2UUL FD24 C210-S Soldering Iron Tip for Mobile Repair
₨ 700
Fine S-Type C210 Tip for Micro-Soldering
The 2UUL FD24 C210-S soldering iron tip adds a fine S-type working point to your C210 soldering handle. It targets SMD pads, charging port pins, connector rows and small BGA pads on mobile phone, tablet and laptop boards. 2UUL builds the FD24 on the C210 cartridge interface, so it fits T210, T26, A9 and Find210 style handles. Pair it with your microscope and soldering station for clean micro-soldering, jumper lagana and charging issue repairs on your repair bench. Check your handle type before ordering, because this tip uses the C210 interface and does not fit T12 handles.
In stock
2UUL FD24 C210-S Soldering Iron Tip for Fine-Pitch Board Work
The 2UUL FD24 C210-S soldering iron tip gives your C210 handle a fine S-type working point for jobs where a wider tip crowds the pad. 2UUL builds the FD24 on the C210 cartridge interface, so it drops into T210-style handles and C210-compatible stations without adapters. On a logic board bench, the S profile lets you reach small SMD pads, charging flex pads and tight connector rows while neighbouring components stay clear. Mechanicpk supplies this tip to technicians who already run a C210 soldering station and need a precise working tip or a spare for daily hardware fault repairs.
Cartridge Design and Station Fit
The C210 range uses a cartridge-style tip, so the heating element and the working point sit together in one replaceable unit. You swap the whole tip when it wears out instead of rebuilding a separate heater. 2UUL lists its C210 tips for JBC T210, Sugon T26, Aifen A9 and 2UUL Find210 handles, and the 2UUL NT210 NextTip station detects C210 tips automatically. Yihua 982-series stations accept the same cartridge type when you fit the C210 handle.
Not every C210 handle matches every C210 tip perfectly, because clone handles vary. Confirm your handle brand before you buy, and keep in mind that T12 and C245 handles use different interfaces and will not accept this tip.
Where the S-Type Point Works on the Board
Fine-point S-type tips earn their place on dense boards. You use the FD24 for SMD component soldering, reflowing small BGA pads and tinning pads on mobile phone, tablet and laptop logic boards. Charging port repair is a daily use: the narrow point lets you reflow USB and Type-C pins and clean up bridges between them without lifting neighbouring pads. The same point handles headphone jack contacts, FPC connector pads and the thin traces you touch when you jumper lagana on a damaged track.
Run the tip under a microscope for the best control. When a repair needs IC change karna, pull the chip with your hot air station first, then use the FD24 to clean the pads and tin them. Move to your reballing kit once the pads sit flat. A PCB holder keeps the board steady, and a multimeter in diode mode confirms each joint before you close the phone.
Workflow Fit and Tip Care
The FD24 sits at the finishing end of a repair, after chip removal and before testing. Dead phone boards, charging issue cases and display problem repairs all end with small joints that need accuracy more than heat mass. Technicians who do high volume work keep a spare S-type tip beside the active one, so a worn point never stalls a job.
Look after the tip and it works longer. Wipe it on your cleaning pad, re-tin it after each session and store it with a fresh coat of solder. Set the temperature on your station to suit the solder and the pad size, and avoid dragging heavy force across the point. A tinned, clean tip transfers heat quickly and gives you shiny, solid joints on the first pass.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Fine S-type working point for precision micro-soldering
- ✓C210 cartridge interface for T210-style handles
- ✓Works with T26, A9 and Find210 handles per 2UUL’s compatibility listing
- ✓Cartridge format lets you swap the full tip in seconds
- ✓Iron-plated copper construction
- ✓Suits SMD, BGA pad and connector work on phone, tablet and laptop boards
- ✓Fits beside microscope, hot air station and PCB holder workflows
- ✓Gives your repair bench a spare working point for daily volume jobs
Specifications
| Brand | 2UUL |
|---|---|
| Model | FD24 (C210-S Series) |
| Category | Soldering Iron Tips |
| Compatibility | C210 cartridge-interface handles and stations (T210, T26, A9, Find210) |
| Supported Devices | Not device-specific; used on mobile phone, tablet and laptop logic boards |
| Technology | C210 cartridge-style S-type fine-point tip |
| Material | Iron-plated copper |
Common Repair Uses
- ✓Real-world soldering jobs where the fine S-type point fits
- ✓SMD component soldering on mobile phone logic boards
- ✓Reflowing and tinning small BGA pads
- ✓Charging port repair on USB and Type-C pins
- ✓Jumper wire soldering on damaged tracks
- ✓FPC and connector pad soldering
- ✓Headphone jack and small port contact repair
- ✓Laptop and tablet motherboard micro-soldering
- ✓Pad cleaning and tinning after IC change karna
Compatible Devices
- ✓Verified compatibility scope is the C210 handle and station family, not individual phone models
- ✓JBC T210 handle
- ✓Sugon T26 and T26D stations
- ✓Aifen A9 stations
- ✓2UUL Find210 handle and station
- ✓2UUL NT210 NextTip station (automatic C210 tip detection)
- ✓Yihua 982-series stations with the C210 handle
- ✓Mobile phone logic boards (universal tip, not phone-model specific)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which soldering handles and stations accept the 2UUL FD24 C210-S tip?
Can I use the FD24 C210-S tip on a T12 or C245 soldering handle?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



