Kailiwei 043 Phillips 1.5 Screwdriver for Mobile Repair
₨ 900
Phillips 1.5 Precision Screwdriver
The Kailiwei 043 Phillips 1.5 screwdriver gives your bench a dedicated 1.5 mm cross-head driver built for small phone, watch, and tablet screws. The aluminum alloy body keeps the tool light, and the ultra-fine tip of the 043 series seats cleanly in shallow cross-head recesses. You open mid-frames, lift shield plates, and release connector brackets without rounding the screw head. Mechanicpk supplies it as a single driver, so you replace a worn size without buying a full set. Pair it with other 043 tips for mixed-fastener jobs on your repair bench.
Out of stock
Kailiwei 043 Phillips 1.5 Screwdriver for Precision Phone Repair
The Kailiwei 043 Phillips 1.5 screwdriver belongs to Kailiwei’s 043 precision series and fits cross-head screws in the 1.5 mm class. These screws hold shield plates, brackets, and connector covers on many phone boards. A mismatched bit rounds those heads within seconds, and a stripped screw turns a five-minute job into a drilling job. A dedicated driver in the correct size protects every board you open and keeps your disassembly clean.
Where the 1.5 Phillips Tip Fits in Your Repair Workflow
Board-level diagnosis starts with disassembly. When a dead phone, charging issue, display problem, or hang on logo fault lands on your bench, you remove the back cover, mid-frame screws, and metal shield plates before you touch a probe. The 1.5 Phillips tip handles the cross-head fasteners at this stage. Once the board sits exposed, you move on to measurements with a multimeter, then to rework with a hot air station or soldering station under a microscope. Good screw handling at the start keeps the later stages simple, because you never fight a damaged screw while a shield blocks access to the IC you need.
Build and Handling of the 043 Series
Kailiwei builds this driver from aluminum alloy, which keeps the weight low during long sessions. The 043 series pairs ultra-fine tips with a non-slip grip, so you control rotation and pressure with your fingertips rather than your whole wrist. That control matters on small fasteners, where too much downward force chews the recess and too little lets the tip cam out. Keep the tip clean and press it fully into the recess before you turn. A seated tip transfers torque evenly and protects both the screw and the driver.
Why Technicians Pick a Single 1.5 Phillips Driver
A single driver lets you build your bench size by size. You replace the Phillips 1.5 when the tip wears, and you leave the rest of your tools untouched. Mixed-fastener jobs call for more than one profile, so pair this driver with other Kailiwei 043 tips, such as the Torx 0.8 or the Phillips 2.2, depending on the screws on your board. Shops that run several technicians often buy one driver per bench, which removes the wait for a shared tool and speeds up every opening.
Buying for Your Shop or Service Center
The Phillips 1.5 size covers a large share of small internal screws in phones, watches, and tablets, so it earns a permanent spot in a repair kit. Mechanicpk supplies the Kailiwei 043 Phillips 1.5 for repair shop owners, service centers, and training institutes across Pakistan. Add a PCB holder, a set of reballing tools, and a few ISP pinout tools to the same order, and you cover the path from opening the device to board repair.
| Weight | 0.3 kg |
|---|
Key Features
- ✓1.5 mm Phillips cross-head tip
- ✓Aluminum alloy body
- ✓Ultra-fine tip from the Kailiwei 043 series
- ✓Non-slip grip for fingertip control
- ✓Light enough for long repair sessions
- ✓Single driver for easy size replacement
- ✓Suited to phone, watch, and tablet screws
- ✓Pairs with other Kailiwei 043 tips
Specifications
| Brand | Kailiwei |
|---|---|
| Model | 043 Phillips 1.5 |
| Category | Screwdrivers (Mobile Repair Tools) |
| Compatibility | Cross-head screws in the 1.5 mm Phillips class |
| Material | Aluminum alloy |
Common Repair Uses
- ✓Opening devices and releasing internal screws before board-level or part-level repair.
- ✓Back cover and mid-frame removal
- ✓Shield plate removal before IC work
- ✓Battery connector cover release
- ✓Charging port board removal
- ✓Display flex bracket release
- ✓Camera module bracket removal
- ✓Daughterboard separation
- ✓Reassembly after board repair
Compatible Devices
- ✓Universal by screw type. The driver fits any phone, watch, tablet, or small electronic device that uses 1.5 mm Phillips screws. It does not target specific models.
- ✓Smartphones with 1.5 mm Phillips shield screws
- ✓Smartphones with 1.5 mm Phillips bracket screws
- ✓Smartphones with 1.5 mm Phillips mid-frame screws
- ✓Smartwatches with small cross-head case screws
- ✓Tablets with small internal cross-head screws
- ✓Small electronics with 1.5 mm Phillips fasteners
- ✓Battery connector covers with Phillips screws
- ✓Daughterboard and flex bracket screws



