2UUL FD22 C210-K Soldering Iron Tip (5 Pack)
₨ 3,200
C210-K Tip Set for Mobile Repair Benches
The 2UUL FD22 C210-K soldering iron tip 5 pack replaces worn tips on C210-compatible handles, including T210 and T26 style handles. Each tip uses an iron-plated copper build for steady heat transfer and clean solder flow, so you tin pads, lay jumper wires, and desolder flying leads on phone motherboards with consistent control. The five-tip pack keeps spares on your bench for every dead phone and charging issue that lands on your desk. Pick this set if you run a C210 station and want a reliable, precision-class consumable for daily board-level work.
In stock
C210-K Soldering Iron Tip Pack for Precision Board Work
The 2UUL FD22 C210-K soldering iron tip 5 pack gives your bench five replacement tips for C210-compatible handles. If you run a T210 or T26 style handle, these tips slot into your existing station and restore clean heat transfer without a new iron. Mobile repair benches burn through tips quickly: an oxidised tip refuses solder, and a worn tip spreads heat unevenly across a pad. A fresh set keeps your joints consistent from the first dead phone of the morning to the last charging issue of the night.
Key Technical Highlights
The FD22 belongs to the C210-K family, so the tip body follows the C210 format that C210-compatible handles accept. 2UUL builds the tip from iron-plated copper. The copper core carries heat to the contact point, and the iron plating protects the surface so solder wets the tip cleanly. You get five tips per pack, and the whole pack weighs about 30 grams, so spares fit in a drawer or parts organiser without taking bench space. The tip fits C210 handles only. C115 and C245 handles use their own tip formats, so check your handle before you order.
Repair Workflow Fit
On a mobile repair bench, this tip works between diagnosis and final assembly. You trace a hardware fault with your multimeter and microscope, then reach for the iron to tin a pad, lay a jumper wire, or clear a flying lead. Technicians use C210-class tips for desoldering flying leads on phone motherboards and for fine soldering where a larger iron would bridge neighbouring pads. When a drop leaves a damaged track and you start jumper lagana, the tip lets you place heat exactly where the repair needs it. Pair the iron with a PCB holder and a microscope to keep your hands steady, and use your hot air station for larger ICs while this tip handles the small parts around them.
Matching the Tip to Your Pad Size
2UUL sells C210-compatible tips in K, I, and S styles, so the FD22 C210-K set is one option in a wider range. Match the tip to the pad and component size you touch most. Fine-pitch work on small board areas rewards a precise tip, while general tinning and wire work tolerates more contact area. Keep a note of which tip suits which job on your bench, and your repair time per board drops.
Why Technicians Stock a 5 Pack
A single tip fails at the worst moment, usually mid-repair on a customer’s only phone. Five tips let you rotate through the workload, keep one tinned and ready, and swap a damaged tip in seconds instead of waiting on a delivery. Repair shops with several benches split one pack across stations and keep every iron ready. Browse the soldering stations, hot air stations, and microscopes categories on Mechanicpk to build a complete board-level setup around these tips.
Care and Tip Life
Tin the tip before you switch off, and wipe it on brass wool or a damp sponge between joints. Avoid heavy pressure on the pad, because force damages the plating faster than heat does. Check the tip seat inside your handle for old solder or corrosion before each swap. A clean seat gives a firm fit and a steady temperature reading, and a tip that stays tinned transfers heat evenly for longer.
| Weight | 0.30 kg |
|---|
Key Features
- ✓Five replacement tips in one pack
- ✓FD22 model in the C210-K series
- ✓Fits C210-compatible handles, including T210 and T26 style
- ✓Iron-plated copper construction
- ✓Smooth solder flow for clean joints
- ✓Precision-class tip for fine soldering and flying lead desoldering
- ✓Light 30 g pack that stores easily on a workshop bench
- ✓Works with C210-tip stations such as the 2UUL NT210 NextTip
Specifications
| Brand | 2UUL |
|---|---|
| Model | FD22 (C210-K Series), 5-tip pack |
| Category | Soldering Iron Tips |
| Compatibility | C210-compatible soldering handles (T210, T26 style) |
| Material | Iron-plated copper |
| Weight | 30 g (pack of 5) |
Common Repair Uses
- ✓Fine board-level soldering on mobile phone motherboards and general electronics repair.
- ✓Desoldering flying leads on phone motherboards
- ✓Jumper wire soldering on damaged tracks
- ✓Pad tinning before component fitting
- ✓Small SMD component replacement
- ✓Charging port and connector pad touch-up
- ✓Precision soldering in tight board areas
- ✓Rework around larger ICs alongside a hot air station
- ✓General PCB soldering work
Compatible Devices
- ✓Universal, not phone-model specific. The tip fits C210-compatible handles and works on smartphone boards of any brand.
- ✓C210-compatible soldering stations
- ✓T210 precision handle
- ✓T26 style handle
- ✓2UUL NT210 NextTip soldering station (supports C210 tips)
- ✓Android smartphone motherboards (universal tool, not model-specific)
- ✓iPhone motherboards (universal tool, not model-specific)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which soldering handles accept the 2UUL FD22 C210-K tip?
Can I fit the FD22 C210-K tip on a C115 or C245 handle?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



