Kailiwei 043 Phillips 2.2 Precision Screwdriver
₨ 900
Kailiwei 043 Phillips Precision Driver
The Kailiwei 043 Phillips 2.2 screwdriver is a single-tip precision driver for phone, watch and tablet disassembly. It belongs to the Kailiwei 043 range, which splits its tip profiles across individual drivers (Phillips 1.5, Phillips 2.2, Torx 0.8, Hex T2 and Y-type 0.6). The aluminum alloy body stays light in your hand during long teardown sessions. The high-hardness precision tip seats in small cross-head recesses, so you open housings, lift shield screws and release battery connector covers without rounding the heads. Mechanicpk supplies it to technicians, repair shops and service centers across Pakistan who match one driver to each screw type.
In stock
Kailiwei 043 Phillips 2.2 Screwdriver for Precision Mobile Repair
The Kailiwei 043 Phillips 2.2 screwdriver gives you a dedicated cross-head driver from the Kailiwei 043 precision range. That range also includes Phillips 1.5, Torx 0.8, Hex T2 and Y-type 0.6 variants. Each model carries one tip profile, so you match the driver to the screw instead of searching a loose bit tray. The aluminum alloy body keeps the tool light, and the high-hardness precision tip targets the miniature Phillips screws that hold phone, watch and tablet assemblies together. Mechanicpk stocks it for technicians who want a focused, spec-led driver for daily disassembly work.
Fixed Phillips Tip Built for Small Screws
Phone makers fasten shields, brackets, battery connectors and housing panels with miniature cross-head screws, and a mismatched driver rounds those recesses fast. The 2.2 Phillips tip on this model seats directly in the cross recess, so your turning force lands where the screw needs it. Because the tip belongs to the driver, you skip the bit holder and the bit change between screws. That keeps your hand position consistent across a full teardown. The grip follows the non-slip design Kailiwei applies across the 043 series, which gives you control when a screw sits tight against the frame. You rotate the body between thumb and forefinger, apply light downward pressure and back the screw out without chewing the head. A clean screw head matters on a repeat repair, because you refit the same screw when the job closes.
Where It Fits in Your Repair Workflow
Every board-level job starts with opening the device. A dead phone, a charging issue, a display problem or a hang on logo fault all begin with removing back panels and mainboard shield screws before you touch a soldering station or hot air station. This driver covers that first stage. Once the board sits exposed, you move to the next tools in the chain: a microscope to inspect the board, a multimeter to trace the fault, a PCB holder to secure the board, and soldering or reballing equipment for IC change karna work. Keep the Phillips 2.2 within reach of your bench so screw removal never slows the diagnostic and rework stages that follow. If you handle hardware fault jobs all day, you value a driver that stays on the bench and does one task well. The Kailiwei 043 Phillips 2.2 screwdriver fits that role.
Choosing the Right 043 Variant
Check the screw before you pick the driver. Cross recesses take the Phillips 2.2 or the Phillips 1.5, depending on screw size. Torx recesses take the 0.8, hex recesses take the T2 and Y-shaped recesses take the 0.6. A repair shop that works on mixed devices can build a full driver rack variant by variant and keep every common screw type covered. If you prefer one package with several tips, the Kailiwei 041 precision set offers multiple micro tips and magnetic shafts, and it works as the step up from a single driver. Service centers that process high intake volumes often order several 043 variants together, so each technician keeps a personal driver for each screw type and never waits for a shared tool.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Single-tip Phillips 2.2 driver from the Kailiwei 043 range
- ✓High-hardness precision tip for small cross-head recesses
- ✓Aluminum alloy body for a light feel in extended use
- ✓Non-slip grip design for controlled turning
- ✓Dedicated tip profile, so no bit swapping between screws
- ✓Sits alongside Phillips 1.5, Torx 0.8, Hex T2 and Y-type 0.6 variants
- ✓Suits phone, watch and tablet disassembly
- ✓Fits bench work ahead of microscope inspection and soldering
Specifications
| Brand | Kailiwei |
|---|---|
| Model | 043 Phillips 2.2 |
| Category | Precision Screwdrivers |
| Compatibility | Phillips (cross-head) screws, 2.2 tip size |
| Supported Devices | Smartphones, watches, tablets |
| Material | Aluminum alloy |
Common Repair Uses
- ✓Disassembly and reassembly of devices that use small Phillips screws
- ✓Opening phone housings and back panels
- ✓Removing mainboard shield screws
- ✓Releasing battery connector cover screws
- ✓Removing internal bracket screws
- ✓Dismantling tablets for board access
- ✓Opening watch cases that use cross-head screws
Compatible Devices
- ✓Universal for small Phillips screws — not limited to specific phone models
- ✓Smartphones with miniature Phillips screws
- ✓Watches with small cross-head case or movement screws
- ✓Tablets with Phillips-fastened housings and brackets
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What does the 2.2 mean on the Kailiwei 043 Phillips 2.2 screwdriver?
Which Kailiwei 043 screwdriver do I need for Torx, hex or Y-type screws?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



