2UUL SA17PM Screen Sealing Adhesive for iP17 Pro Max
₨ 900
iPhone 17 Pro Max Screen Sealing Adhesive
The 2UUL SA17PM Screen Sealing Adhesive for iP17 Pro Max (5pcsPack) gives your bench five pre-cut, double-sided seals for the iPhone 17 Pro Max front screen frame. Each sheet arrives cut to the frame outline, so you skip trimming and move straight from cleaning the frame to pressing the display. The 2UUL SA Series is built around heat-press application, and the supplier names the 2UUL DA07 Mini Hot Press Station as a pairing option. Use it after display replacement, battery work, or Face ID module repair to close the front seal and restore the phone’s airtightness. Order by the SA17PM code to match the Pro Max frame.
In stock
iPhone 17 Pro Max Screen Sealing Adhesive for Controlled Display Resealing
The 2UUL SA17PM Screen Sealing Adhesive for iP17 Pro Max (5pcsPack) is a pre-cut, double-sided adhesive for one job: resealing the front screen frame of an iPhone 17 Pro Max after a display repair. Technicians who search for an iPhone 17 Pro Max screen sealing adhesive want a part that matches the frame outline without hand trimming, and this 2UUL SA Series sheet arrives already cut to that shape. Each pack holds five pieces, so one bench finishes five display jobs before it reorders. Treat the adhesive as a consumable, the way you treat a gasket on an engine: every repair uses one, and the quality of that seal decides whether the display sits flush and keeps dust out.
Specification Profile and Pack Format
The model code SA17PM maps to the iPhone 17 Pro Max inside the 2UUL SA Series. Supplier documentation describes a high-strength, double-sided adhesive with a pre-cut profile, shipped as five pieces per pack. The series instructions call for heat-press application and name the 2UUL DA07 Mini Hot Press Station or another heating and pressure press for the final fit. Plan your bench around that detail. The adhesive pairs with a press, so a shop without one needs to budget for it before stocking this item. The supplier does not publish material composition or sheet thickness for this model, so this listing leaves those fields out. Check them on the sheet you receive.
Where It Fits in the Display Replacement Workflow
A display replacement on a modern iPhone follows a fixed sequence: heat the edges, separate the old screen, clean the frame, apply new adhesive, press, and test. This adhesive belongs at the fourth step. Soften the old seal with a hot air station or heating plate, lift the display, and clear every trace of old adhesive from the frame. Then inspect the frame under a microscope. The supplier’s own instructions tell you to clean the frame and check it for deformation before you lay down the tape, and a bent frame defeats even a perfect adhesive sheet.
Hold the phone steady in a PCB holder when the job also involves board-level work, such as a battery connector check or a Face ID flex inspection. Lay the sheet on the frame, seat the display, and run the assembly through your heat press. Test touch response and display output before you hand the phone back. If a display problem shows up after pressing, you reopen the seal and lose that sheet, so finish your testing before the final press when your process allows it.
Buying Notes for Repair Shops and Service Centers
Shops that handle iPhone 17 Pro Max display jobs, battery replacements, or Face ID module work reopen the front seal every time, so they consume this adhesive at the same rate as their repair volume. A five-piece pack suits a single-technician bench. Service centers with several benches stock multiple packs and keep one per expected job.
Match the model code before you order. Supplier series pages list overlapping iPhone 12 to 17 fit ranges, and one SA17PM page also names the iPhone 17, 17 Plus, and 17 Pro. This listing targets the iPhone 17 Pro Max only, so confirm the sheet against the Pro Max frame on your first job. Other models in the range carry their own SA Series codes, such as SA17A for the iPhone 17 Air. Keep unused sheets in the sealed pack until you need them, and buy the matching press consumables from the same Mechanicpk order so your bench never stalls mid-repair.
| Weight | 0.100 kg |
|---|
Key Features
- ✓Pre-cut to the iPhone 17 Pro Max front screen frame outline
- ✓Double-sided adhesive construction for frame-to-display bonding
- ✓High-strength adhesive for a long-lasting hold
- ✓Five pieces per pack for repeated repair jobs
- ✓Designed for heat-press application, with the 2UUL DA07 Mini Hot Press Station named as a pairing option
- ✓Supplier states heat pressing restores the phone’s IP67 airtightness
- ✓Supports repair or replacement of the front screen seal
- ✓Part of the 2UUL SA Series, which covers iPhone 12 to 17 generations with model-specific codes
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL SA17PM Screen Sealing Adhesive |
| Technology Entity | Pre-cut double-sided adhesive, heat-press application |
| Compatible Device Entities | iPhone 17 Pro Max |
| Repair Process Entity | iPhone display replacement and front screen resealing |
| Industry Entity | Mobile phone repair |
Common Repair Uses
- ✓Front screen resealing during iPhone 17 Pro Max repair
- ✓Resealing the frame after screen replacement
- ✓Repairing or replacing the front screen seal
- ✓Resealing after battery replacement
- ✓Resealing after Face ID module repair
- ✓Restoring dust and moisture resistance after a repair
- ✓Keeping the replacement display aligned and firmly attached
Compatible Devices
- ✓iPhone 17 Pro Max (model-specific fit)
- ✓iPhone 17 Pro Max front screen frame
- ✓2UUL DA07 Mini Hot Press Station (supplier-named pairing)
- ✓Other heating and pressure presses
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the 2UUL SA17PM need a hot press to install?
Will the SA17PM fit other iPhone 17 models?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



