2UUL BA16P Back Cover Sealing Adhesive for iP16 Pro

₨ 900

Pre-Cut iPhone 16 Pro Back Cover Adhesive

The 2UUL BA16P Back Cover Sealing Adhesive for iP16 Pro (5pcs/Pack) gives your repair bench a pre-cut, double-sided seal for the iPhone 16 Pro rear glass. You lift the back cover for a battery swap, charging port job or board-level hardware fault repair, then reseal the panel with an adhesive cut for the iP16 Pro instead of trimming generic tape by hand. The seal helps restore the dust and water resistance a reopened device loses. Each pack holds five pieces, so one purchase covers five back cover reseals. Mechanicpk supplies this iPhone 16 Pro back cover adhesive to technicians and service centers across Pakistan.

In stock

18 People watching this product now!
Description

iPhone 16 Pro Back Cover Adhesive: 2UUL BA16P Sealing Pack

Every back glass job on an iPhone 16 Pro ends the same way: you clean the frame, test the phone, and seal the panel. The 2UUL BA16P Back Cover Sealing Adhesive for iP16 Pro (5pcs/Pack) handles that last step. This iPhone 16 Pro back cover adhesive arrives pre-cut and double-sided, so you skip hand-trimming tape from a roll and place a shaped seal around the rear panel perimeter. 2UUL sells a wider back cover sealing adhesive range for iPhone 14 to 17 series phones, and the BA16P is the pack named for the iP16 Pro. Mechanicpk stocks it for technicians and service centers that reseal rear glass often and want the same predictable result on every phone that leaves the bench.

How the BA16P Back Cover Sealing Adhesive Works on iPhone 16 Pro

The iPhone 16 Pro back glass bonds to the frame along its perimeter. When you cut that bond to reach the battery, the rear glass connector or the logic board, you destroy the factory seal, and the phone stops keeping dust and moisture out the way it did before. The BA16P replaces that perimeter seal. 2UUL describes its back cover sealing adhesive as a way to restore dust and water resistance after a technician removes the back cover. Read that as a rebuilt sealing barrier, not a guaranteed rating. The result depends on how clean both surfaces are and how evenly you press the panel down. 2UUL lists no IP rating for this adhesive, so never promise a customer a specific water resistance figure. This pack targets the iP16 Pro only, so match the correct 2UUL model to each phone you service instead of reusing this one across other iPhone variants.

Where It Fits in Your Back Glass and Battery Repair Workflow

Plan the BA16P as the closing step of any job that opens the rear panel: back glass replacement, battery change, charging port repair or a board-level hardware fault. Heat the perimeter, cut the old bond, and finish the repair on a PCB holder with a hot air station or soldering station and a microscope for inspection. Test the phone before you seal it. Power it on, check the display, charging and network, then power it down. A multimeter check on the battery line at this stage saves you from reopening a sealed phone.

Once the phone passes, remove every trace of old adhesive from the glass and the frame, and wipe both surfaces with isopropyl alcohol above 90 percent on a lint-free cloth. Work in a dust-free area, because particles trapped under the adhesive weaken the bond and leave gaps along the edge. Align the adhesive over the frame, lay the back cover on, and press the panel evenly under steady weight so the bond sets across the full perimeter. Buy your hot air stations, soldering stations, microscopes, multimeters and PCB holders from Mechanicpk and you keep the whole reseal workflow on one bench.

Why Technicians Stock the 5-Piece Pack

Plan on one piece per back cover, so each pack covers five phones. That matters in a repair shop or service center where iPhone back glass jobs come in regularly and customers expect the phone back the same day. A pre-cut iPhone 16 Pro back glass adhesive removes the guesswork of cutting tape by hand around the camera area and the frame edges, which keeps your reseals consistent from the first phone to the fifth. A seal that does not sit evenly lets dust in, so the fit of the adhesive decides the quality of the finished repair as much as the glass itself. Keep a pack at the bench next to your repair stock, and reorder before the last piece runs out so a back glass job never stalls for want of adhesive.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut sealing adhesive made for the iP16 Pro back cover
  • Double-sided adhesive layer bonds the rear glass to the frame
  • Helps restore dust and water resistance after the back cover comes off
  • Five pieces per pack, enough for five back cover reseals
  • Removes the need to hand-trim generic tape around the panel perimeter
  • Suits back glass replacement jobs on the iPhone 16 Pro
  • Fits the final step after battery, charging port or board-level repair
  • Belongs to the 2UUL back cover sealing adhesive range covering iPhone 14 to 17 series

Specifications

Brand Entity2UUL
Product Entity2UUL BA16P Back Cover Sealing Adhesive for iP16 Pro (5pcs/Pack)
Technology EntityPre-cut double-sided back cover sealing adhesive
Compatible Device EntitiesApple iPhone 16 Pro (iP16 Pro)
Repair Process EntityiPhone back glass replacement and back cover resealing
Industry EntityMobile phone repair, Pakistan

Common Repair Uses

  • Resealing the iPhone 16 Pro rear panel after it has been opened
  • Back glass replacement on the iPhone 16 Pro
  • Resealing the back cover after a battery replacement
  • Resealing after charging port repair
  • Closing the phone after logic board or hardware fault repair
  • Resealing after back glass connector service
  • Restoring a dust and moisture barrier after any rear panel removal

Compatible Devices

  • Verified scope is device-specific: Apple iPhone 16 Pro (iP16 Pro)
  • Apple iPhone 16 Pro rear back cover glass
  • Device-specific to the iP16 Pro, not a universal adhesive

FAQ

What is the product name?
The product name is 2UUL BA16P Back Cover Sealing Adhesive for iP16 Pro (5pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is BA16P.
What is this product used for?
This product is used for resealing the back cover glass of an iPhone 16 Pro after a back glass, battery, charging port or board-level repair.
Which devices are compatible with this product?
This product is compatible with the Apple iPhone 16 Pro (iP16 Pro).
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the 2UUL BA16P adhesive be used on other iPhone 16 models?
The BA16P is the 2UUL back cover sealing adhesive named for the iP16 Pro. 2UUL lists separate back cover sealing adhesive for other iPhone 14 to 17 series models, so choose the matching 2UUL model for each phone.
Does the BA16P adhesive restore waterproofing on an iPhone 16 Pro?
2UUL positions its back cover sealing adhesive to help restore dust and water resistance after the back cover comes off. No IP rating is published for the adhesive, so do not promise a repaired phone a specific water resistance level.