QUICK 960-3C C-Type Chisel Soldering Tip for 960 Series

₨ 1

960-3C Soldering Tip With C-Type Chisel Head

The QUICK 960-3C is a replacement soldering tip listed for QUICK 960 series soldering stations. It carries a C-type chisel head, a shape that gives you a broad working edge for heating larger pads and through-hole joints. The overall length is 41.9 mm, so you can measure it against your worn tip before ordering. When a tip oxidizes or loses its shape, a matching chisel replacement restores joint quality faster than cleaning alone. Confirm your station belongs to the 960 series, because compatibility is confirmed at series level rather than per individual unit.

Out of stock

17 People watching this product now!
Description

960-3C Soldering Tip: Chisel Replacement for QUICK 960 Series

Your 960-3C soldering tip sits at the front of the workflow, so its shape decides how much heat reaches the joint. The QUICK 960-3C is a C-type chisel tip for the QUICK 960 series. On a repair bench, this tip handles work that technicians perform every day: heating wide solder pads, clearing through-hole leads, and dragging solder across short rows of pins. The chisel profile suits jobs that need surface contact instead of a fine point. Understanding where this tip fits helps you decide when to keep your current tip and when to replace it, which saves time on every joint you make afterward.

Where a C-Type Chisel Soldering Tip Helps on the Bench

A C-type chisel head presents a broader working edge than a conical or needle tip, so it transfers heat across a larger contact area. You rely on that area when you need to warm a wide copper pad or a through-hole connector without concentrating heat on one spot. Shape also changes how you wet a joint. A flat edge lets you lay solder along a row of leads and pull it through in one controlled movement, which suits connector pins and short runs of pads. Many technicians reach for a chisel during power section work, connector replacement, and general board cleanup, then switch to a finer tip for close-pitch ICs. Choose the correct shape before you start, and you spend far less time chasing cold joints that a mismatched tip created. Keeping one chisel ready on your bench means you never stop a repair to hunt for the right shape.

Matching This QUICK 960 Series Soldering Tip to Your Station

Compatibility for the 960-3C covers QUICK 960 series soldering stations at series level. Confirm that your station belongs to that series before you order, since a tip only performs as well as the station and handle that drive it. Measure your current tip’s overall length and compare it with the 41.9 mm specification of the 960-3C. Power the iron down and let it cool before you remove the old tip, then seat the new tip fully so it makes solid contact with the heater. Avoid forcing a tip that sits loosely, because a poor fit reduces heat transfer and leaves the working edge running cooler than the setting you chose.

Keeping Your 960-3C Soldering Tip Working Longer

Tin the tip as soon as it reaches working temperature, and keep a thin layer of solder on the working edge while the iron rests. Wipe the tip on a damp sponge or brass wool between joints to clear flux residue before it bakes onto the surface. Oxidized tips transfer heat poorly, so a dark, pitted chisel often causes slow, dull joints even when the station works perfectly. Keep idle time short, and reduce the station temperature during long breaks where your model supports that setting. Clean and tin the tip regularly, and you rebuild its shape less often. Replace the 960-3C soldering tip once the working edge can no longer hold tin, because cleaning will not restore its heat transfer at that stage.

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • C-type chisel head for a broad working edge
  • Overall length of 41.9 mm
  • Replacement tip for QUICK 960 series soldering stations
  • RoHS listed by the distributor

Specifications

BrandQUICK
Model960-3C
CategorySoldering Tip
CompatibilityQUICK 960 series soldering stations (series level)
DimensionsOverall length 41.9 mm

Common Repair Uses

  • Replacement chisel tip for heating and soldering on 960 series stations.
  • Heating wide copper pads during SMD component replacement
  • Reflowing through-hole connector pins on mainboards
  • Drag soldering short rows of pins with the chisel edge
  • Cleaning excess solder from pads and leads during board rework
  • Restoring a worn or oxidized tip shape on the station

Compatible Devices

  • QUICK 960 series soldering stations, verified at series level. Model-specific fit is not confirmed, so check your station model before ordering.
  • QUICK 960 series soldering stations (series-level compatibility)
  • Model-specific fit not confirmed; verify your station model before ordering

FAQ

What is the product name?
The product name is QUICK 960-3C C-Type Chisel Soldering Tip.
What is the brand of this product?
The brand of this product is QUICK.
What is the model of this product?
The model of this product is 960-3C.
What is this product used for?
This product is used for heating and soldering joints with a chisel-shaped working edge on QUICK 960 series stations.
Which devices are compatible with this product?
This product is compatible with QUICK 960 series soldering stations, verified at series level.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the overall length of the 960-3C soldering tip?
The 960-3C soldering tip has an overall length of 41.9 mm.
What is the head shape of the 960-3C soldering tip?
The 960-3C soldering tip uses a C-type chisel head.