2UUL DA35 Magnetic Camera Protector for Phone Repair
₨ 800
Magnetic Camera Protector for Repair Benches
The 2UUL DA35 Magnetic Camera Protector for Phone Repair 8pcs/pack gives you eight reusable magnetic covers in four sizes, two of each. Each cover snaps over a rear camera lens and holds without tape or adhesive, so you shield the glass while you work around it. Technicians reach for it during back glass removal, micro-soldering, and hot air work, where dust, flux, and stray tool contact threaten the lens. The set weighs 11 g net, so a spare pack fits in any toolbox tray. Order it from Mechanicpk for your Pakistan repair shop and keep a ready protector at every station.
In stock
Magnetic Camera Protector for Phone Repair: What the 2UUL DA35 Does at Your Bench
The 2UUL DA35 Magnetic Camera Protector for Phone Repair 8pcs/pack is a magnetic camera protector for phone repair that covers the rear camera lens while you open, rework, and rebuild a handset. 2UUL packs eight protectors into one set: four sizes, two covers of each. A rear camera lens costs real money to replace and takes seconds to scratch, and a loose sticker does little against flux, dust, or a slipping tool. The DA35 replaces that guesswork with a cover that clamps on magnetically, stays put through handling, and comes off without tools.
Why a Magnetic Camera Protector Beats Loose Stickers
Disposable stickers lift at the edges, trap dust, and tear when you reposition them. The DA35 uses magnetic attachment instead, so each cover seats over the lens housing in one move and holds without adhesive. You remove it just as fast when the job ends. Four included sizes, two covers per size, let you match the cover to the camera module in front of you rather than forcing one diameter onto every phone. The covers are reusable, so one pack serves many jobs, and a shop with two or three technicians can keep a pair at each station. The design targets rear camera lenses, which sit exposed on the back panel while you work.
This matters on a Pakistani repair bench, where one technician often handles screen swaps, back glass jobs, and board repair within the same hour. A cover you can place and lift in seconds keeps that rhythm intact. You skip the tape peeling and the repositioning, and the lens stays shielded from dust, scratches, flux, solder splashes, and fingerprints.
Verified Technical Details Before You Order
Check the numbers first. The pack holds 8 covers: 4 sizes with 2 of each. One set weighs 11 g net and 23 g gross, and the retail pack measures 83 x 41.5 x 31.5 mm. The suppliers list the set for smartphone and tablet repair, and the covers protect rear camera lenses. The published listings do not give exact diameters for the four sizes, and they do not carry a model-by-model compatibility list. Treat the DA35 as a universal accessory, and test-fit the nearest size against the camera housing on the phone you are repairing before you start the job.
The compact pack also helps when you stock a workshop. Several sealed sets fit beside your consumables, and the 8-piece count gives a multi-technician shop a cover for each station.
Where the DA35 Fits in Your Repair Process
Back glass removal is the clearest use. Laser back glass removal puts the camera lens at risk, and a magnetic cover shields it while you work. During micro-soldering or hot air rework near the camera module, the cover blocks flux splash and dust from landing on the glass. When a dead phone needs a board-level look, or you open a handset for a charging issue or display problem, you cover the camera first and then focus on the fault.
Pair the protector with the tools that define a clean bench: a hot air station and soldering station for rework, a microscope for inspection, a PCB holder to steady the board, a multimeter for diagnostics, and a reballing kit when the job moves into BGA work. Each of those tools exposes nearby parts to risk, and a covered lens removes one variable.
Repair shops, service centers, and training institutes use protectors like this because a scratched camera lens turns a finished repair into a customer complaint. The DA35 does not repair anything and does not replace careful handling. It gives your hands a safer margin on every job that exposes the camera.
| Weight | 0.15 kg |
|---|
Key Features
- ✓8 reusable magnetic covers in one pack
- ✓4 sizes, 2 covers of each size
- ✓Magnetic attachment with no adhesive
- ✓Tool-free installation and removal
- ✓Shields the lens from dust, scratches, and fingerprints
- ✓Blocks flux and solder splash during rework
- ✓Designed for smartphone rear camera lenses
- ✓Lightweight at 11 g net
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA35 |
| Category | Repair Tools – Camera Protectors |
| Compatibility | Smartphone rear camera lenses (universal, not device-specific) |
| Supported Devices | iPhone and Android smartphones; tablet rear cameras |
| Technology | Magnetic attachment |
| Pack Contents | 8 pieces (4 sizes x 2) |
| Dimensions | 83 x 41.5 x 31.5 mm (packaging) |
| Weight | 11 g net / 23 g gross |
Common Repair Uses
- ✓Protecting the rear camera lens while the phone is open or under rework
- ✓Laser back glass removal
- ✓Back glass and back cover replacement
- ✓Micro-soldering near the camera module
- ✓Hot air rework on or near the camera area
- ✓General disassembly and reassembly handling
- ✓Dust and flux shielding during cleaning and service
- ✓Fingerprint and scratch prevention on the lens
Compatible Devices
- ✓Universal rear camera coverage across four cover sizes; no device-specific model list is published
- ✓Smartphone rear camera lenses
- ✓iPhone rear cameras
- ✓Android smartphone rear cameras
- ✓Tablet rear cameras (listed application scope)
- ✓Multiple camera module layouts through the 4 included sizes
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How many covers and sizes come in the 2UUL DA35 pack?
Does the 2UUL DA35 camera protector need adhesive or tools to install?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



