Mechanic V8B45 138 Soldering Paste 60 gm Sn42Bi58

₨ 1,200

Low Temperature Solder Paste for BGA Rework
Mechanic V8B45 138 Soldering Paste 60 gm is a lead-free Sn42Bi58 solder paste that melts at 138°C, so you reflow BGA chips and SMD parts without pushing nearby components toward SAC305 temperatures. The 60 gm net pack gives your repair bench a generous supply for reballing, CPU reattachment, and motherboard rework. Technicians in Pakistan reach for it with hot air stations, stencils, and preheaters when a dead phone, charging issue, or hang on logo fault traces back to a weak IC joint. You get predictable single-point melting and a lead-free alloy built for precision board work.

In stock

13 People watching this product now!
Description

Low Temperature Solder Paste for Mobile Repair at 138°C

Mechanic V8B45 138 Soldering Paste 60 gm is a low temperature solder paste for mobile repair, built on a lead-free Sn42Bi58 alloy that melts at 138°C. Mechanic sells its V-series in several pack sizes, and this V8B45 version comes as a 60 gm net pack, so a busy repair shop gets a deep supply for BGA, SMD, and SMT rework. If your bench handles boards where heat damage to neighbouring parts is a real risk, this paste lets you work well below the 217°C range that standard lead-free SAC305 solder demands.

Sn42Bi58 Alloy: What the 138°C Melting Point Gives You

Tin at 42 percent and bismuth at 58 percent form a eutectic alloy, so the paste moves from solid to liquid at one temperature instead of passing through a slushy range. That single melt point makes reflow predictable: you watch the paste flash, the BGA settles, and you pull the heat. Typical Sn-Bi reflow peaks sit around 165 to 180°C, roughly 70 to 80°C cooler than a SAC305 profile.

On a phone logic board, that gap matters. Flex connectors, plastic shields, nearby capacitors, and underfilled chips all tolerate less heat exposure when you stay low, which cuts the risk of turning one hardware fault into three. Bismuth falls outside RoHS restrictions, so you also keep a lead-free consumable on your bench.

Mechanic positions the V-series for SMD and BGA soldering. Check your preheater and hot air settings against the 138°C melt point and the specific chip, because every board and IC package heats differently.

Where It Fits in the Reballing and Rework Workflow

A typical job starts with a dead phone or a charging issue that traces to a lifted BGA joint. You lift the IC with a hot air station, clean the pads with flux and wick on a soldering station, and then reattach. This paste handles the reattach step: you apply it through a stencil or onto the pads, set the chip, and reflow.

Reballing kits and PCB holders keep the board steady, and a microscope lets you confirm clean, bridge-free joints before you power up. A multimeter in continuity or diode mode then verifies the joint instead of leaving you to guess. Low-temperature Sn-Bi paste also suits CPU reattachment on iPhone logic boards, because it avoids reaching 217°C.

Treat this paste as the entry point of the hardware workflow. Start with SMD parts, then move to ISP pinout tools, eMMC programmers, and UFS adapters when the fault sits in storage or boot instead of a solder joint. Test boxes help you separate software flashing cases from true hardware faults, so you pick the right tool for the dead phone on your bench.

Handling, Storage, and Alloy Compatibility Notes

Keep the jar sealed, store it cool and dry, and keep it out of direct sunlight. Those precautions match the guidance listed for the Mechanic V-series. Let the paste reach room temperature before you open the jar, and wear gloves and ventilate your bench, as you would with any flux-bearing paste.

Never mix Sn-Bi paste with leaded solder on the same joint. The mix produces a joint that remelts at an unexpectedly low temperature. Clean old solder from the pads before you apply this paste.

Bismuth joints suit repair jobs where you reflow once or twice. They handle heavy mechanical stress less well than SAC305, so keep this paste for boards and parts where low heat matters more than maximum joint strength.

Additional information
Weight0.60 kg
Q & A
Please login to post questions

Key Features

  • Lead-free Sn42Bi58 alloy (42% tin, 58% bismuth)
  • 138°C eutectic melting point for single-temperature reflow
  • Lower reflow heat than SAC305, protecting nearby components
  • Designed for SMD, BGA, and SMT soldering
  • Suits stencil work and hot air rework
  • 60 gm net pack for repeated reballing and rework jobs
  • Part of Mechanic’s V-series low-temperature paste range
  • Works alongside reballing kits, hot air stations, and microscopes

Specifications

Brand EntityMechanic
Product EntityMechanic V8B45 138 Soldering Paste 60 gm
Technology EntitySn42Bi58 lead-free low-temperature solder alloy, 138°C eutectic melting point
Compatible Device EntitiesSmartphone motherboards, iPhone logic boards, laptop motherboards, SMD and BGA components
Repair Process EntityBGA reballing, CPU reattachment, SMD rework, PCB repair
Industry EntityMobile phone repair industry, PCB rework, SMT soldering

Common Repair Uses

  • Reattaching and reballing BGA and SMD parts where low reflow heat protects the board.
  • BGA reballing with a stencil
  • CPU and IC reattachment on logic boards
  • SMD component replacement
  • Motherboard rework after IC removal
  • PCB repair on boards with heat-sensitive parts
  • Fixing weak IC joints behind dead phone, charging issue, and hang on logo faults
  • Small-batch SMT soldering
  • Reballing and soldering practice in training institutes

Compatible Devices

  • Universal solder paste, not device-specific. It works on any board that accepts low-temperature Sn-Bi solder.
  • Smartphone motherboards (universal, not limited to one brand)
  • iPhone logic boards (CPU reattachment)
  • Laptop motherboards
  • BGA ICs on mobile PCBs
  • SMD components and pads
  • SMT boards used with stencil application
  • PCBs with heat-sensitive neighbouring parts
  • Training boards for reballing practice

FAQ

What is the product name?
The product name is Mechanic V8B45 138 Soldering Paste 60 gm.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is V8B45.
What is this product used for?
This product is used for soldering SMD and BGA components at a low temperature during mobile phone and PCB repair.
Which devices are compatible with this product?
This paste is universal and not device-specific. It suits phone motherboards, iPhone logic boards, laptop motherboards, and other SMD and BGA boards.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the melting point and alloy of Mechanic V8B45 solder paste?
The paste uses a lead-free Sn42Bi58 alloy (42% tin, 58% bismuth) with a melting point of 138°C.
Can I mix Mechanic V8B45 Sn42Bi58 paste with leaded solder?
No. Mixing Sn-Bi paste with leaded solder creates joints that remelt at unexpectedly low temperatures, so clean old solder from the pads before you apply this paste.