Mechanic 2nd Magic Tag Solder Piece for Pad Repair

₨ 650

Mechanic Magic Tag Pad Repair

The Mechanic Magic Tag solder piece (2nd generation) replaces the flying jumper wire when a solder pad lifts or goes missing on a mobile motherboard. Mechanic builds each pad from industrial-grade PCB copper foil at 30μm and adds fixed pins that anchor it to the board. You solder it onto the damaged spot, check continuity, and fix it with UV-curing solder mask ink. The thin, flat profile lets double-layer boards sit back together without a wire in the way. It suits iPhone and Android board work, BGA pad repair, and mobile phone pad repair at your repair bench.

In stock

20 People watching this product now!
Description

Mechanic Magic Tag Solder Piece: Pad-Level Repair Without Flying Wire

The Mechanic Magic Tag solder piece, in its 2nd generation form, gives your repair bench a pad-level fix for a fault that normally costs time and patience: a lifted or missing solder pad. Instead of looping a hair-thin jumper wire from the broken point to the next good trace, you solder a pre-formed copper pad onto the damaged spot and move on. Mechanic builds the pad from industrial-grade printed circuit board copper foil at 30μm thickness and adds a fixed pin that anchors it to the board. Pakistani repair shops handle dead phone cases and hardware fault boards every day, and this switch from flying wire to a flat, board-level pad speeds up how fast you close a job.

Pad Construction and Technical Highlights

Each Magic Tag pad targets the main weakness of traditional jumper work: bulk. A looped wire sits above the board, catches on shields, and stops the next layer from seating flat. The 30μm copper foil pad stays thin enough to avoid that problem. The reinforced fixed pins help the pad resist lifting after you solder it down, and the flat surface helps you avoid false soldering caused by uneven contact. You then fix the pad with UV-curing solder mask ink, the green oil your workshop already uses, so the repaired spot blends back into the original board finish. Supplier documentation lists round, rectangular, and oval pad shapes, which lets you match the pad to the damaged footprint instead of forcing one shape onto every repair.

Where the Mechanic Magic Tag Solder Piece Fits Your Rework Workflow

Start with a clean board. Remove residue and damaged material from the pad area, then place the Magic Tag under your microscope. Heat it with your soldering station or hot air station, flow solder across the joint, and test continuity with a multimeter before you cure the mask. Your PCB holder keeps the board steady during placement, which matters on small pads. The piece works well for BGA pad repair under ICs, CPUs, and NAND chips, and for restoring pads on broken flex connectors or battery terminals. If a pad lifts during reballing, you fix it with the Magic Tag first and then continue with your reballing kit. On double-layer boards, the flat pad lets you recombine the layers directly, with no wire between them. Boards that show a charging issue, display problem, or network issue can trace back to a damaged pad or trace, and this piece gives you a clean way to restore that connection.

Why Technicians Stock It for Mobile Repair in Pakistan

You use this piece in place of jumper lagana on pad faults, so it behaves like a consumable you restock as your repair volume grows. Supplier documentation covers iPhone and Android motherboard repair, and the same pad-level approach applies to other small electronics boards such as tablets and laptops. The pack contains one Magic Tag. Technicians who already work with fine jumper wire and flux can treat this as the upgrade path: the same micro-soldering skill, with a neater and more repeatable result. Pair it with your soldering stations, hot air stations, microscopes, and reballing kits from the Mechanicpk range to cover the full pad-repair workflow.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 2nd generation enhanced version of the Mechanic Magic Tag
  • Industrial-grade PCB copper foil pad at 30μm thickness
  • Fixed pins reinforce the pad against lifting
  • Thin, flat profile reduces the risk of false soldering
  • Fixes with UV-curing solder mask ink (green oil)
  • Replaces jumper wire looping on damaged pads
  • Lets double-layer boards recombine without a wire between layers
  • Round, rectangular, and oval pad shapes per supplier documentation

Specifications

BrandMechanic
ModelMagic Tag (2nd Generation Enhanced Version)
CategoryMobile Repair Tools > Jumper and Rework Pads
CompatibilityMobile phone motherboards (iPhone and Android); also suited to other small electronics PCBs such as tablets and laptops
TechnologyFixed-pin repair pad with UV-curing solder mask (green oil) fixing
MaterialIndustrial-grade printed circuit board copper foil, 30μm thickness

Common Repair Uses

  • Pad-level repair where a solder pad has lifted, burned, or gone missing
  • Replacing flying jumper wire on damaged pads
  • BGA pad repair under ICs, CPUs, and NAND chips
  • Restoring missing or damaged solder pads
  • Repairing broken pads on flex connectors
  • Restoring battery terminal pads on a PCB
  • Recombining double-layer motherboards after repair
  • PCB trace and pad repair during micro-soldering

Compatible Devices

  • iPhone and Android mobile motherboards (general pad-repair scope, not model-specific)
  • iPhone motherboards
  • Android smartphone motherboards
  • Double-layer (sandwich) mobile motherboards
  • Tablet PCBs
  • Laptop motherboards

FAQ

What is the product name?
The product name is Mechanic 2nd Magic Tag Solder Piece.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is Magic Tag, 2nd Generation Enhanced Version.
What is this product used for?
This product repairs lifted, burned, or missing solder pads on mobile motherboards and replaces the traditional flying jumper wire.
Which devices are compatible with this product?
This product suits iPhone and Android mobile motherboards, and supplier documentation also lists tablets and laptops. It is a general pad-repair tool and does not target specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the Magic Tag replace jumper wire on double-layer iPhone boards?
Yes. The thin, flat pad replaces the looped jumper wire, so you can recombine the double-layer motherboard after repair without a wire between the layers.
How do you fix the Magic Tag after soldering it?
You solder the pad onto the damaged spot, then fix it with UV-curing solder mask ink (green oil). This restores the original look of the pad area.