2UUL BS183 Black Skull Solder Paste 183℃ 50g

₨ 1,600

183℃ Black Skull Solder Paste

The 2UUL BS183 Black Skull is a 183℃ solder paste in a 50g jar, made for SMT and reflow soldering on phone PCBs. You get consistent paste transfer, stable thermal behaviour, and strong adhesion that holds small components in place while the joint heats. It reduces cold joints on delicate boards such as smartphones, computers, game consoles, and automotive PCBs. Use it after IC change karna, connector rework, or pad rebuilding, and pair it with your hot air station and PCB holder. Mechanicpk supplies the BS183 to repair shops and technicians across Pakistan who want a reliable 183℃ paste.

In stock

10 People watching this product now!
Description

BS183 Solder Paste for Mobile Repair: 183℃ Black Skull Formulation

The 2UUL BS183 solder paste for mobile repair puts a 183℃ black paste in a 50g jar, built for SMT and reflow soldering on dense phone boards. Mechanicpk stocks it for technicians who rebuild joints on smartphone, computer, game console, and automotive PCBs and want controlled paste transfer instead of guesswork. The Black Skull range from 2UUL includes more than one melting-point variant, and the BS183 covers the 183℃ position. That figure sets your reflow window, so you plan hot air temperature, preheat, and dwell time around it before you touch the board.

What the 183℃ Melting Point Means at Your Bench

The BS183 sits above the 148℃ BS148 variant in the same series, so you choose it when your job calls for the higher melting point. You bring the joint above 183℃ for a short, controlled time, then pull heat away as the paste flows and wets the pad. Dead phone repairs demand that discipline, because neighbouring components sit close together and overheat quickly. Pair the paste with a preheating setup and a PCB holder so the board heats evenly and stays still while the paste reflows. If you switch from another brand, test on a scrap pad first, since each paste wets and flows slightly differently.

Paste Behaviour You Can Plan Around

The supplier information lists consistent paste transfer, stable thermal performance, improved adhesion for SMT components, and fewer cold joints. Consistent transfer matters when you apply paste with a fine tip or through a stencil, because uneven volume causes bridging on one pad and a weak joint on the next. Strong adhesion keeps small passives in position while you bring heat up, so fewer parts shift during a hot air pass. The 50g jar lasts through many repair jobs, and the supplier describes it as easy to dispense and store with long shelf life. Keep the lid closed between jobs so the paste stays workable.

Where BS183 Fits in Your Repair Workflow

You reach for this paste once you locate the hardware fault. Typical cases include a charging issue traced to a damaged charging IC, a display problem tied to a lifted connector pad, or a hang on logo fault from a failed power component. Clean the pads, apply a thin, even layer, place the part, and reflow under your hot air station while you watch the joint under a microscope. Check the result with a multimeter before you reassemble the board. If the job involves BGA work, review the Reballing Kits category for stencils that match the ball size, and use a Soldering Station for touch-up around the finished joint.

Building Your Rework Setup Around BS183

A paste only performs as well as the heat source behind it. If you still work with a basic setup, the Hot Air Stations and Soldering Stations categories give you the upgrade path toward tighter temperature control. Technicians who also handle flash and storage faults will find ISP Pinout Tools, eMMC Programmers, UFS Adapters, and Test Boxes in the same catalog, so one repair bench covers both the software side and the soldering side of a job. Add Microscopes and PCB Holders to the order and you build a complete workstation from a single supplier.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • 183℃ melting point
  • Black Skull series paste from 2UUL
  • 50g jar, easy to dispense and store
  • Designed for SMT and reflow soldering
  • Consistent paste transfer
  • Stable thermal performance
  • Improved adhesion for SMT components
  • Reduced cold joints and voiding on delicate boards

Specifications

Brand2UUL
ModelBS183
CategorySolder Paste
CompatibilityUniversal — SMT and reflow soldering on PCBs
Supported DevicesSmartphone, computer, game console, and automotive PCBs
TechnologyBlack Skull solder paste, 183℃ melting point
Weight50g

Common Repair Uses

  • Real repair scenarios for a 183℃ SMT solder paste
  • IC change karna after removing a faulty IC and cleaning the pads
  • Reflow soldering of SMT components with hot air
  • Rebuilding lifted or damaged pads on mobile boards
  • Connector and small passive rework
  • Repairs for charging issue and display problem faults after locating the hardware fault
  • Repairs for hang on logo faults caused by failed power components
  • Reducing cold joints on delicate boards

Compatible Devices

  • Universal solder paste, not device-specific; the supplier lists these board types
  • Smartphone motherboards and PCBs
  • Computer and laptop PCBs
  • Game console PCBs
  • Automotive PCBs
  • SMT components used across these board types

FAQ

What is the product name?
The product name is 2UUL BS183 Black Skull Solder Paste 183℃ 50g.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is BS183.
What is this product used for?
This product is used for SMT and reflow soldering on PCBs, including IC change, connector rework, and pad rebuilding on mobile boards.
Which devices are compatible with this product?
This product is a universal solder paste, not device-specific. The supplier lists smartphone, computer, game console, and automotive PCBs as suitable board types.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What temperature does 2UUL BS183 solder paste melt at?
BS183 has a 183℃ melting point. Bring the joint above that temperature for a short, controlled time during reflow. The supplier publishes no station-specific profile, so test your hot air settings on a scrap board first.
What is the difference between 2UUL BS148 and BS183 solder paste?
Both belong to the 2UUL Black Skull series. BS148 melts at 148℃ and BS183 melts at 183℃, so choose the variant that matches the reflow temperature your job allows.