2UUL DA68 Back Cover Sealant Thermal Press Plate (2Pcs)

₨ 3,500

iPhone 17 Pro Back Cover Press Plate

The 2UUL DA68 is an iPhone 17 Pro back cover press plate built for the hot-press stage of back glass replacement. Each pack gives you two plates that carry heat into the sealant line, so the adhesive cures faster and bonds into a stronger seal. A camera cutout matches the iPhone 17 series back cover, so the plate sits clear of the lens area while you press. Mechanicpk supplies the DA68 for repair shops and service centers in Pakistan that handle iPhone 17 Pro and 17 Pro Max back cover jobs and want a tool made for the step instead of improvised clamping.

In stock

18 People watching this product now!
Description

iPhone 17 Pro Back Cover Press Plate for Sealant Curing

The iPhone 17 Pro back cover press plate from 2UUL, model DA68, gives your repair bench a dedicated tool for the hot-press step of back glass replacement. Mechanicpk supplies the DA68 as a two-piece pack for technicians who reseal the back cover on iPhone 17 Pro and iPhone 17 Pro Max units. The plates transfer heat into the sealant line, so the adhesive cures faster and the finished seal holds stronger. If your shop takes in the newest Apple flagships for back glass work, this plate replaces guesswork with a part shaped for the job.

How the DA68 Fits the Back Cover Hot-Press Step

Back cover repair does not end when the new glass drops onto the frame. The sealant has to cure under heat and pressure, and that stage decides whether the repair lasts or comes back as a customer complaint. The DA68 handles that stage. You place the plate against the back cover during hot pressing, and it moves heat into the adhesive so curing runs faster and the seal comes out firmer.

The two-piece pack matters on a working bench. You can keep one plate in the press while the next unit waits, and you avoid swapping a single plate between jobs. For a shop that processes several back glass repairs a day, that rhythm saves real time.

Thermal Transfer and Camera Cutout Design

The listing describes the DA68 as a plate with strong thermal conductivity that spreads heat evenly. Even heat protects the adhesive from the two failures you want to avoid: hot spots that damage the sealant and cold zones that leave a weak bond. You get a more consistent seal across the whole back cover edge.

The camera cutout is the second design point. 2UUL shapes it to match the iPhone 17 series back cover, so the plate does not press on the camera area. That clearance lets you apply pressure where the seal needs it and leave the lens module alone. A generic flat plate cannot offer this fit.

Where It Sits in Your Repair Workflow

The DA68 belongs to the final bonding stage of a back glass job. Before it, you separate the old back cover with your Hot Air Station, clean the frame, and inspect the internals under a Microscope. A PCB Holder keeps the board stable if the job also involves a hardware fault, such as a charging issue or a damaged flex, that you fix while the phone is open. After you reseal and press with the DA68, the phone returns to the customer with a closed, even back cover.

Technicians who run board-level work alongside cosmetic repair will find the DA68 fills a gap between the two. It does not replace Soldering Stations, Multimeters, or Test Boxes. It finishes the job those tools start. Pair it with a Reballing Kit and ISP Pinout Tools when the same phone comes in with a dead phone fault and a cracked back glass together, and you can close both problems in one visit.

Choose the DA68 when your workflow already includes hot-press back cover sealing and you want plates matched to the iPhone 17 Pro series. If you work across older iPhone generations, 2UUL sells separate plates for those models, so match the plate to the phone and avoid forcing one plate across series.

Additional information
Weight0.49 kg
Q & A
Please login to post questions

Key Features

  • Two plates per pack for continuous bench work
  • Transfers heat to the sealant line to speed curing
  • Improves back cover seal strength during hot pressing
  • Strong thermal conductivity for even heat distribution
  • Helps avoid adhesive damage from overheating or uneven heating
  • Camera cutout matched to the iPhone 17 series back cover
  • Made for iPhone back cover repair
  • Suits repair shops, service centers, and professional technicians

Specifications

Brand2UUL
ModelDA68 (2 pcs/pack)
CategoryBack Cover Sealant Thermal Press Plates
CompatibilityiPhone 17 Pro, iPhone 17 Pro Max
Supported DevicesiPhone 17 Pro, iPhone 17 Pro Max
TechnologyThermal press plate for sealant curing during back cover hot pressing

Common Repair Uses

  • Back cover (back glass) resealing and hot pressing on supported iPhone models
  • Hot pressing a new back cover onto an iPhone 17 Pro frame
  • Hot pressing a new back cover onto an iPhone 17 Pro Max frame
  • Curing back cover sealant after back glass replacement
  • Resealing a back cover after internal repair work
  • Pressing the back cover with clearance around the camera area

Compatible Devices

  • iPhone 17 Pro and iPhone 17 Pro Max back covers
  • iPhone 17 Pro
  • iPhone 17 Pro Max

FAQ

What is the product name?
The product name is 2UUL DA68 Back Cover Sealant Thermal Press Plate (2Pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is DA68.
What is this product used for?
This product is used for pressing and heating the back cover during sealant curing on iPhone back glass repairs.
Which devices are compatible with this product?
This product is compatible with iPhone 17 Pro and iPhone 17 Pro Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which iPhone models does the 2UUL DA68 press plate support?
The DA68 is listed for the iPhone 17 Pro and iPhone 17 Pro Max back cover. Some listings refer to the iPhone 17 series in general, so confirm fit for any other iPhone 17 model before you order.
Does the DA68 plate have a camera cutout?
Yes. The DA68 has a camera cutout shaped to fit the iPhone 17 series back cover, so the plate does not press on the camera area during hot pressing.