Mechanic C90-UV Camera Blue Light Adhesive for Phones
₨ 699
UV Blue Light Adhesive for Camera Repair
Mechanic C90-UV Camera Blue Light Adhesive gives you a thick, UV-curing glue for fixing the package during blue-ray camera replacement on phones, iPads, and tablets. You apply the C90-UV camera blue light adhesive, expose it to a UV lamp, and it cures into an encapsulation that strengthens the repaired module. The thicker body suits precise placement around a camera package, and Mechanic positions it beside its C89 anti-shake and C91-UV filter adhesives, so you pick the right glue for each camera job. Keep a UV curing lamp on your bench, because this adhesive needs UV illumination to cure.
In stock
Mechanic C90-UV Camera Blue Light Adhesive for Mobile Camera Repair
Mechanic C90-UV Camera Blue Light Adhesive handles one precise job on your repair bench: it fixes and encapsulates the package when you replace a blue-ray camera component. This C90-UV camera blue light adhesive cures under UV illumination, so you decide exactly when the glue sets. Mechanic supplies it for mobile phone, iPad, and tablet camera repair, which puts it in the consumables drawer next to your microscope, hot air station, and PCB holder. If your shop handles camera hardware faults every week, a dedicated camera adhesive saves you from improvising with the wrong glue and risking a repeat visit from the customer.
Thicker UV-Curing Formulation
Mechanic describes C90-UV as the thicker adhesive in its camera glue range. A thicker body holds its position where you dispense it, and the curing step then hardens it into a firm encapsulation that strengthens the fixed component. The adhesive needs UV illumination to cure, so keep a UV curing lamp within reach of your microscope. Aim the lamp so its light reaches the glue line directly, because UV cannot cure glue it cannot reach. Uncured glue stays soft and weakens the repair, so confirm the cure before you move to reassembly.
Where C90-UV Fits in a Camera Repair Workflow
Camera jobs start with diagnosis. You confirm the fault sits in the camera module and decide whether the repair needs a blue-ray component replacement. When it does, C90-UV enters at the fixing stage. You dispense a small amount around the package under magnification, seat the part, and cure the glue under your UV lamp. After the cure, you reassemble the module and test the camera for focus, image clarity, and stability before you return the device to the customer. The same sequence applies to iPad and tablet cameras, because Mechanic positions this adhesive for all three device types. Keep the bead small and clean. Excess glue near the optical path creates a new hardware fault, so use moderation and inspect the finished joint under your microscope.
Choosing the Right UV Adhesive for Mobile Camera Repair
Mechanic sells three camera adhesives that look alike on a shelf and do different jobs. C89 is the anti-shake adhesive that fills the optical stabilization holes. Mechanic lists it for all Apple cameras and cameras with motors and recommends moderate use. C91-UV is the more diluted filter adhesive for CMOS filter replacement, and it also needs UV illumination. C90-UV is the thicker blue-ray adhesive for package fixing during blue-ray camera replacement. Match the glue to the job before you open the module, and stock all three if camera repair makes up a regular share of your workload.
Repair shops, service centers, and training institutes buying consumables in bulk get the most from this adhesive when they pair it with a reliable UV lamp and a good microscope. Add soldering stations, reballing kits, and test boxes from the same Mechanicpk catalog, and one order covers your camera bench and your board-level bench together.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Thick blue-ray camera adhesive formulation, thicker than Mechanic’s C91-UV filter adhesive
- ✓Cures under UV illumination, so you control when the glue sets
- ✓Cures into an encapsulation that strengthens the fixed package
- ✓Built for package fixing during blue-ray camera replacement
- ✓Suits mobile phone, iPad, and tablet camera repair
- ✓Sits in a range with C89 anti-shake and C91-UV filter adhesives for different camera jobs
- ✓Works with your microscope and UV lamp for precise, inspected application
- ✓Mechanic-branded camera repair consumable for professional repair benches
Specifications
| Brand Entity | Mechanic |
|---|---|
| Product Entity | Mechanic C90-UV Camera Blue Light Adhesive |
| Technology Entity | UV-curing adhesive, UV illumination curing |
| Compatible Device Entities | Mobile phones, iPad, tablets |
| Repair Process Entity | Blue-ray camera replacement, camera package fixing and encapsulation |
| Industry Entity | Mobile phone repair, Pakistan repair market |
Common Repair Uses
- ✓Fixing the package during blue-ray camera replacement
- ✓Strengthening the repaired camera module through UV-cured encapsulation
- ✓Phone camera hardware fault repair
- ✓iPad and tablet camera repair
- ✓Camera module rework at professional repair benches
Compatible Devices
- ✓Mobile phone, iPad, and tablet camera repair. Mechanic does not publish a model-level device list for this adhesive.
- ✓Mobile phone cameras
- ✓iPad cameras
- ✓Tablet cameras
- ✓Blue-ray camera components that need package fixing during replacement
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does Mechanic C90-UV cure without a UV lamp?
What is the difference between Mechanic C90-UV and C91-UV?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



