TE-10 Precision Silver Knife with 5 Blades for Mobile Repair
₨ 300
Precision Knife for Mobile Repair
The TE-10 is a precision knife for mobile repair with a silver aluminum handle and five interchangeable sharp blades. You use it for fine, controlled cuts on your bench: trimming adhesive, slicing protective film, cutting PCB jumper traces and separating bonded layers. The aluminum handle gives your fingers a firm, steady hold, and a plastic blade holder keeps each blade seated. When an edge dulls, you swap in a fresh blade and keep working. Mechanicpk supplies the TE-10 to Pakistani repair shops and service centers that need a dependable cutting tool next to their hot air stations, soldering stations and microscopes.
Out of stock
TE-10 Precision Knife for Mobile Repair: Controlled Cutting at the Board Level
A precision knife for mobile repair earns its place on a technician’s bench through edge quality and grip control, not through extra features. The TE-10 pairs a silver aluminum handle with five interchangeable sharp blades. You get a pointed cutting profile for jobs where a standard hobby knife is too coarse. Repair shops across Pakistan use this style of knife for daily tasks. Each task needs a sharp tip and a steady hand.
Handle and Blade Holder Design
The aluminum handle gives you rigid, balanced control over the cutting tip. A plastic blade holder grips the blade, so you can remove a worn edge and fit a new one in seconds. The silver finish suits a professional bench setup and sits comfortably beside your other hand tools. Because the blades are interchangeable, you keep one handle on your bench and rotate through fresh edges instead of pushing a dull blade through a repair.
Where It Fits in the Repair Workflow
Board-level work often starts with removing material before you touch a component. You cut away old adhesive, lift the edge of a protective film, trim a damaged flex strip or open a cut in a PCB trace for a jumper repair. The TE-10 handles these preparation steps. It does not replace your hot air station for IC removal or your soldering station for rework. It prepares the area so those tools work on a clean surface. When a dead phone comes in after a water-damage or charging fault, you use a fine blade to clear residue around the area you plan to inspect under the microscope.
Handling Tips for Technicians
Cut with the tip, and let the sharp edge do the work rather than pressing hard. Pressure on a thin blade risks slipping across the board and scratching nearby traces. Rest your hand on the bench or on a PCB holder while you cut so the blade stays steady. Replace the blade as soon as the edge drags, because a dull blade needs more force and gives you less control. Keep spare blades in the pack so you never work with a tired edge. Always cut away from your fingers and from components you want to keep intact.
Why Repair Shops Stock This Tool
A reliable cutting tool costs little but saves time on every job. With five blades included, a shop owner can issue one knife per technician and keep spares ready for the whole workshop. The same knife also works on electronics and craft tasks, so a training institute can use it for student practice. If you build out a complete bench, pair the TE-10 with a PCB holder, a multimeter, a reballing kit and a quality microscope. That combination covers cutting, measuring, reballing and inspection.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Silver aluminum handle for a rigid, balanced grip
- ✓Five interchangeable sharp blades in the pack
- ✓Pointed blade profile for fine, controlled cuts
- ✓Plastic blade holder keeps each blade seated
- ✓Quick blade swap when an edge dulls
- ✓Suits PCB, film, adhesive and flex cable preparation
- ✓Compact tool that fits a technician’s bench kit
- ✓Works alongside microscopes, PCB holders and rework stations
Specifications
| Model | TE-10 |
|---|---|
| Category | Precision Knives and Cutting Tools |
| Compatibility | Universal, not device-specific |
| Material | Aluminum handle with plastic blade holder |
| Color | Silver |
Common Repair Uses
- ✓Fine cutting and preparation tasks around the repair bench.
- ✓Trimming old adhesive around screens and back covers
- ✓Slicing protective film and tape
- ✓Cutting PCB traces for jumper wire repairs
- ✓Cleaning residue around components before inspection
- ✓Separating bonded layers and thin plastic parts
- ✓Trimming damaged flex cable edges
- ✓Scraping flux and dried residue from board surfaces
- ✓General electronics and craft cutting
Compatible Devices
- ✓Universal hand tool. It is not tied to one model and suits general mobile repair tasks across brands.
- ✓Samsung smartphones (general film and adhesive cutting)
- ✓iPhone series (general film and adhesive cutting)
- ✓Oppo smartphones (general board preparation)
- ✓Vivo smartphones (general board preparation)
- ✓Infinix smartphones (general board preparation)
- ✓Tecno smartphones (general board preparation)
- ✓Xiaomi and Redmi smartphones (general board preparation)
- ✓Tablets and other small electronics (general precision cutting)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use the TE-10 knife to cut PCB traces for a jumper repair?
How do I change the blade on the TE-10 precision knife?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



