MECHANIC PE50 50ml Needle Tip Dispenser Bottle
₨ 100
50ml Needle Tip Dispenser Bottle for Precise Liquid Application
The MECHANIC PE50 is a 50ml dispenser bottle with a needle-type tip for controlled liquid placement at the repair bench. You get a compact plastic body that fits easily in a toolbox or beside your cleaning station. The narrow tip lets you place isopropyl alcohol or acetone exactly where you need it, which reduces spills and wasted liquid. It suits board cleaning, residue removal and small-volume liquid work. Refill it from a larger container and dedicate each bottle to one liquid to avoid cross-contamination on sensitive boards.
In stock
MECHANIC PE50 50ml Needle Tip Dispenser Bottle: Controlled Liquid Application for Repair Work
Open pouring cleaning liquid onto a board wastes material and floods nearby components. The MECHANIC PE50 is a 50ml needle tip dispenser bottle designed for technicians who need a narrow, predictable stream. Whether you clean an area before rework or dose a small amount of solvent into a tight space, the needle tip keeps the flow focused. The plastic body stays light and practical for daily use. Many repair shops keep one bottle per liquid so each container stays clean and clearly labeled. This guide explains where the PE50 fits in your workflow, how its capacity and tip suit common tasks, and how to keep it working reliably at your bench.
Where the PE50 Fits in Your Repair Workflow
Cleaning comes early in most board-level repairs. Before you inspect a component under the microscope, you remove dust, old flux and oily residue from the work area. The PE50 handles that step well because you deliver isopropyl alcohol or acetone directly onto the target spot. You avoid soaking connectors, capacitors and nearby traces with liquid you did not need. After a jumper change or an IC replacement, the same bottle helps you clean the area again before testing. Your bench stays organized because one small container covers a repeated task. Keep the sequence simple: clean, inspect, repair, then clean again before power-up. The PE50 supports each stage without replacing your main cleaning station or ultrasonic cleaner.
Capacity and Needle Tip Design
The 50ml capacity sits in a practical middle range. It holds enough liquid for a full cleaning session without constant refilling, yet it stays small enough to handle with control. The needle-type tip concentrates the flow into a narrow stream, so you place liquid precisely on contacts, pads and tight gaps. Your hand pressure on the bottle sets how much liquid you release, which lets you move from a light wipe-down to a targeted dose within seconds. A narrow tip also limits spread, so less liquid reaches surrounding parts. Keep the tip clean, because dried residue can slow the flow or change the direction of the stream. Wipe the tip after each use and close the cap firmly to limit evaporation between sessions.
Material, Handling and Refilling
The bottle uses a plastic body, which keeps weight low and handling simple. Check chemical compatibility before you store aggressive solvents, and test a small amount on scrap material first. Refill from a larger container through a funnel to avoid spills and contamination. Label each bottle with the liquid name and the date you filled it. Keep separate bottles for alcohol, acetone and any water-based solution, so you never mix cleaning agents by accident at the bench. Store the bottle upright, away from heat and direct sunlight, to preserve both the liquid and the plastic over time. Replace the bottle when the body shows cracking or the tip no longer delivers a clean stream.
| Weight | 0.9 kg |
|---|
Key Features
- ✓50 ml capacity for extended cleaning sessions
- ✓Needle-type tip for precise, controlled liquid placement
- ✓Plastic body for light, practical handling
- ✓Compact size that fits beside the repair bench
- ✓Narrow stream that limits spread onto surrounding parts
- ✓Suitable for isopropyl alcohol and acetone use
- ✓Easy refill workflow from larger containers
- ✓Simple one-liquid-per-bottle organization for clean repair work
Specifications
| Brand | MECHANIC |
|---|---|
| Model | PE50 |
| Category | Liquid Dispenser Bottle, 50 ml |
| Compatibility | Universal, not device-specific |
| Technology | Needle-type dispensing tip |
| Material | Plastic |
Common Repair Uses
- ✓Verified real-world scenarios where a needle-tip dispenser bottle supports board preparation and cleaning.
- ✓Cleaning the work area before microscope inspection
- ✓Removing old flux and oily residue before rework
- ✓Cleaning after a jumper or IC replacement, before testing
- ✓Targeted solvent application around connectors and capacitors
- ✓Wiping contacts and pads before soldering
- ✓Dispensing small quantities of cleaning liquid into tight gaps
- ✓Storing and dosing isopropyl alcohol for daily bench use
- ✓Re-cleaning the board before power-up
Compatible Devices
- ✓Universal, not device-specific. Scope covers liquid dispensing tasks rather than a particular phone model or chipset.
- ✓Universal liquid dispensing across mobile phone repair benches
- ✓Universal use on mainboards and PCB cleaning workflows
- ✓Isopropyl alcohol (IPA) dispensing for board cleaning
- ✓Acetone dispensing for residue removal in small areas
- ✓Small-volume solvent handling for pre-rework cleaning
- ✓Controlled liquid placement in tight component areas
- ✓Refill-based storage for one-liquid-per-bottle workflows
- ✓General electronics repair bench liquid handling
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the PE50 hold isopropyl alcohol and acetone?
How do I stop a needle tip from clogging on a PE50?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



