Sugon 202 Iron Handle – 60W Ceramic Soldering Pen

₨ 2,500

Replacement Handle for Sugon 202 Rework Station

The Sugon 202 Iron Handle is the soldering pen for the iron side of the Sugon 202 two-in-one rework station. It works with the station’s 60W ceramic heater, a 200°C to 500°C range, and ±1°C temperature stability. The ESD-safe design protects static-sensitive ICs, and the induction sleep function stops heating when you rest the pen on its stand. When your original pen wears out on a busy repair bench, this handle brings the iron side of your 202 station back to full service without replacing the whole machine.

Out of stock

20 People watching this product now!
Description

Sugon 202 Soldering Iron Handle for Controlled Board-Level Soldering

The Sugon 202 Iron Handle gives your rework bench a dedicated soldering pen for the iron side of the Sugon 202 station. This Sugon 202 soldering iron handle works with the station’s 60W ceramic heating system, a temperature window of 200°C to 500°C (392°F to 932°F), and a stated stability of ±1°C. Technicians who run a Sugon 202 for daily mobile phone repair know the iron handle takes the heaviest wear on the machine: repeated heat cycles, cable flex, and constant lifting and resting. A tired pen costs you accuracy on every joint, so a working handle matters as much as the hot air side.

Technical Capability of the 202 Iron Side

The soldering iron on the Sugon 202 delivers 60W through a ceramic heater and carries an ESD design, which matters when you work near charging ICs, PMICs, and audio ICs that static can damage. Stability of ±1°C keeps your joint temperature steady once you set it, so you solder lead-free and leaded joints without chasing the display. The station stores three one-key temperature memories for the iron, so you jump between a low setting for flex connector pads and a higher setting for ground planes with one press. The station also switches between Celsius and Fahrenheit, and the handle follows whichever mode you pick. The large integrated display shows the set temperature for the iron next to the hot air readout, so you confirm both sides of the station at a glance before you touch the board. That clear feedback loop matters most when you move between delicate flex pads and heavier shield frames in the same repair.

Sleep Function and Daily Bench Behaviour

The Sugon 202 iron uses induction dormancy. When you place the handle on the stand, heating stops and the iron enters sleep, and lifting it wakes the iron again. You get a safer bench during long repair sessions, less idle heat on your tip, and no need to reach back to the station every time you pause. Technicians who work on several dead phone boards in a row appreciate this, because every board change means a short pause with the iron parked. Check that your station is a Sugon 202 before you order, because this handle is matched to that unit and Mechanicpk does not list it as a universal pen for other Sugon stations.

Where It Fits in Your Mobile Repair Workflow

Hot air removes the chip and the iron finishes the job. After you lift a BGA or SMD IC with the hot air gun on the same Sugon 202, the iron handle cleans the pads, tins the contacts, and sets jumper wires on damaged tracks. For a charging issue you replace the charging port connector or rebuild a lifted pad. For a boot loop issue or a dead phone caused by a hardware fault, you solder fine wire to ISP test points before you move to an eMMC programmer or a UFS adapter. Reballing kits, a good microscope, PCB holders, and a multimeter round out the bench, and the iron handle ties those tools together at the moment of contact. Hot air stations and soldering stations each cover half of the job, and the 202 puts both in one footprint, which saves bench space in a crowded Pakistani repair shop where every tray and holder competes for room. If you outgrow the 202, a dedicated soldering station with a separate precision pen gives you the next step up.

Why Technicians Keep a Spare Handle

Shops that repair boards all day treat the pen as a consumable. Keeping a spare Sugon 202 Iron Handle on the shelf means a failed pen never stops your queue of hang on logo, display problem, and network issue jobs. You swap the handle, reset your temperature memory, and keep working. For service centres with more than one technician on a 202, a spare handle turns a half-day breakdown into a two-minute change.

Additional information
Weight0.25 kg
Q & A
Please login to post questions

Key Features

  • 60W soldering iron output on the Sugon 202 station
  • Ceramic heater construction
  • 200°C to 500°C (392°F to 932°F) working range
  • ±1°C temperature stability
  • ESD-safe design for static-sensitive ICs
  • Induction sleep when you rest the pen on the stand
  • Works with the station’s three one-key temperature memories
  • Works with the station’s Celsius/Fahrenheit display switch

Specifications

Brand EntitySugon
Product EntitySugon 202 Iron Handle (soldering iron pen for the Sugon 202 2-in-1 rework station)
Technology Entity60W ceramic heater, ESD design, induction sleep, ±1°C temperature stability
Compatible Device EntitiesSugon 202 SMD rework station; Android and iPhone logic boards (general soldering use)
Repair Process EntityPCB soldering, SMD/IC rework, jumper wire repair, ISP wire attachment
Industry EntityMobile phone repair, GSM hardware repair

Common Repair Uses

  • Charging port replacement and pad rebuilding
  • Jumper wire soldering on damaged tracks
  • Flex connector pad repair
  • Small SMD component replacement (capacitors, resistors)
  • Pad cleaning and tinning after hot air IC removal
  • Fine wire attachment to ISP test points on dead phone boards
  • Battery connector repair
  • Solder wick desoldering of old joints

Compatible Devices

  • Verified scope is the Sugon 202 2-in-1 rework station (soldering iron side). The handle is device-agnostic soldering hardware for phone boards. Mechanicpk does not document it for other Sugon models.
  • Sugon 202 SMD rework station (soldering iron port)
  • I-tip soldering iron tip supplied with the Sugon 202 station
  • Android phone motherboards (Samsung, Oppo, Vivo, Infinix, Tecno, Xiaomi), as a general soldering tool
  • iPhone logic boards, as a general soldering tool

FAQ

What is the product name?
The product name is Sugon 202 Iron Handle.
What is the brand of this product?
The brand of this product is Sugon.
What is the model of this product?
The model of this product is Sugon 202 Iron Handle.
What is this product used for?
This product is used as the soldering iron handle for the Sugon 202 two-in-one rework station, handling PCB soldering, SMD component work, and jumper wire repairs.
Which devices are compatible with this product?
This product is compatible with the Sugon 202 2-in-1 rework station. It works on phone boards of any brand as a general soldering tool.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What temperature range does the Sugon 202 iron handle support?
The soldering iron on the Sugon 202 covers 200°C to 500°C (392°F to 932°F) with ±1°C temperature stability.
Does the Sugon 202 iron handle have a sleep function and ESD protection?
Yes. The iron stops heating and enters sleep when you place the handle on the stand, and the iron uses an ESD-safe design with a 60W ceramic heater.