RF4 RF-FO33 Large Double Arm Base Stand for Microscope

₨ 32,000

Microscope Boom Stand for Mobile Repair

The RF4 RF-FO33 Large Double Arm Base Stand carries a stereo or trinocular microscope head on a 250 × 180 mm base and a 365 mm × φ32 mm pillar, with a 360° swing arm that sweeps the lens across a full motherboard. A 76 mm lens aperture, 155 mm center distance, and 50 mm lifting range define the mount, so you raise the head over shields and lower it back to fine pads for reballing, IC replacement, and hardware fault tracing. Mechanicpk supplies it to workshops that need a steady microscope boom stand for mobile repair in Pakistan.

In stock

14 People watching this product now!
Description

Microscope Boom Stand for Mobile Repair Benches

The RF4 RF-FO33 Large Double Arm Base Stand turns a stereo or trinocular microscope head into a boom-mounted inspection rig for your repair bench. If you search for a microscope boom stand for mobile repair, the RF-FO33 solves a specific bench problem: a head that shakes at high zoom or stops short of the far corner of a motherboard. RF4 builds it around a 250 × 180 mm base, a 365 mm pillar with a 32 mm diameter, and a double swing arm that carries the head across the board, so you never drag a dead phone’s mainboard under the lens. Pair it with a soldering station, a hot air station, and a PCB holder, and the microscope becomes part of a complete rework bench.

Support Geometry That Keeps the Head Steady

Every vibration shows up on the lens at high magnification. RF4 designed the RF-FO33 with a large double-arm base so the swing arm and base hold the microscope steady while you work. The 250 × 180 mm base gives the head a wide footprint, and the 365 mm × φ32 mm pillar gives the arm a thick column to push against. The support parameters list a 32 mm column aperture, a 76 mm lens aperture for the head holder ring, a 155 mm center distance, and a 50 mm lifting range. That lifting range lets you raise the lens over a tall RF shield and drop it back onto a bare pad without loosening the whole arm. The swing arm rotates through 360°, so you can park the head away from the board when you swap a phone and return to the same working position.

Where the RF-FO33 Fits in Board-Level Repair

Microscope work sits at both ends of a repair. You inspect a dead phone’s board for corrosion, lifted pads, and cracked components before you pick up the iron, and you inspect again after rework to confirm clean joints. The RF-FO33 keeps the lens in position for both checks while your hands stay free for tweezers, a multimeter probe, or a hot air nozzle. During reballing, the steady head lets you confirm that every ball sits on its pad before you reflow. During an IC change, it shows you solder bridges and flux residue that the naked eye misses. During charging issue and display problem repairs, it exposes broken connector pads and torn traces on fine-pitch FPC footprints, so you decide between a jumper wire and a full replacement based on what you see. The boom reach covers a full mainboard, so you scan from the charging port to the CPU area without lifting the base. A locked field of view also helps when you connect a camera to the trinocular port of your microscope, because steady footage serves training sessions and gives customers a clear look at the fault.

Choosing the RF-FO33 for Your Workshop

Check one number before you order: the ring on your microscope head must match the 76 mm lens aperture listed for this stand. RF4 supplies the large double arm base with its RF-FO33C (7050Pro), RF-FO33D (6565Pro), and RF-FO33E (6555) trinocular microscopes and with the RF-6558Pro-FO33 set, which makes the stand a direct replacement or upgrade for owners of those heads. Technicians who outgrow a basic stand usually step up when the work shifts from screen and battery jobs to board-level repair, where the lens hovers over one board for an hour at a time. If you currently run a short fixed pillar stand, the double-arm layout adds reach and the 50 mm lifting range adds clearance for shielded boards. Measure your bench as well: the 250 × 180 mm base needs a flat, vibration-free surface close to your soldering station and your PCB holders. Browse the Microscopes, Soldering Stations, Hot Air Stations, Reballing Kits, and Multimeters categories at Mechanicpk to complete the same bench.

Additional information
Weight15.0 kg
Q & A
Please login to post questions

Key Features

  • Large double-arm base designed to keep the microscope steady during operation
  • 250 × 180 mm base for a wide, stable footprint on the bench
  • 365 mm × φ32 mm pillar that supports the swing arm
  • 360° swing arm that sweeps the lens across a full motherboard
  • 76 mm lens aperture holder ring for stereo and trinocular heads
  • 50 mm lifting range for clearance over shields and tall components
  • 155 mm center distance in the published support parameters
  • Metal construction for daily workshop use

Specifications

BrandRF4
ModelRF-FO33
CategoryMicroscope Boom Stand (Large Double Arm Base)
CompatibilityMicroscope heads with a 76 mm lens aperture holder ring
MaterialMetal
DimensionsBase 250 × 180 mm; pillar 365 mm × φ32 mm
Column Apertureφ32 mm
Lens Apertureφ76 mm
Center Distance155 mm
Lifting Range50 mm
Arm Rotation360°

Common Repair Uses

  • Holding a microscope steady over the board during inspection and rework
  • BGA reballing and ball alignment checks
  • IC change and solder bridge inspection
  • Charging port and charging IC pad repair
  • Display and FPC connector pad inspection
  • Hardware fault tracing on dead phone boards
  • Flux residue and corrosion checks during board cleaning
  • Jumper wire repair on lifted pads and torn traces
  • Post-rework quality checks before reassembly

Compatible Devices

  • Universal boom stand for stereo and trinocular microscope heads with a 76 mm lens aperture holder ring; not specific to any phone brand
  • RF4 RF-FO33C (7050Pro) 7-50X trinocular stereo microscope
  • RF4 RF-FO33D (6565Pro) 6.5-65X trinocular stereo microscope
  • RF4 RF-FO33E (6555) 6.5-55X trinocular stereo microscope
  • RF4 RF-6558Pro-FO33 6.5-58X trinocular stereo microscope
  • Other stereo microscope heads with a 76 mm holder ring
  • Boards from any phone brand placed under the microscope, including Samsung, Oppo, Vivo, Infinix, Tecno, and iPhone

FAQ

What is the product name?
The product name is RF4 RF-FO33 Large Double Arm Base Stand.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is RF-FO33.
What is this product used for?
This product is used for holding a stereo or trinocular microscope steady over a phone board during inspection, reballing, and IC replacement.
Which devices are compatible with this product?
This product is compatible with stereo and trinocular microscope heads that fit a 76 mm lens aperture holder ring, including the RF4 RF-FO33C, RF-FO33D, RF-FO33E, and RF-6558Pro-FO33 microscopes.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which microscopes work with the RF4 RF-FO33 stand?
RF4 supplies the RF-FO33 base with its RF-FO33C 7050Pro, RF-FO33D 6565Pro, RF-FO33E 6555, and RF-6558Pro-FO33 microscopes. Any stereo head with a matching 76 mm lens aperture holder ring fits the same mount.
What are the base size and pillar dimensions of the RF4 RF-FO33?
The base measures 250 × 180 mm. The pillar stands 365 mm tall with a 32 mm diameter, and the lifting range is 50 mm.