Mijing MS1 Universal Module for iPhone 16 Series
₨ 2,800
iPhone 16 Heating Module for MS1
The Mijing MS1 module for iPhone 16 is an interchangeable heating plate for the Mijing iRepair MS1 universal desoldering platform. You fit it to the MS1 base and gain dedicated support for the iPhone 16, 16 Plus, 16 Pro, 16 Pro Max and 16e. The module handles precise motherboard layering and separation, so your board-level work starts from a controlled, evenly prepared surface. If your bench already runs the MS1 platform, this plate adds the iPhone 16 generation without a second platform. Each unit ships as a single module.
In stock
Mijing MS1 Module for iPhone 16 Series Board Rework
The Mijing MS1 module for iPhone 16 is a heating plate for technicians who already run the Mijing iRepair MS1 platform and now see iPhone 16 boards on their bench. It does not work as a standalone preheater. It clips into the MS1 system and gives the platform dedicated support for the full iPhone 16 family: iPhone 16, 16 Plus, 16 Pro, 16 Pro Max and 16e. Mechanicpk supplies it for shops that want the iPhone 16 generation covered without replacing the base unit.
Where the Module Sits in Your Rework Workflow
Board-level iPhone repair starts with controlled heat. Before you lift a layered motherboard, remove a shielded component or run a hot air station over a stubborn area, the board has to reach a stable working temperature. This module provides the heating surface for that preheating stage on iPhone 16 series boards. It supports precise motherboard layering and separation, a task that sits between disassembly and the actual IC or connector work. You use it on hardware fault jobs where the board needs separation, component removal or preparation for reballing.
Modular Platform Design for Mixed iPhone Generations
The MS1 platform follows a modular approach. Each iPhone generation gets its own interchangeable heating module, so the base platform stays on your bench while the plate changes. That matters in a busy workshop. One shop may handle iPhone 14 boards in the morning and iPhone 16 boards in the afternoon. Instead of buying a separate full station per generation, you buy the module that matches the incoming device. The Mijing catalogue also lists separate modules for other iPhone series, so you confirm the series before you order.
Compatibility Scope You Can Rely On
This module targets the iPhone 16 series only. The verified model list covers iPhone 16, 16 Plus, 16 Pro, 16 Pro Max and 16e. Do not treat it as a universal plate for older iPhone generations. If your repair queue includes older boards, match each generation to its own MS1 module. This keeps heat placement correct and protects the boards you work on.
Pairing It With Your Existing Bench Equipment
A heating module works best as one part of a complete rework setup. You pair it with a hot air station for component removal and a soldering station for pad cleanup. A microscope helps you inspect pads after separation, and a PCB holder keeps the board steady during delicate steps. A multimeter confirms your rails and continuity after reassembly. For BGA work, a reballing kit completes the process. If you plan to expand beyond iPhone, the same repair bench can add ISP pinout tools, eMMC programmers and UFS adapters for Android storage jobs.
Why Technicians Choose This Module
Technicians choose a dedicated module because it removes guesswork from board preparation. You place the iPhone 16 board on a plate made for its generation and start your rework from a consistent baseline. The module is light and compact, so it stores easily next to your other MS1 plates. For shop owners, it also keeps the cost of supporting new iPhone releases low, since the platform you already own does the heavy lifting. If you service the iPhone 16 range regularly, this module gives your bench a clear, repeatable preparation step before every board-level repair.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Interchangeable heating plate for the Mijing iRepair MS1 platform
- ✓Dedicated to the iPhone 16 series
- ✓Covers iPhone 16, 16 Plus, 16 Pro, 16 Pro Max and 16e
- ✓Supports precise motherboard layering and separation
- ✓Swaps in and out so one MS1 base serves several iPhone generations
- ✓Light and compact for easy storage beside other MS1 modules
- ✓Ships as a single module, ready to fit the MS1 platform
- ✓Extends your existing MS1 setup instead of replacing it
Specifications
| Brand | Mijing |
|---|---|
| Model | iRepair MS1 Universal Module for iPhone 16 Series |
| Category | Preheating Platform Module |
| Compatibility | Mijing iRepair MS1 universal desoldering platform |
| Supported Devices | iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max / 16e |
| Technology | Interchangeable heating plate |
Common Repair Uses
- ✓Board-level iPhone 16 series repair on the MS1 platform
- ✓Motherboard layering and separation
- ✓Controlled preheating before hot air rework
- ✓Component desoldering on iPhone 16 boards
- ✓Board preparation before reballing
- ✓Hardware fault diagnosis that needs board separation
- ✓IC change preparation on iPhone 16 logic boards
Compatible Devices
- ✓Mijing iRepair MS1 platform with the iPhone 16 series
- ✓iPhone 16
- ✓iPhone 16 Plus
- ✓iPhone 16 Pro
- ✓iPhone 16 Pro Max
- ✓iPhone 16e
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use this module without the Mijing MS1 platform?
Can this module handle older iPhone boards such as the iPhone 14 or 15?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



