2UUL SA15PS Screen Sealing Adhesive for iPhone 15 Plus

₨ 900

Pre-Cut iPhone 15 Plus Display Sealing Adhesive

The 2UUL SA15PS gives your bench a pre-cut, double-sided sealing gasket made for the iPhone 15 Plus display frame. Each pack holds five pieces, so you cover five display replacements without trimming tape by hand. You clean the frame, align the gasket, and heat-press the display to restore the seal that disassembly breaks. The SA15PS helps bring back dust and moisture resistance after screen replacement, charging issue repairs, and battery swaps that open the display. Mechanicpk supplies it to repair shops and service centers across Pakistan that want one consistent sealing step on every iPhone 15 Plus job.

In stock

18 People watching this product now!
Description

Pre-Cut Sealing Adhesive Built for the iPhone 15 Plus Display Frame

The 2UUL SA15PS is an iPhone 15 Plus screen sealing adhesive that replaces the factory bezel seal you break every time you separate the display. Each pack holds five pre-cut, double-sided gaskets shaped for the iPhone 15 Plus frame, so you skip hand-trimming tape and keep every reassembly consistent. Mechanicpk stocks the SA15PS for Pakistani repair shops and service centers that handle iPhone display replacement every week and need a predictable consumable on the bench instead of improvised tape.

iPhone 15 Plus Screen Sealing Adhesive: Fit and Pre-Cut Design

The SA15PS follows the iPhone 15 Plus bezel outline, so the adhesive lands exactly where the frame needs it. Pre-cut geometry removes the variables behind most resealing mistakes: uneven tape width, open corners, and cut edges that lift under the glass. You peel, align, and press. A fixed shape also lets a junior technician match the result your senior bench technician delivers, which matters when your shop runs several display jobs in one shift. The pack targets the iPhone 15 Plus frame only. For other iPhone generations, order the matching 2UUL SA-series size instead of trimming this one to fit. Five pieces per pack cover five completed repairs, so you can price the adhesive per job without guessing. Screen sealing and back cover sealing are separate jobs, too: the SA15PS seals the display frame, while 2UUL lists the BA15PS for the rear glass of the same phone. Check the model number on the tray or in Settings before you pick the part, since the iPhone 15 Plus ships under A2847, A3093, A3094, and A3096.

Heat-Press Sealing Workflow

2UUL designs the SA series for heat-press bonding. Start by removing every trace of old adhesive from the frame and cleaning the surface so the new gasket grips a dry, residue-free bezel. Lay the gasket on the frame, seat the display, then apply heat and pressure with your display press or heated display pocket. The double-sided adhesive bonds the display edge to the frame and helps restore the dust and moisture resistance the original seal gave the phone. Residue left on the frame weakens the bond more than any adhesive can compensate for, so spend your time on preparation. Keep your pressing time and temperature consistent across jobs. Write your settings on a card beside the press and every technician repeats the same sealing result. Test touch response, display output, and charging before you press the screen down for the final time. Once you seal the frame, reopening the display costs you a fresh gasket, so finish your diagnosis first.

Where the SA15PS Fits on Your Repair Bench

Display replacement is the obvious job, but the gasket matters after any repair that forces you to lift the screen. Charging issue repairs, battery swaps, and hardware fault checks on the logic board all open the same seal. After board-level work with your soldering station, hot air station, and microscope, you close the phone with a fresh gasket instead of pressing a loose display back onto an unsealed frame. Keep it beside your PCB holders, multimeters, and reballing kits so the final step of the workflow sits within reach. Shops that process screen swaps and dead phone repairs in volume benefit most, because a five-piece pack keeps the sealing step standard across every technician. Buyers who supply several branches can run one sealing procedure at every counter. Stock one pack for each repair batch and you never hold a delivery because the sealing step ran out of material. Pair it with the matching iPhone 15 Plus display, your adhesive removal tools, and a clean bench mat, and you cover the full display-replacement sequence from separation to final seal.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut to the iPhone 15 Plus display frame outline
  • Double-sided adhesive bonds display edge to frame
  • Heat-press application for a firm, even seal
  • Helps restore dust and moisture resistance after screen replacement
  • Five gaskets per pack for five completed repairs
  • Removes hand-trimming and uneven tape width
  • Standardizes the sealing step across technicians
  • Part of the 2UUL SA series for iPhone display repair

Specifications

Brand2UUL
ModelSA15PS (5pcs/Pack)
CategoryScreen Sealing Adhesive
CompatibilityiPhone 15 Plus
TechnologyPre-cut double-sided adhesive, heat-press application

Common Repair Uses

  • Display frame resealing during iPhone 15 Plus repairs
  • Screen replacement on the iPhone 15 Plus
  • Resealing the display frame after any repair that opens the screen
  • Restoring dust and moisture resistance after display removal
  • Charging issue repairs that need the display lifted
  • Battery replacement on the iPhone 15 Plus
  • Hardware fault diagnosis and board-level repair that starts with display removal

Compatible Devices

  • iPhone 15 Plus only (screen frame sealing; not for other iPhone models)
  • Apple iPhone 15 Plus (A2847)
  • Apple iPhone 15 Plus (A3093)
  • Apple iPhone 15 Plus (A3094)
  • Apple iPhone 15 Plus (A3096)

FAQ

What is the product name?
The product name is 2UUL SA15PS Screen Sealing Adhesive for iPhone 15 Plus (5pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SA15PS.
What is this product used for?
This product is used for resealing the iPhone 15 Plus display frame after screen replacement or any repair that opens the display.
Which devices are compatible with this product?
This product is compatible with the iPhone 15 Plus only.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL SA15PS fit the iPhone 15, 15 Pro, or 15 Pro Max?
No. The SA15PS is cut for the iPhone 15 Plus frame. 2UUL sells separate sizes for the other models: SA15 for the iPhone 15, SA15P for the iPhone 15 Pro, and SA15PM for the iPhone 15 Pro Max.
How do you apply the 2UUL SA15PS screen sealing adhesive?
Remove old adhesive residue from the frame and clean it, align the pre-cut gasket on the bezel, seat the display, then apply heat and pressure with a display press or heated display pocket.