Kailiwei 043 Y0.6 Tri-Point Screwdriver for iPhone Repair

₨ 900

Kailiwei 043 Y0.6 Precision Driver

The Kailiwei 043 is a Y-type 0.6 mm precision screwdriver built for the tri-point screws inside Apple iPhones. This Y0.6 tri-point screwdriver fits the bracket screws that hold the display cable, battery connector and home button assembly on iPhone 7 through XS Max. A matched tip seats fully in the three-wing screw head, so you open the phone without rounding the screw. Pair it with a microscope and a PCB holder, and your display problem, charging issue and battery jobs start cleanly. Mechanicpk supplies the Kailiwei 043 to technicians, repair shops and service centers across Pakistan who handle Apple hardware every day.

In stock

19 People watching this product now!
Description

Y0.6 Tri-Point Screwdriver Built for Apple Bracket Screws

The Kailiwei 043 is a Y-type 0.6 mm screwdriver, and this Y0.6 tri-point screwdriver serves one purpose: removing and refitting the tiny three-point screws Apple uses under the iPhone display, battery and home button brackets. When you open an iPhone 7 through XS Max for a display problem, a charging issue or a battery swap, a Phillips bit rounds these screws within seconds. A matched Y tip prevents that damage and keeps your repair bench moving. Mechanicpk stocks the Kailiwei 043 for Pakistani technicians who handle Apple hardware daily and want a dedicated driver instead of a generic bit.

Tip Geometry and Screw Fit

The 043 carries a Y-type tip sized at 0.6 mm, which the trade also labels Y000 or Y0.6. Its three wings engage the three slots in the screw head and spread torque across all contact points instead of loading a single edge. That matters on screws this small, because a mismatched tip chews the head and leaves you digging out a stripped screw under the microscope. Seat the wings fully, press straight down and turn slowly. Check the screw against the tip before you apply force, since Apple devices use several different screw drives and each one needs its own driver.

Where It Fits in Your Repair Workflow

On iPhone 7 through XS Max, tri-point screws secure the metal brackets that cover the display connector and the battery connector. You remove those brackets first on almost every job: display replacement, battery replacement, charging port work and board-level inspection. Disconnect the battery connector before anything else, then lift the display bracket and continue. This driver sits at the very start of that sequence, so a clean screw removal here protects every step that follows.

After the phone is open, the rest of your bench takes over. A microscope lets you inspect connector pins and solder joints, and a PCB holder keeps the board steady. A multimeter or test box helps you trace a hardware fault or a dead phone, and a hot air station or soldering station handles board-level rework when the fault sits on the logic board. Reballing kits come into play for deeper IC jobs. The Kailiwei 043 does not replace any of those tools; it opens the door to them.

Why Technicians Stock a Dedicated Y0.6 Driver

Repair shops that open iPhones every day lose time and screws to improvised bits. A dedicated Y0.6 driver stays at your bench, always matched to the same screw, so you stop swapping tips mid-repair. Keep it separate from your Phillips, pentalobe and other precision drivers, and you reach for the right one without checking. Shops building a full Apple repair kit usually start with this driver, then add the other screw drives and an opening toolset around it. Order the Kailiwei 043 from Mechanicpk if your daily workload includes iPhone display, battery or charging port repair.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Y-type tip sized at 0.6 mm (Y0.6 / Y000)
  • Three-wing tri-point profile that matches Apple bracket screws
  • Dedicated driver for iPhone 7 through XS Max screw type
  • Precision screwdriver format for micro-screw work
  • Kailiwei brand, model 043
  • Suits technician benches, repair shops and service centers

Specifications

BrandKailiwei
Model043
CategoryPrecision Screwdriver
Compatibility0.6 mm Y-type (tri-point) screws
Supported DevicesiPhone 7 through XS Max (by screw type)
TechnologyY-type tri-point drive, 0.6 mm tip

Common Repair Uses

  • Removing and refitting 0.6 mm tri-point screws during iPhone repair
  • Removing the display cable bracket screws
  • Removing the battery connector bracket screws
  • Removing the home button bracket screws on iPhone 7 and 8 models
  • Display replacement for a display problem
  • Battery replacement
  • Charging issue repair that needs board access
  • Opening the phone before board-level hardware fault diagnosis
  • Refitting brackets after repair without stripping screws

Compatible Devices

  • Verified by screw type — Apple iPhone models that use 0.6 mm Y (tri-point) bracket screws
  • iPhone 7
  • iPhone 7 Plus
  • iPhone 8
  • iPhone 8 Plus
  • iPhone X
  • iPhone XR
  • iPhone XS
  • iPhone XS Max

FAQ

What is the product name?
The product name is Kailiwei 043 Y-Type 0.6 Screwdriver.
What is the brand of this product?
The brand of this product is Kailiwei.
What is the model of this product?
The model of this product is 043.
What is this product used for?
This product is used for removing and refitting 0.6 mm Y-type tri-point screws during iPhone repair.
Which devices are compatible with this product?
This product fits devices that use 0.6 mm Y-type tri-point screws, including iPhone 7, 7 Plus, 8, 8 Plus, X, XR, XS and XS Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which iPhone screws does a Y0.6 tri-point screwdriver fit?
It fits the 0.6 mm tri-point screws on the display cable bracket, battery connector bracket and home button bracket of iPhone 7 through XS Max.
Is a Y0.6 screwdriver the same as Y000?
Yes. Y0.6 and Y000 both name the 0.6 mm Y-type tri-point tip size, and the trade uses the two labels interchangeably.