2UUL DA79 Mini MicroTip Sharpener for Tweezer Tips

₨ 6,500

Precision Tip Sharpener for Repair Benches

The 2UUL DA79 Mini MicroTip Sharpener restores worn tweezer tips, blade tips, and small precision tool points on your repair bench. Power it through the USB-C port, choose 5V or 9V, and set disc speed with the built-in knob. The package includes 12 grinding sheets and a hand polishing pad, so you move from reshaping to finishing without extra purchases. A screw-mount base lets you fix the unit to your workbench for steady control. Mechanicpk supplies this tweezer tip sharpener for mobile repair technicians across Pakistan who need aligned, clean tips for board-level work.

In stock

16 People watching this product now!
Description

2UUL DA79 Mini MicroTip Sharpener: A Tweezer Tip Sharpener for Mobile Repair

The 2UUL DA79 Mini MicroTip Sharpener works as a compact tweezer tip sharpener for mobile repair benches, where tip condition decides how cleanly you pick, place, and scrape. A bent or rounded tweezer tip slips off small SMD components, drags across pads, and slows every hardware fault job on the board. This unit gives you a dedicated electric grinding station for reshaping those tips, so you stop sanding them by hand on loose sandpaper. You get a tool built around three practical controls: a selectable voltage input, a variable speed knob, and replaceable abrasive sheets. That combination lets you match the grinding action to the metal in front of you instead of relying on one fixed setting. Mechanicpk stocks it for technicians who treat precision tools as part of the repair process.

USB-C Power With 5V and 9V Modes

The DA79 takes power through a USB-C port and runs from a 5V or 9V input. LED indicators on the body show which voltage the unit uses, so you confirm the setting before the disc spins. The 5V setting suits delicate work such as polishing probe tips, while the 9V setting gives you more grinding force on tough metal tips. A knob adjusts disc speed smoothly, and the top speed reaches 10,000 RPM. Lower speeds help you avoid overheating the metal on thin tweezer points. Set the knob low when you work on fine titanium points and raise it when a stainless steel tip needs real material removal. Most modern USB-C chargers and power banks run the unit, so any bench socket works without a dedicated adapter. Because the unit draws power from standard USB-C sources, your bench layout stays clean, with no bulky transformer sitting beside your microscope and soldering station.

Grinding Sheets, Polishing Pad, and Workbench Mounting

The package includes the grinding machine, 12 grinding sheets, and one hand polishing pad. The sheets come in multiple grits, listed from 400 up to 3000, so you start coarse to reshape a damaged tip and finish fine to leave a smooth point. Work through the grits in order. Start with a coarse sheet only when the tip is badly bent or worn, then step to the finer sheets until the surface looks even under your microscope. Swap sheets once they clog or lose cut, and replace them instead of pressing harder on a tired disc. The hand polishing pad handles the final pass when you want to refine a tip without the disc. DA790 replacement sheets come in a box of 12, which keeps the machine running after the first set wears out. The base has screw holes, so you fix the unit to your workbench and reduce vibration during grinding. At 85 g net weight and 60 × 60 × 47 mm, it also fits into a toolkit or work bag when you move between the shop and a service call.

Where It Fits in Your Board-Level Repair Workflow

Tweezers, blade tips, and small screwdriver tips wear down on every board you touch. Bent points, rounded corners, and oxidised tips cost you time when you lift shields, hold jumper wires, clean pads, or place ICs during IC change work. The DA79 restores tip geometry after a drop, removes oxide and dirt from working tips, and realigns tweezer points so both sides meet. It handles titanium and stainless steel tweezers, which covers the common tweezer sets on a mobile repair bench. A sharp, aligned tweezer matters most during fine rework. When both points meet cleanly, you grip a small capacitor, a flex connector, or a jumper wire without it twisting away. Technicians in Pakistani repair shops who handle dozens of boards a day, from dead phone cases to boot loop issue and hang on logo repairs, notice the difference in speed and accuracy over a week of work. Keep it next to your microscope, so you can inspect a tip under magnification before and after grinding. Pair it with your PCB holder, soldering station, hot air station, and reballing kit so sharp, aligned tools stay within reach on charging issue and display problem boards. Verified use covers tweezers, blades, small screwdriver tips, and probe tips.

Additional information
Weight0.85 kg
Q & A
Please login to post questions

Key Features

  • USB-C power input with selectable 5V and 9V settings
  • LED indicators show the active voltage
  • Variable speed knob with up to 10,000 RPM
  • 12 replaceable grinding sheets in multiple grits
  • Hand polishing pad for final finishing
  • Screw-mount base for stable workbench use
  • Compact 60 × 60 × 47 mm body at 85 g net weight
  • DA790 replacement sheets available in boxes of 12

Specifications

Brand2UUL
ModelDA79
CategoryMini MicroTip Sharpener (electric precision tip grinder)
CompatibilityUniversal bench tool for tweezer, blade, small screwdriver, and probe tips — not phone-model specific
TechnologyElectric disc grinding with variable speed control and selectable 5V/9V input
Input Voltage5V / 9V DC via USB-C
Rotation SpeedUp to 10,000 RPM
Abrasives12 grinding sheets (grits listed from 400 to 3000) and 1 hand polishing pad
Dimensions60 × 60 × 47 mm
Weight85 g (net)

Common Repair Uses

  • Tip maintenance for the tools used in board-level mobile repair
  • Reshaping bent or worn tweezer tips for picking and placing small SMD components
  • Realigning tweezer points so both sides meet
  • Restoring tool geometry after a drop
  • Removing oxide and dirt from working tips
  • Sharpening blade tips used during board prep
  • Reconditioning small screwdriver tips
  • Polishing probe tips for cleaner contact
  • Finishing tips by hand with the polishing pad

Compatible Devices

  • Universal — works on precision tool tips, not specific phone models or chipsets
  • Stainless steel precision tweezers
  • Titanium precision tweezers
  • Knife and blade tips
  • Small screwdriver tips
  • Probe tips
  • Tool tips with oxide or dirt buildup
  • Micro-surgical and service instrument tips
  • Power source: most USB-C chargers and power banks

FAQ

What is the product name?
The product name is 2UUL DA79 Mini MicroTip Sharpener.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is DA79.
What is this product used for?
This product is used for sharpening and reconditioning tweezer tips, blade tips, small screwdriver tips, and probe tips.
Which devices are compatible with this product?
This product works with precision tool tips such as stainless steel and titanium tweezers, blades, small screwdrivers, and probes. It is a universal bench tool and does not depend on a phone model or chipset.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which tweezer and tool materials can the 2UUL DA79 sharpen?
The 2UUL DA79 sharpens stainless steel and titanium tweezers, and it also reconditions blade tips, small screwdriver tips, and probe tips.
How do I power the 2UUL DA79 and what do the 5V and 9V settings do?
You power the 2UUL DA79 through its USB-C port using a modern USB-C charger or power bank. The 5V setting suits delicate work such as probe tips, and the 9V setting gives more grinding force for tough metal tips. LED indicators show the active voltage.