2UUL SC98 Gold Plated FPC Connector Reballing Solder Bar
₨ 1,300
2UUL SC98 FPC Reballing Bar Set
The 2UUL SC98 is a gold-plated FPC connector reballing solder bar set for technicians who tin flex connector pads on phone and tablet logic boards. You get three pure copper ball-head bars and an ultralight carbon fiber holder. The rounded heads spread solder evenly and protect your pads and connector sockets from scratches. The 12 g set is universal, so you use it on any board with FPC connectors, from charging issue repairs to display problem jobs. Mechanicpk supplies the SC98 to repair shops and service centers across Pakistan that need a precise, repeatable tool for connector tinning and tin suction desoldering.
Out of stock
FPC Connector Reballing Solder Bar for Clean Pad Tinning
The 2UUL SC98 FPC connector reballing solder bar set gives your bench a dedicated tool for tinning fine-pitch flex connector pads on phone and tablet logic boards. You get three gold-plated ball-head bars and an ultralight carbon fiber holder in one package. The rounded head moves solder across each pad without sharp edges, so you protect the board and the connector socket while you work. Mechanicpk supplies it to technicians who handle display problem, charging issue, and loose-contact hardware fault jobs every day. On those jobs, one weak FPC joint keeps the repair from closing.
Gold-Plated Copper Ball Heads That Tin Fast
Each bar in the set uses pure copper with gold plating. The gold layer adds conductivity and corrosion resistance, so the surface stays clean and takes solder quickly, pad after pad. The ball-head shape drags tin evenly across a connector pad row and fills each pad fast. You avoid the sharp corners that dig into solder mask. A rushed tinning job with a sharp tip is how a good pad lifts on a board that already carries a hardware fault.
The round head also reaches inside tight connector footprints without brushing neighbouring components. That control matters on flex connectors, where pad spacing leaves almost no room for error. If you drag tin with a plain iron tip today, the SC98 gives you a smoother, more repeatable result with a lower risk of scratching the pad.
Position in Your FPC Connector Repair Workflow
Start by lifting the damaged connector with your hot air station, then clean the pads with flux and your soldering station. Mount the board in a PCB holder and check pad condition under your microscope before you tin. Heat the joint with your soldering iron and move the ball head across the pad row to spread solder until each pad carries an even layer. The same bar handles tin suction desoldering on an FPC connector when you need to clear excess solder before you seat a new part.
After tinning, confirm continuity with a multimeter. On a dead phone, check current draw with your test box or power supply before you close the board. Technicians who already own a reballing kit use the SC98 for the connector stage of PCB repair, where pad-level control decides whether the new connector sits flat and makes full contact.
Handle, Weight, and Bench Handling
The set weighs 12 g net and ships in a 158 × 39 × 15 mm package, so it fits in a drawer next to your tweezers and flux. The ultralight carbon fiber holder keeps hand fatigue low during long sessions of connector rework. The simple shape cleans up quickly after use. Three bars come in the set, which gives you spare heads when one picks up residue.
The SC98 is universal and not tied to one phone model. You use the same tool on any board that carries FPC connectors, whether the job is a charging flex connector, a display connector, or a loose-contact fault that kept a phone dead after repair. Pair it with your preferred solder paste and flux, and it covers the connector-tinning step in your daily workflow.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Three gold-plated ball-head bars in one set
- ✓Ultralight carbon fiber holder that reduces hand fatigue
- ✓Pure copper construction with gold plating
- ✓Round ball-head design that avoids edges and scratches
- ✓Even, fast, full tinning on connector pads
- ✓Easy to operate in confined spaces
- ✓Lightweight 12 g set that stores easily on the bench
- ✓Universal use across boards with FPC connectors
Specifications
| Brand | 2UUL |
|---|---|
| Model | SC98 |
| Category | Reballing Tools / FPC Connector Tinning |
| Compatibility | Universal FPC connector reballing and tinning (not device-specific) |
| Technology | Ball-head tin dragging bar design with gold plating |
| Material | Pure copper, gold plated |
| Weight | 12 g (net) |
| Dimensions | 158 × 39 × 15 mm (package size) |
Common Repair Uses
- ✓Real bench scenarios for FPC connector work.
- ✓FPC connector reballing
- ✓Tinning pads on a connector footprint
- ✓Tin suction desoldering of FPC connectors
- ✓Repairing loose-contact or disconnected FPC connectors
- ✓Fine soldering in confined spaces
- ✓Pad preparation before seating a replacement connector
Compatible Devices
- ✓Universal FPC connector scope. The tool is not tied to a specific phone model, brand, or chipset family.
- ✓Smartphone logic board FPC connectors
- ✓Tablet logic board FPC connectors
- ✓Flex cable connector pads on mobile motherboards
- ✓Connector pads on boards from any phone brand
- ✓Loose or damaged FPC connector footprints
- ✓General fine-pitch connector pads on electronic boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the difference between the 2UUL SC98 and the SC96?
Can the SC98 handle tin suction desoldering on an FPC connector?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



