Relife Cutting Blade Grinding Head for Mobile Repair
₨ 150
Relife Cutting Blade Head
The Relife cutting blade grinding head gives your cutting and degumming handpiece a thin, straight cutting edge for the jobs a glue needle cannot handle. You slice through covers and brackets and back out stubborn screws without prying at the board. The Relife RL-056D kit ships with this blade next to its glue-removal needles and wool polishing heads, so one handpiece covers cutting, degumming and polishing on your repair bench. Mechanicpk stocks the head for technicians and refurbishers in Pakistan who run OCA glue cleanup and screen prep every day. Keep a spare on hand so a worn edge never stops your next display job.
In stock
Relife Cutting Blade Grinding Head for Precision Screen Prep
The Relife cutting blade grinding head is the cutting attachment in the Relife RL-056D intelligent cutting and degumming system. The handpiece runs a forward and reverse motor with six speed levels, and the blade turns that motor into a thin, neat cutter. If you strip screens, trim covers or free brackets every day, a dedicated blade gives you cleaner cuts than a screwdriver or a craft knife.
Cutting Role Inside the RL-056D Workflow
The RL-056D handles three tasks: glue removal, cutting and polishing. Each task uses its own head. The hard and fine needles clear OCA and original hard glue, the wool grinding heads polish, and the cutting blade handles everything that needs a straight, controlled cut. Technicians cut covers and brackets with it and use it to remove screws. You change heads on the handpiece, so you can finish glue cleanup and move to cutting without picking up a second tool.
Speed control matters here. You choose among six levels, and the motor reverses direction when the cut calls for it. A blade that spins steadily at low speed stays easier to guide along a bracket edge than a rough, fast pass.
Where It Fits on Your Repair Bench
In a typical display job, you separate the screen, clean the old adhesive, and prepare the frame for relamination. The blade comes in when a plastic cover or bracket blocks that prep. You trim it, clear the obstruction, and return to glue removal with the needles. On screens with a hard display problem such as a cracked panel stuck under a bracket, the blade lets you cut around the obstruction instead of forcing it.
Pair the handpiece with a microscope when you work near thin edges, and keep a PCB holder under the board when a cut sits close to the motherboard. Hot air stations still do the heating work. The blade only handles the mechanical cutting once the adhesive softens and the parts move.
Buyer Notes for Workshops and Service Centers
Spare blades matter in a shop that runs cutting jobs all week. A dull edge drags, and a drag leads to slips on a thin frame. Stock a replacement so your technician swaps heads in a minute instead of waiting on a restock.
Check the head against your handpiece before you order. The RL-056D kit includes one cutting blade, and Mechanicpk lists this head for that system. Confirm your exact model with the team if you run a different Relife handpiece.
For workshops that refurbish screens in volume, the RL-056D system replaces slow manual scraping and the chemical products that go with it. The blade completes that system as the cutting head, and Mechanicpk supplies it to repair shops, service centers and refurbishers across Pakistan.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Thin, straight cutting edge
- ✓Works with the Relife RL-056D cutting and degumming machine
- ✓Six-speed handpiece control for steady cuts
- ✓Forward and reverse motor direction on the handpiece
- ✓Cuts covers and brackets
- ✓Removes screws
- ✓Fast head change on the handpiece
- ✓Fits into a combined glue removal, cutting and polishing workflow
Specifications
| Brand | Relife |
|---|---|
| Category | Cutting & Grinding Tools |
| Compatibility | Relife RL-056D intelligent cutting and degumming machine |
| Supported Devices | Mobile phone and tablet screens |
| Technology | Cutting blade head for an electric cutting and degumming handpiece |
Common Repair Uses
- ✓Cutting and glue-prep tasks during screen repair and refurbishment
- ✓OCA glue removal workflows alongside the glue needles
- ✓Preparing screens before relamination
- ✓Cutting phone covers
- ✓Cutting brackets
- ✓Removing stubborn screws
- ✓Straight, thin cuts near a screen edge
- ✓Clearing obstructions before glue cleanup
- ✓Screen refurbishment prep for repair shops
Compatible Devices
- ✓Relife RL-056D handpiece, used on mobile phone and tablet screens
- ✓Relife RL-056D intelligent cutting and degumming machine
- ✓Mobile phone screens
- ✓Tablet screens
- ✓Curved screens
- ✓Cold light screens
- ✓Backlit screens
- ✓OCA-bonded screens
- ✓Original hard-glue screens
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the Relife cutting blade remove OCA glue?
Does the Relife RL-056D kit include a cutting blade?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



