JTX BGA315 to BGA110 NAND Conversion Board for iPhone
₨ 299
JTX BGA315 to BGA110 NAND Board
The JTX BGA315 to BGA110 NAND conversion board converts the 315-ball Apple NAND footprint to 110 balls, so you can swap or resize storage on supported iPhone, iPad and Mac logic boards. It covers 64GB, 128GB, 256GB and 512GB NAND capacities and mounts by BGA soldering. A new NAND takes a flash straight away, while a disassembled NAND needs formatting first. Mechanicpk supplies this board to repair shops and service centers across Pakistan that handle iPhone 11 to 13 series NAND work, and it slots into a bench that already runs a hot air station, reballing kit and microscope.
BGA315 to BGA110 NAND Conversion Board: Technical Overview
The JTX BGA315 to BGA110 NAND conversion board converts the 315-ball Apple NAND footprint to a 110-ball footprint, giving you an interface part for storage work on supported iPhone, iPad and Mac boards. Mechanicpk stocks it for technicians who already know why NAND matters on a dead phone and want the right adapter on the bench before the job starts. The board supports 64GB, 128GB, 256GB and 512GB NAND capacities, so a single part covers the storage tiers you meet most often. You fit it with BGA soldering, which keeps the job inside your normal rework routine.
Technical Profile and Device Coverage
This board belongs to the NAND flash and BGA adapter family, so every spec that matters comes down to ball count, capacity and device scope. The footprint changes from 315 balls to 110 balls, and the board supports capacities from 64GB up to 512GB. Device coverage runs across iPhone 11 through 13 Pro Max, iPhone SE2, iPad Air 4, selected iPad Pro generations, iPad Mini 6 and various Mac models, including M1 architecture. Check your exact logic board against the compatibility list before you order, because iPad and Mac coverage applies to selected generations only.
Treat the board as the physical bridge between the NAND and the logic board pads. It changes the ball layout, and your programming tool handles the data side. The design lets you install it directly, with no complicated setup steps between the solder job and the flash. Mechanicpk lists the part under the model name JTX BGA315-110, which makes reordering and matching against supplier sheets straightforward.
Repair Workflow Fit: Soldering and Flashing
Plan the job around two stages, hardware first and software second. On the hardware side, you lift the old NAND with your hot air station, clean the pads under a microscope, secure the board on a PCB holder, and fit the conversion board and new NAND with your reballing kit and soldering station. Run a multimeter check on the pads before you power up, since one bridged ball can cost you the whole job.
On the software side, a new NAND takes a flash straight away. A disassembled NAND needs formatting before you flash it, so build that step into your timing whenever you reuse a chip. This split matches the way most iPhone NAND swaps run in a Pakistani workshop, from IC change karna on a dead phone to a capacity upgrade a customer asked for.
Prep decides how clean the result looks. Remove old solder from the pads, apply fresh flux, check alignment under magnification, and hold your temperature profile steady. Small habits like these protect the board while you work with fine-pitch BGA parts.
Why Shops Stock a BGA315 to BGA110 NAND Conversion Board
Repair shops buy this board because it turns a NAND swap into a repeatable job instead of a one-off gamble. The supported capacity range lets you quote 64GB to 512GB work without hunting for a different part each time. The package includes one conversion board, so you order in the quantity your monthly NAND jobs need and keep a few spares for busy weeks.
You also build a wider storage workflow around it. Pair it with eMMC programmers, UFS adapters and ISP pinout tools for Android storage jobs, and keep test boxes on your bench for software-side checks. As your volume grows, move from basic hand soldering to a full hot air and microscope setup, and you gain more control over fine-pitch BGA work. Service centers and training institutes gain one consistent board and one consistent flashing routine, which makes it easier to teach new technicians a clean NAND workflow. When a customer brings a hardware fault that traces back to NAND, you answer with a clear process and the right part on the shelf.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Converts the 315-ball Apple NAND footprint to 110 balls
- ✓Supports 64GB, 128GB, 256GB and 512GB NAND capacities
- ✓Covers iPhone 11 to 13 Pro Max, iPhone SE2, selected iPads and various Macs
- ✓Installs by BGA soldering
- ✓Direct installation with no complicated operation
- ✓New NAND flashes directly after installation
- ✓Disassembled NAND needs formatting before flashing
- ✓Ships as a single conversion board
Specifications
| Brand | JTX |
|---|---|
| Model | BGA315-110 |
| Category | NAND Conversion Board |
| Compatibility | Apple iPhone, iPad and selected Mac models; NAND capacities 64GB, 128GB, 256GB, 512GB |
| Supported Devices | iPhone 11 to 13 Pro Max, iPhone SE2, iPad Air 4, selected iPad Pro generations, iPad Mini 6, various Mac models including M1 |
| Technology | BGA315 to BGA110 ball conversion, BGA soldering installation |
Common Repair Uses
- ✓NAND replacement and storage upgrade work on supported Apple boards
- ✓NAND replacement on iPhone logic boards with a faulty NAND
- ✓NAND capacity change between supported sizes (64GB, 128GB, 256GB, 512GB)
- ✓Fitting a new NAND and flashing it directly
- ✓Reusing a disassembled NAND after formatting
- ✓NAND work on supported iPad Air 4, iPad Pro and iPad Mini 6 boards
- ✓Storage NAND work on selected Mac models
- ✓Hardware fault tracing on a dead phone that points to NAND
- ✓Bench workflows combining hot air rework, reballing and NAND programming
Compatible Devices
- ✓Apple iPhone, iPad and selected Mac models with 315-ball NAND footprint, 64GB to 512GB capacity
- ✓iPhone 11 series
- ✓iPhone 12 series
- ✓iPhone 13 series up to Pro Max
- ✓iPhone SE2
- ✓iPad Air 4
- ✓iPad Pro (selected generations)
- ✓iPad Mini 6
- ✓Mac models (various, including M1 architecture)



