2UUL BA16 Back Cover Sealing Adhesive for iP16 (5pcs/Pack)

₨ 900

iPhone 16 Back Cover Sealing Adhesive

The 2UUL BA16 Back Cover Sealing Adhesive for iP16 (5pcs/Pack) gives your bench five pre-cut, double-sided seals for the iPhone 16 rear housing. Each piece matches the back cover frame, so you skip trimming and guesswork after a back glass swap or an internal repair. Pair it with a heated press, such as the 2UUL DA07 Mini Hot Press Station, to bond the cover and restore the phone’s airtightness. This iPhone 16 back cover sealing adhesive suits repair shops that reseal iPhone 16 units daily and want consistent results from one pack to the next.

In stock

11 People watching this product now!
Description

iPhone 16 Back Cover Sealing Adhesive Built for Back Glass Resealing

The 2UUL BA16 Back Cover Sealing Adhesive for iP16 (5pcs/Pack) is a pre-cut, double-sided adhesive that reseals the iPhone 16 back cover after you open it. The iPhone 16 gives you access to the internals from the back, so every battery swap, board-level repair, and back glass replacement ends with the same job: closing the phone with a seal that holds. This iPhone 16 back cover sealing adhesive handles that job. The 2UUL BA series covers iPhone 14 to 17 models, and 2UUL cuts the BA16 version for the standard iPhone 16. Each pack holds five pieces, so you finish five resealing jobs before you reorder.

Why a pre-cut seal matters on the iPhone 16 rear frame

Hand-cut tape leaves gaps at corners and uneven widths along the frame edge. A pre-cut piece removes that variable. You lift the liner, align the piece on the frame, and the cutout follows the contour of the housing. The double-sided construction bonds the frame to the glass, and heat pressing restores the airtightness the factory seal gave the phone. 2UUL’s instructions call for a heated press and name its DA07 Mini Hot Press Station, although any comparable heating pressure press fits the same step. Treat the press as part of the process, not an optional extra. Water resistance depends on how well you apply the adhesive, so a clean frame, correct alignment, and even pressure decide the result more than the tape alone.

How the BA16 fits into your iPhone 16 repair workflow

Most iPhone 16 jobs that reach this step start with a customer problem: a dead phone, a charging issue, a boot loop issue, a cracked back glass, or a hardware fault that needs board access. You remove the back cover, work on the fault, and test the phone before you seal it. Under a microscope, check the frame for deformation and leftover residue. Clamp the board in your PCB holders for any rework, use your hot air station or soldering station for the IC-level repair, and confirm voltage and continuity with a multimeter before you close the phone. Once the phone powers on and behaves, you clean the frame, apply one BA16 piece, seat the back cover, and press it with heat. That sequence turns an open phone into a finished repair that you can hand back with confidence.

Surface prep decides how well the new seal grips. Strip every trace of old adhesive from the frame and the back cover edge, then wipe both surfaces with isopropyl alcohol above 90 percent on a lint-free cloth. Let the alcohol evaporate before you lay the tape. Dust, oil, or old residue under the new piece creates weak spots, and those weak spots show up later as a loose back cover or a failed seal.

Repair shops that handle iPhone 16 units every day benefit most from a five-piece pack. You keep a seal on the bench for each reassembly, so no phone leaves your workshop with an unsealed back cover because you ran out of tape. Service centers and training institutes can use the same pack to teach a repeatable resealing routine, from frame cleaning to heat pressing.

Choosing the right variant for your shop

The BA16 targets the standard iPhone 16. The iPhone 16 Plus, 16 Pro, and 16 Pro Max have different frame dimensions, so each needs an adhesive cut for that exact model. Confirm the model on the phone before you open the pack, and use one piece per phone. If you stock the BA series across iPhone generations, label each pack by model name so your technicians pick the correct cut every time. Mechanicpk supplies mobile repair accessories alongside the heated press, microscope, and board-holding tools that this repair step depends on, so you can build the full resealing station from one source.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut for the iPhone 16 rear frame, so no trimming is needed
  • Double-sided adhesive that bonds the back cover to the frame
  • High-adhesion tape built to stay in place over long use
  • Heat-press application restores airtightness (2UUL cites IP67-level)
  • Works with the 2UUL DA07 Mini Hot Press Station or another heated press
  • Supports a simple routine: clean the frame, align the tape, press with heat
  • Suits both poor-seal repairs and full back cover replacements
  • Five pieces per pack for repeated jobs on the same bench

Specifications

Brand2UUL
ModelBA16
CategoryiPhone Back Cover Sealing Adhesive
CompatibilityApple iPhone 16 (standard model)
Supported DevicesiPhone 16
TechnologyPre-cut double-sided sealing adhesive, applied with a heated press (5 pieces per pack)

Common Repair Uses

  • Resealing the iPhone 16 back cover after any repair that opens the rear housing.
  • Resealing after an iPhone 16 back glass replacement
  • Closing the phone after a battery replacement
  • Resealing after board-level repair on a dead phone
  • Reassembly after a charging issue repair
  • Reassembly after a boot loop issue repair
  • Replacing a worn or failed factory back cover seal
  • Restoring dust and water resistance after any internal repair
  • Training technicians on frame cleaning, alignment, and heat pressing

Compatible Devices

  • Apple iPhone 16 (standard model) rear housing. Other iPhone 16 variants need an adhesive cut for their own model.
  • Apple iPhone 16 (standard model)
  • iPhone 16 units with a replaced back glass
  • iPhone 16 units with a cracked back glass
  • iPhone 16 units with a worn or failed factory back cover seal

FAQ

What is the product name?
The product name is 2UUL BA16 Back Cover Sealing Adhesive for iP16 (5pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is BA16.
What is this product used for?
This product reseals the iPhone 16 back cover after a back glass replacement or an internal repair.
Which devices are compatible with this product?
This product is compatible with the standard Apple iPhone 16.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL BA16 need a heat press to seal the iPhone 16 back cover?
The 2UUL instructions pair the BA series with a heated press, such as the 2UUL DA07 Mini Hot Press Station or another heating pressure press, to bond the cover and restore IP67-level airtightness.
Does the BA16 fit the iPhone 16 Plus, 16 Pro, or 16 Pro Max?
The BA16 targets the standard iPhone 16. The 16 Plus, 16 Pro, and 16 Pro Max have different frame dimensions, so buy an adhesive cut for the exact model.