SUNSHINE SS-719 Y0.6 Magnetic Aluminum Screwdriver
₨ 1,099
Y0.6 Tri-Wing Screwdriver for iPhone Repair Benches
The SUNSHINE SS-719 in the Y0.6 size gives your bench a dedicated driver for triangle screws found inside iPhones and Apple Watch cases. Its magnetic tip holds small fasteners steady during removal, and the S2 steel shaft resists wear when you back out tight screws. The aluminium and steel handle stays light in the hand, so long disassembly sessions feel less tiring. Pair it with an ESD-safe mat and a magnetic tray so no screw is lost during an IC change or battery replacement.
In stock
Y0.6 Tri-Wing Screwdriver Built for Phone Teardown
The Y0.6 tri-wing screwdriver from the SUNSHINE SS-719 line gives you a dedicated bit for triangle fasteners inside iPhones and Apple Watch cases. Triangle screws turn up in more spots than most technicians expect, and a mismatched or worn bit can strip the head and turn a simple screen change into a rework job. This driver is cut to the Y0.6 profile, so you seat the tip cleanly and apply torque without rounding the screw. The magnetic tip and aluminium handle keep your workflow steady from the first fastener to the last. Whether you run dead phone diagnostics, battery swaps, or board-level access, this driver belongs in your daily kit.
Why a Y0.6 Tri-Wing Screwdriver Profile Matters on iPhone Repair
Apple uses triangle screws across several iPhone assemblies, and each size is cut for a specific head. The Y0.6 tip matches the smaller triangle fasteners you meet during teardown, so it earns a place beside your larger sizes on the bench. Feel for a firm, centered seat before you turn. If the bit wobbles or cams out, stop and inspect the screw head for wear instead of forcing rotation. Keep the driver square to the screw and apply steady downward pressure while you turn. This habit protects the screw, the housing, and the board beneath it. Experienced technicians keep two or three sizes at hand, because a tip one size too large chews the head, while one too small rides up and damages the recess. Test the fit on a spare screw when you can.
Shaft Material, Handle Design, and Weight
The SS-719 shaft is made from S2 steel, a tool steel chosen for hardness and wear resistance during repeated fastener work. The handle combines aluminium and steel, which keeps the tool balanced in the hand. The listed weight is about 0.15 kg, so the driver sits comfortably in a shirt pocket. The anti-slip grip increases friction, which helps when your fingers are damp or when you apply firm pressure to a stubborn screw. A slim waist shape lets you reach into tight spaces without losing control. Keep the handle clean and dry, and check the tip for rounding before every session.
The magnetic tip holds screws during removal, so fasteners stay on the bit instead of dropping into the case. This matters most with small screws that fall into battery compartments or under shields. Apply a light, consistent pull rather than pressing hard, because excessive magnetism draws fine debris onto the tip. Clean the bit with a dry brush after each job to keep it working as intended.
Working Safely With Triangle Screws on Phones and Watches
Start every job by confirming the screw head matches the bit. Place each removed screw in a labeled magnetic tray in the order it came out, because triangle fasteners can differ in length across sections of the same device. Hold the phone on a padded mat and avoid lateral force on the housing. When you service an Apple Watch case, use the same controlled approach, since small case screws strip quickly. Keep a separate driver for other tri-wing sizes, because the Y0.6 profile does not fit every model. Finish each session by inspecting the tip under a magnifier, and retire any bit with rounded edges or a chipped point.
Your bench flow matters as much as the tool. Photograph the device before teardown, lay out screws by group, and keep flex cables clear of your work area. Repeat the same sequence on each job and the process becomes faster and safer. A disciplined routine also shortens rework time when a board needs to go back into its housing. Use this Y0.6 tri-wing screwdriver as the consistent first step in every iPhone teardown you run.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Magnetic tip holds screws during removal
- ✓Y0.6 tri-wing profile for triangle fasteners
- ✓S2 steel shaft for repeated fastener work
- ✓Aluminium and steel handle
- ✓Anti-slip grip design
- ✓Slim waist shape for tight access
- ✓Listed weight of about 0.15 kg
- ✓Suits repeated bench use on iPhone and Apple Watch teardown
Specifications
| Brand | SUNSHINE |
|---|---|
| Model | SS-719 |
| Category | Screwdriver |
| Compatibility | Y0.6 tri-wing (triangle) fastener heads |
| Supported Devices | Apple iPhone internal triangle screws, Apple Watch triangle case screws |
| Technology | Magnetic tip |
| Material | S2 steel shaft, aluminium and steel handle |
| Weight | 0.15 kg |
Common Repair Uses
- ✓Removing internal triangle screws during iPhone battery replacement
- ✓Opening the lower assembly during iPhone screen replacement
- ✓Backing out shield-area triangle screws before an IC change workflow
- ✓Removing Apple Watch case screws during battery service
- ✓Dead phone diagnostics where case disassembly is required
- ✓Reseating triangle-head screws during reassembly with controlled torque
- ✓Bench teardown at repair shop intake
- ✓Teaching Y-type head handling in technical training courses
Compatible Devices
- ✓Verified scope is Y0.6 triangle heads on iPhone and Apple Watch; other entries are universal, not device-specific.
- ✓Apple iPhone internal triangle screws (Y0.6 head)
- ✓Apple Watch triangle case screws
- ✓Y0.6 tri-wing fasteners in other phone assemblies (universal, not device-specific)
- ✓Small-format electronics using Y-type tri-wing heads (universal, not device-specific)
- ✓Triangle-head fasteners sized to 0.6 on watch and phone assemblies
- ✓Manual bit use with the SS-719 handle on small tri-wing heads
- ✓Repair bench teardown work on iPhone and Apple Watch
- ✓Not designed for Phillips, Torx, or Pentalobe heads
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can this screwdriver remove iPhone internal triangle screws?
What steel is the shaft made from?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



