Relife HW31A Jump Wire Conductive Silver Paste
₨ 1,000
Nano Silver Jump Wire Paste for PCB Repair
Relife HW31A Jump Wire Conductive Silver Paste restores broken PCB tracks, ITO lines, and flexible screen circuits without micro wire welding. The paste uses nano silver powder with particles under 100nm and 85% solid content, so it carries current efficiently and holds its conductivity and adhesion under heat. You apply it, heat it, and let it cure into a solid conductive path on PCB, glass, ceramic, LED, PVC, and flat cable surfaces. Technicians in Pakistan use it for motherboard track breaks and for yellow, green, or white screen faults after water damage on Apple and Android phones.
In stock
Relife HW31A Conductive Silver Paste for Jump Wire Repair
Relife HW31A conductive silver paste gives you a controlled way to rebuild a broken conductive path when a micro wire is too risky to weld. On a dead phone with a cut track or a hairline break on a flex, traditional jumper wire work means heat, lifted pads, and scrapped boards. HW31A replaces that step. You apply the paste across the gap, heat it, and let it cure into a solid conductive bridge. Relife positions HW31A for PCB track repair, ITO lines, and flexible screen circuits, and Mechanicpk supplies it to Pakistani repair benches, service centers, and training institutes that want a repeatable fix on fine lines. You get a consumable that targets open lines only, so you use it where it fits and keep your soldering tools for component work.
Nano Silver Formulation and Conductivity
The HW31A formulation, a silver paste for PCB track repair, uses nano-level silver powder with a particle size below 100nm and a solid content of 85%. Fine particles pack tightly into a narrow gap, so the cured line carries current efficiently across a break. The paste keeps its conductivity and adhesion at high temperatures, which matters on boards that run warm or return to the hot air station for other work. It bonds to PCB, glass, ceramic, LED, PVC, and flat cable surfaces, and it works on curved, flat, and heat-exposed areas. Because the paste forms the path itself, you skip the micro wire and the weld, and you lower the risk of PCB burning or pad lifting. One tube covers motherboard tracks, flex cable lines, and glass-side ITO traces, so you stock fewer consumables.
Jump Wire Workflow and Where HW31A Fits
Start by finding the exact break. Check continuity with your multimeter, then clean both ends of the damaged track and clear the coating so the paste contacts bare conductor. Lay the paste across the gap in a thin, even line that overlaps both exposed ends, then heat and cure it. Check continuity again before you reassemble the board. A microscope helps you keep the line narrow on fine tracks, and a PCB holder keeps the board steady while the paste cures. When the fault sits near a BGA or CPU, finish your soldering, reflow, and reballing work first, then bridge the track with HW31A. Technicians call this step jumper lagana, and the paste does the job without a wire.
Inside the wider PCB repair process, HW31A sits after diagnostics and before final testing. You trace the hardware fault, confirm the open line with the multimeter, repair the path, and retest. That sequence applies to a charging issue caused by a cut track as much as to a display fault, because the paste only restores continuity where the copper broke. It does not replace component work: a failed IC still needs IC change karna, and a dead short needs proper fault tracing first. Use the paste for open lines and keep your soldering station and hot air station for component-level jobs. Technicians who split work this way keep each tool on the job it suits.
ITO Flexible Screen Repair and Flat Cable Fixes
Relife HW31A conductive silver paste also targets display problem repairs. After water damage, many Apple and Android screens show yellow, green, or white patches because line connections fail. The paste works as an ITO flexible screen repair paste, restoring ITO conductive circuits and flexible screen lines, so you can repair the line before you decide to replace the display. Flat cable repair follows the same method: expose the broken line, bridge it with a thin paste line, heat, cure, and test. Shops that handle LED boards, sensors, and general electronics can use the same paste on ceramic, glass, and PVC surfaces. For a repair shop or service center, HW31A is a small consumable that handles motherboard track breaks, screen line faults, and flat cable repairs. Pair it with a multimeter and a microscope from the Mechanicpk catalog and one order covers the test, inspect, and repair steps.
| Weight | 0.6 kg |
|---|
Key Features
- ✓Nano silver powder with particle size below 100nm
- ✓85% solid content for efficient current transmission
- ✓Keeps conductivity and adhesion at high temperatures
- ✓Apply, heat, and cure workflow replaces micro wire welding
- ✓Bonds to PCB, glass, ceramic, LED, PVC, and flat cable
- ✓Works on curved, flat, and heat-exposed areas
- ✓Lowers the risk of PCB burning and pad lifting
- ✓Repairs motherboard PCB breaks plus ITO and flexible screen circuits
Specifications
| Brand | Relife |
|---|---|
| Model | HW31A |
| Category | Jump Wire Conductive Silver Paste |
| Compatibility | PCB, glass, ceramic, LED, PVC, and flat cable surfaces |
| Supported Devices | Apple and Android phone motherboards and screens (universal, not model-specific) |
| Technology | Nano silver powder, particle size below 100nm, 85% solid content |
| Material | Conductive silver paste |
Common Repair Uses
- ✓Open-line repair across phone boards, screens, and flex cables
- ✓Motherboard PCB track break repair
- ✓Yellow, green, or white screen line repair after water damage
- ✓ITO conductive circuit restoration
- ✓Flexible screen circuit restoration
- ✓Jump wire repair in place of micro wiring and welding
- ✓Flat cable broken line repair
- ✓Fine-line repair with lower risk of PCB burning or pad lifting
- ✓Repairs on curved, flat, and heat-exposed areas
Compatible Devices
- ✓Universal consumable for Apple and Android phone boards and screens, scoped by surface type, not by individual model
- ✓iPhone motherboard PCB tracks
- ✓Android phone motherboard PCB tracks
- ✓iPhone display ITO lines
- ✓Android display ITO lines
- ✓Flexible screen circuits
- ✓Flat cable and flex cable lines
- ✓LED boards and sensor boards
- ✓Computer and general electronics PCBs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What are the silver particle size and solid content of Relife HW31A?
Can Relife HW31A replace micro wire jumpers on a broken PCB track?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



