Mijing K23 Pro Multi-function PCB Fixture
Mijing K23 Pro Multi-Function PCB Fixture Original price was: ₨ 5,000.Current price is: ₨ 4,500.
Back to products

Mijing 199°C Solder Paste 50g for BGA & Mobile PCB Repair

₨ 800

Mijing 199°C Tin Paste for Board Repair

This 199 degree solder paste from Mijing comes in a 50g wide-mouth bottle for mobile phone motherboard, circuit board, and BGA chip repair. The lead-free, silver-free formulation melts at 199°C, so it fits jobs where you want a higher-melting joint than the 138°C or 158°C grades in the same Mijing range. You scoop the paste onto cleaned pads, heat it with your hot air station, and aim for stable, bright joints with less false soldering. Keep it on your bench for BGA reballing support, pad repair, and hardware fault jobs on a dead phone.

In stock

18 People watching this product now!
Description

199 Degree Solder Paste for Mobile Motherboard and BGA Work

A 199 degree solder paste sits at the high end of the Mijing tin paste range, which also includes 138°C, 158°C, and 183°C grades. Mechanicpk supplies the 199°C grade in a 50g wide-mouth bottle for technicians who rework BGA chips and mobile phone motherboards and want a lead-free, silver-free paste with a higher melting point. You pick the grade by the job. The 199°C paste suits repairs where you want the paste to flow only when your hot air station reaches a deliberate, higher working temperature.

Melting Point and Paste Behavior

The 199°C rating defines this product. Low-temperature pastes around 138°C flow early, which helps on heat-sensitive work but can loosen joints you already finished. A 199°C paste asks for more heat at the board, so you set your hot air station deliberately, preheat the board evenly, and watch the paste wet the pads before you remove the heat. Mijing positions this high-purity tin paste for stable welding and for reducing false soldering, which matters when a half-wetted ball sends a repaired phone straight back to your counter. The lead-free and silver-free formulation keeps the paste simple for shops that want to stay away from leaded consumables. The wide-mouth bottle lets you scoop the paste directly and load pads without a syringe plunger.

Repair Workflow Fit

This paste belongs in the pad-and-chip stage of board repair. After you lift a BGA IC with your hot air station, you clean the pads, check them under a microscope, and decide how to rebuild the joint. You load paste on the pads or work it through a stencil from your reballing kit, seat the chip, and reflow. PCB holders keep the motherboard steady during that step, and a soldering station handles the surrounding touch-ups. Once the joint cools, you confirm continuity with a multimeter before you power the board.

You can use the same routine across many hardware fault jobs: IC change karna on a charging issue board, power-stage rework on a dead phone, or display problem repairs that need a clean BGA joint. After you reball an eMMC or UFS chip, you move on to your ISP pinout tool, eMMC programmer, or UFS adapter to read and test the memory, so a dependable joint saves you a second teardown. Wide technical range comes from Mijing’s 138°C to 199°C line, which lets you keep one grade for each temperature requirement on your bench.

Handling and Bench Practice

Apply small amounts and spread them evenly, because excess paste raises the risk of bridging between fine-pitch pads. Work in a ventilated area, keep the paste away from your eyes, and close the lid fully after each use so the paste stays workable. Clean flux residue from the board with your usual process once the board cools. Match your hot air station temperature and airflow to the board and component size, and test on a scrap board first if you change grades, since a 199°C paste needs different heat settings than a 138°C one.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • 199°C melting point for higher-temperature paste jobs
  • 50g net content per bottle
  • Lead-free formulation
  • Silver-free formulation
  • Wide-mouth bottle for easy scooping
  • Stable welding that reduces false soldering
  • Suits mobile phone motherboard, circuit board, and BGA chip repair
  • Part of Mijing’s 138°C, 158°C, 183°C, and 199°C paste range

Specifications

BrandMijing
Model199°C High Purity Tin Paste
CategorySolder Paste
CompatibilityMobile phone motherboards, electronic circuit boards, BGA chips
TechnologyLead-free, silver-free solder paste, 199°C melting point
MaterialHigh purity tin paste
Weight50g

Common Repair Uses

  • BGA chip soldering and mobile motherboard repair workflows
  • BGA chip soldering after IC removal
  • Mobile phone motherboard repair
  • Electronic circuit board soldering repair
  • Pad rebuilding before chip placement
  • Reballing support with a stencil
  • Hardware fault board rework
  • Dead phone board repair
  • Pairing with hot air station reflow

Compatible Devices

  • Universal — not device-specific; suits mobile phone motherboards, electronic circuit boards, and BGA chip soldering
  • Mobile phone motherboards
  • Electronic circuit boards
  • BGA chips
  • BGA pad rebuilds on mobile PCBs
  • Boards that need a higher-temperature paste grade
  • Hot air station rework setups
  • Reballing kit workflows
  • General electronic motherboard soldering and repair

FAQ

What is the product name?
The product name is Mijing 199°C Solder Paste 50g.
What is the brand of this product?
The brand of this product is Mijing.
What is the model of this product?
The model of this product is the Mijing 199°C High Purity Tin Paste.
What is this product used for?
This product is used for soldering and repairing mobile phone motherboards, electronic circuit boards, and BGA chips.
Which devices are compatible with this product?
This product is universal and not device-specific. It suits mobile phone motherboards, electronic circuit boards, and BGA chips.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the melting point of Mijing 199°C solder paste, and is it lead-free?
The melting point is 199°C. The paste is lead-free and silver-free.
Can I use this solder paste for BGA chip work on mobile motherboards?
Yes. Mijing lists this paste for mobile phone motherboard, circuit board, and BGA chip soldering and repair.