2UUL CS01 Cushion Seal Tape for Screen Frame & Back Cover
₨ 900
2UUL CS01 3mm Seal Tape
The 2UUL CS01 Cushion Seal Tape for Screen Frame & Back Cover is a 3mm double-sided cushioning tape that rebuilds the adhesive seal between a phone’s LCD frame and its back cover. The ultra-flexible cushion layer absorbs pressure when you press the screen into the frame, which lowers the risk of compression damage to the LCD during reassembly. Each pack holds five rolls, so one order covers a full run of screen and back cover jobs on a busy repair bench. Mechanicpk supplies the 2UUL CS01 cushion seal tape across Pakistan to technicians, repair shops, and service centers that want consistent bonding after every display replacement.
In stock
2UUL CS01 Cushion Seal Tape for Dependable Screen and Back Cover Bonding
The 2UUL CS01 cushion seal tape gives your repair bench a precise 3mm double-sided adhesive for the two joints that fail most often after a phone opens: the LCD-to-frame bond and the back cover seam. 2UUL builds the CS01 around an ultra-flexible cushioning material, so the tape does more than stick. It also absorbs the compression load when you press a fresh screen into a frame. Mechanicpk stocks the CS01 for technicians who treat adhesive as a real component of the repair, not an afterthought, and who need a repeatable result across dozens of reassemblies every week.
Cushion Construction and the 3mm Width
CS01 is a double-sided cushion seal tape, and the cushioning layer separates it from thin flat adhesive film. During installation, the flexible material spreads pressure along the bonding edge, which reduces the chance of compression damage to the LCD. The 3mm width suits the narrow bonding edges on modern smartphones, so you lay a clean line of adhesive without it creeping toward the display area. The tape bonds firmly without leaving excessive residue when you reopen the device later, which matters for every phone that returns for a second service. The cushion also gives the finished joint a snug, gap-free fit between the screen frame and the back cover.
This matters most on repeat repairs. A frame that has lost its original adhesive lets the screen shift, rattle, or lift at the corners, and customers read that as a poor repair even when the hardware fix was perfect. Fresh CS01 tape restores the bond so the screen sits flush against the frame and the back cover closes without a visible gap. You spend a few seconds on the tape and protect the quality of the whole job.
Where CS01 Fits in the Screen Replacement Workflow
Most display problem jobs follow the same path: you separate the screen, clean the frame, and rebuild the bond before you close the phone. CS01 handles that last stage. Strip the old adhesive with your usual method, soften stubborn residue with a hot air station at controlled heat, and inspect the frame edge under a microscope for dust or lifted material. Cut the tape to length, lay it along the frame, and press the screen or back cover into place. Keep the liner on until the moment you bond, so dust stays off the adhesive.
The same tape covers back cover resealing after a battery swap, a charging issue repair, or any hardware fault job that forces you to open the housing. A PCB holder keeps the board steady while you work, and a soldering station handles the board-level steps that come before the case goes back together. Whether the job is a dead phone that needs a board repair or a simple screen change, the tape closes the repair cleanly and keeps the phone looking finished.
CS01 3mm Versus CS02 5mm, and Pack Quantity
2UUL sells this cushion seal tape in two widths. CS01 measures 3mm, and CS02 measures 5mm. Choose CS01 for the slim bonding edges on smartphones. Choose the 5mm CS02 when the device has a wider bonding surface, such as a tablet. Each CS01 pack contains five rolls, which suits shops that run screen replacements daily and want a spare roll within reach of every bench. Buyers who service both phones and tablets can stock both widths and match the tape to each job in seconds, instead of improvising with a mismatched adhesive. Technicians in Pakistan can order CS01 from Mechanicpk alongside hot air stations, microscopes, PCB holders, and the other consumables that keep a repair workflow moving.
| Weight | 0.98 kg |
|---|
Key Features
- ✓Double-sided adhesive bonds the LCD to the frame and the frame to the back cover
- ✓Ultra-flexible cushion material absorbs pressure during installation
- ✓3mm width fits narrow smartphone bonding edges
- ✓Reduces the risk of compression damage to the LCD
- ✓Leaves no excessive residue when you reopen the device
- ✓Five rolls per pack supply a full workshop run
- ✓Cuts to the length your frame needs
- ✓Pairs with the wider 5mm CS02 for tablets and broad bonding surfaces
Specifications
| Brand | 2UUL |
|---|---|
| Model | CS01 |
| Category | Cushion Seal Tape |
| Compatibility | LCD frame and back cover bonding on smartphones and tablets |
| Technology | Double-sided cushion adhesive tape |
| Width | 3mm |
| Pack Quantity | 5 rolls |
Common Repair Uses
- ✓Rebuilding the adhesive bond and seal between the screen, frame, and back cover
- ✓Rebonding an LCD to its frame after screen replacement
- ✓Resealing a back cover after battery replacement
- ✓Refitting a back cover after back glass replacement
- ✓Closing the housing after charging port or board-level repair
- ✓Replacing dried or damaged adhesive along the frame edge
- ✓Cushioning the LCD edge during frame reassembly
- ✓Refurbishing used phones before resale
Compatible Devices
- ✓Universal 3mm tape for smartphone and tablet LCD frames and back covers; not tied to a specific phone model
- ✓Smartphone LCD screen frames
- ✓Smartphone back covers
- ✓Smartphone mid-frames and housings
- ✓Tablet LCD frames
- ✓Tablet back covers
- ✓Universal bonding tape, not limited to one brand or model
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What width is the 2UUL CS01 cushion seal tape and how many rolls come in a pack?
What is the difference between 2UUL CS01 and CS02 tape?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



