2UUL BA16PM Back Cover Sealing Adhesive iPhone 16 Pro Max

₨ 900

iPhone 16 Pro Max Back Glass Seal

The 2UUL BA16PM is a pre-cut, double-sided back cover sealing adhesive made for the iPhone 16 Pro Max. It replaces the factory seal after you open the rear glass for battery, camera, or logic board work, and it restores airtightness when you heat-press the back cover down. The model-specific cut follows the frame, so you align the strip once and skip hand trimming. Each pack holds five pieces for five back glass jobs. Repair shops in Pakistan can stock it at Mechanicpk next to hot air stations, PCB holders, and microscopes.

In stock

12 People watching this product now!
Description

iPhone 16 Pro Max Back Cover Sealing Adhesive for Precise Rear Glass Resealing

The iPhone 16 Pro Max back cover sealing adhesive from 2UUL, model BA16PM, gives your bench a pre-cut double-sided seal made for the rear glass of one phone: the iPhone 16 Pro Max. Technicians open that back glass for battery work, camera service, and logic board access, and every opening cuts through the factory adhesive. The 2UUL BA16PM replaces that seal, so the glass returns to the frame with even contact around the full perimeter. Each pack holds five pieces, which covers five back glass jobs on a single purchase order.

Where BA16PM Fits in Your Repair Workflow

Sealing is the last physical step of any iPhone 16 Pro Max rear-side repair. You separate the glass with heat and an opening pick, finish the hardware fault repair, test the phone with the back glass still open, then apply fresh adhesive before you close the device. Skipping that step leaves a loose panel and an open path for dust and moisture. The pre-cut shape follows the frame outline, so you align it once and skip the hand trimming. That matters on a busy bench, where an uneven hand-cut strip sends the phone back to you as a callback. A microscope helps you inspect the frame edge for old residue, and a PCB holder keeps the phone steady while you lay the iPhone 16 Pro Max back glass adhesive down.

Cracked rear glass drives much of the demand. A cracked iPhone 16 Pro Max back glass needs a full glass swap, and the swap needs fresh adhesive on the frame before the new glass goes on. Battery replacement follows the same path: the battery sits behind the glass, so you open it, swap the cell, and reseal. Rear camera and front camera service reach the internals the same way. Each job ends with a new BA16PM strip, which gives the customer a firm, flush back panel when the phone leaves your bench.

Heat-Press Application Process

2UUL’s instructions for the BA series call for three actions. You clean the iPhone frame and inspect it for deformation, apply the sealing tape to the frame, and then press the back cover down with heat and pressure. The manufacturer names its DA07 Mini Hot Press Station for the pressing step, and any comparable heating press works as well. Thermal sealing restores the airtight seal the phone had when it left the factory. Frame deformation matters at this stage: a bent edge blocks even contact, so check the frame before you open the pack. Your hot air station handles glass removal on the way in, and the heat press handles the seal on the way out.

Why Technicians Choose This Back Glass Adhesive Pack

Model-specific adhesive removes guesswork. BA16PM targets the iPhone 16 Pro Max, and 2UUL sells separate BA variants for other iPhone models, so you match the code to the phone on your bench instead of adapting a universal strip. The five-piece pack suits shops that run back glass replacement, battery replacement, and rear camera service on the same model, since each of those jobs consumes one seal. Mechanicpk stocks the adhesive alongside Hot Air Stations, Soldering Stations, Multimeters, Reballing Kits, and ISP Pinout Tools, so a repair shop in Pakistan can fill the whole workflow from one order.

BA16PM seals the rear glass only. The display side uses a different adhesive, so order a screen sealing adhesive separately for display replacement jobs. Check the model before you open the pack: the 16 Pro Max frame differs from the 16 Pro, and the adhesive follows the frame shape. Store unused pieces flat, away from heat and dust, so the next job starts with a clean strip. Plan your stock on the pack count: five phones, five seals.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut for the iPhone 16 Pro Max back cover frame
  • Double-sided sealing adhesive
  • Restores airtightness through heat-press sealing
  • Suits back cover replacement and weak-seal repair
  • Works with the 2UUL DA07 Mini Hot Press Station or another heating press
  • Five pieces per pack for five jobs
  • Model-specific cut, no hand trimming
  • Part of the 2UUL BA series for iPhone 14 to 17 series back covers

Specifications

Brand2UUL
ModelBA16PM
CategoryBack Cover Sealing Adhesive
CompatibilityiPhone 16 Pro Max (model-specific)
Supported DevicesiPhone 16 Pro Max
TechnologyPre-cut double-sided adhesive, heat-press sealing
Pack Quantity5 pcs per pack

Common Repair Uses

  • Resealing the rear glass of the iPhone 16 Pro Max after it is opened or replaced.
  • Back glass replacement
  • Resealing after battery replacement
  • Resealing after rear camera service
  • Resealing after front camera service
  • Repairing a weak or poor back cover seal
  • Restoring airtightness through heat pressing

Compatible Devices

  • iPhone 16 Pro Max only. This is a model-specific cut, not a universal strip.
  • iPhone 16 Pro Max back cover / rear glass frame

FAQ

What is the product name?
The product name is 2UUL BA16PM Back Cover Sealing Adhesive for iP16 Pro Max (5pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is BA16PM.
What is this product used for?
This product is used for resealing the back cover of an iPhone 16 Pro Max after back glass replacement or internal repair.
Which devices are compatible with this product?
This product is compatible with the iPhone 16 Pro Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use the BA16PM adhesive on other iPhone models?
No. BA16PM fits the iPhone 16 Pro Max only. 2UUL sells separate BA series variants for other iPhone models, so pick the code that matches the phone on your bench.
Do I need a heat press to install this back cover sealing adhesive?
2UUL’s instructions call for a heating pressure press, such as its DA07 Mini Hot Press Station, to restore the airtight seal. Clean the frame, check it for deformation, apply the adhesive, then heat-press the back cover into place.