 13 Pro with a die-cut adhesive gasket, and every screen swap, battery job, or repair that lifts the display destroys that gasket. This 2UUL strip replaces it. The pack gives you five sheets, so a bench that handles regular display replacements covers several jobs from one purchase. The part targets a single model, which keeps the cut-outs aligned with the 13 Pro frame instead of forcing you to trim a universal sheet by hand.

Pre-Cut Geometry and Adhesion Profile

2UUL supplies the SA13P as pre-cut, double-sided tape with a high-strength bond built for long-lasting hold. The shape follows the iPhone 13 Pro frame outline, so you skip measuring and cutting and place the sheet in one pass. Consistent geometry matters on this model because uneven coverage along the frame edge leaves gaps where dust and moisture enter. Clean, undeformed frame surfaces give the adhesive its best contact, so remove every trace of the old gasket and check the frame for bends before you lay the new sheet. A stereo microscope on your bench makes that inspection fast and shows leftover adhesive fragments that the naked eye misses.

Heat-Press Sealing Workflow

The SA13P needs heat-press treatment to seal properly. You apply the tape to the clean frame, seat the display, and press the assembly under heat. 2UUL names its DA07 Mini Hot Press Station for this step, and any heated press that applies even pressure across the screen also works. The heated press restores the dust and water resistance of the front seal, and 2UUL’s own instructions reference IP67 airtightness as the target. Treat the pressing step as part of the repair, not an optional finish. Keep hot air station heat away from the display edge while you work, because uncontrolled heat near the panel creates a second fault on top of the one you came to fix. If you want precise positioning during lamination, the 2UUL DA63 sealant thermal press plate set covers the iPhone 13 series and sits naturally beside this adhesive.

Where It Fits in Your Repair Workflow

Any job that lifts the iPhone 13 Pro display uses this adhesive: front screen replacement, battery replacement, charging issue diagnosis, and board-level inspection under the display. Test the new screen before you seal the phone. Check touch response, brightness, and colour with the display connected, then power down and commit the adhesive. A sealed screen that shows a display problem costs you a fresh sheet and a second press cycle. Mount the board on a PCB holder while you work on the logic board, and confirm rails with a multimeter before you close the phone.

Model matching matters with this series. 2UUL lists separate part numbers across the iPhone 13 range: SA13M for the iPhone 13 mini and SA13PM for the iPhone 13 Pro Max. Order the SA13P for 6.1-inch iPhone 13 Pro units and keep the sister part numbers in stock for the other 13 variants, so your counter never hands a technician the wrong gasket. Pakistani repair shops that run a steady flow of iPhone 13 Pro screen jobs also get a cleaner customer handover, because a resealed frame closes flush and removes the loose, rattling feel that a dry-fitted display gives. A workshop that ships display swaps daily benefits from stocking the five-sheet pack in bulk, since the sheets are thin, light, and store flat in a drawer.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut, double-sided adhesive sheets shaped for the iPhone 13 Pro frame
  • High-strength bond built for long-lasting hold
  • Five sheets per pack for multiple display repairs
  • Restores dust and water resistance of the front screen seal after repair
  • Heat-press sealing with the 2UUL DA07 Mini Hot Press Station or another heated press
  • No measuring, cutting, or trimming before application
  • Suits front screen replacement and battery replacement jobs on the iPhone 13 Pro
  • Model-specific part number (SA13P) inside the 2UUL SA series

Specifications

Brand Entity2UUL
Product Entity2UUL SA13P Screen Sealing Adhesive, iP13 Pro 5-piece pack
Technology EntityPre-cut double-sided adhesive, heat-press sealing
Compatible Device EntitiesApple iPhone 13 Pro (A2483, A2636, A2638, A2639, A2640)
Repair Process EntityiPhone display replacement, frame resealing, IP67 airtightness restoration
Industry EntityMobile repair industry, iPhone screen repair accessories

Common Repair Uses

  • Display-side resealing on iPhone 13 Pro repairs
  • Front screen replacement resealing
  • Battery replacement after display removal
  • Re-gluing the display assembly to the frame
  • Restoring dust and water resistance after opening the phone
  • Frame resealing after a heat-press lamination cycle
  • Board-level repair access under the display

Compatible Devices

  • Apple iPhone 13 Pro (6.1-inch), model-specific fit
  • iPhone 13 Pro 6.1-inch
  • A2483 (US)
  • A2636 (CA/MX/JP/SA)
  • A2638 (Global)
  • A2639 (China)
  • A2640 (Russia)

FAQ

What is the product name?
The product name is 2UUL SA13P Screen Sealing Adhesive for iP13 Pro (5pcsPack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SA13P.
What is this product used for?
This product is used for resealing the iPhone 13 Pro display to the frame after a screen replacement or other repair that removes the display.
Which devices are compatible with this product?
This product is compatible with the Apple iPhone 13 Pro.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL SA13P need a heat press to seal the iPhone 13 Pro screen?
Yes. The SA13P needs heat-press treatment to seal properly. 2UUL recommends its DA07 Mini Hot Press Station, and another heated press also works.
Can I use the SA13P on an iPhone 13 Pro Max or iPhone 13 mini?
No. 2UUL sells separate part numbers for those models: SA13PM for the iPhone 13 Pro Max and SA13M for the iPhone 13 mini. Use the SA13P on the iPhone 13 Pro.