Back to products
 YCS 11C Titanium Alloy Blue Straight Tweezere
YCS 11C Titanium Alloy Blue Straight Tweezers Original price was: ₨ 1,600.Current price is: ₨ 1,350.

YCS-D02 Boot Power Cord Android Cable

₨ 2,200

YCS D02 Android Power Boot Cable

The YCS-D02 Boot Power Cord Android Cable gives Android technicians a battery-free way to power-test a motherboard and check charging detection on the bench. You connect it in place of the battery, then see whether a dead phone, a charging issue or a hang on logo case starts on the board or in the battery. A flexible, bend-resistant wire, a firm buckle and a wire separation design keep contact stable and help avoid short circuits. Mechanicpk supplies the YCS D02 to repair shops and service centers across Pakistan that need a fast, consistent first test on every Android job.

In stock

14 People watching this product now!
Description

YCS D02 Android Power Boot Cable for Board-Level Testing

The YCS-D02 Boot Power Cord Android Cable lets you power an Android motherboard on the bench without a battery. When a dead phone lands on your table, this YCS D02 Android power boot cable replaces the battery connection, so you can test power-on behavior and charging detection straight from the board. That separates a hardware fault on the board from a tired battery within minutes. Mechanicpk supplies it to Pakistani repair shops and service centers that handle Huawei, Xiaomi, Samsung and other Android boards every day.

Where the Cable Fits in Your Repair Workflow

Board-level diagnosis starts with one question: does the board power up on its own? Connect the cable to the battery connector of the Android motherboard, power it from your bench source, and watch the response. A board that stays dead on the cable points you toward the power path, the PMIC or a short circuit. A board that boots points you toward the battery or its connector. You run the same check on a charging issue, a hang on logo case or a boot loop issue, because the test removes battery variables from the result. After an IC replacement or a connector repair, you use the cable again to confirm the board powers on and detects charging before you reassemble the phone. That habit keeps you from closing a device and then reopening it to chase a fault you could have caught on the open bench.

In a workshop that opens dozens of Android phones a day, you triage first and strip later. The cable sorts jobs into battery faults, which you close fast with a replacement, and board faults, which you route to the rework bench. That triage protects your bench time, keeps customer turnaround short, and tells you what to quote before you commit hours to a repair.

Build Details That Matter on a Busy Bench

Technicians handle these cables dozens of times a day, so build quality decides how long one lasts. The YCS D02 uses a flexible, bend-resistant wire with a wear-resistant finish that holds its shape under repeated tension. A firm buckle at the board end keeps the connection steady, which cuts the contact drops that waste time during testing. The wire separation design keeps conductors apart to avoid short circuits, and the firm solder joints take routine pulling without loosening. An extended soft row gives you room to position the board on a PCB holder or under a microscope without stretching the lead.

Stable contact matters most on boards where a marginal connection mimics a dead phone, so a cable that grips the connector firmly protects the accuracy of every reading you take. Replace a worn cable early, because a loose lead produces false dead results that send you hunting for faults that do not exist.

Pairing the YCS D02 Android Power Boot Cable with Your Bench

The cable covers the power-on stage, and the rest of your bench covers the repair. Once the YCS D02 Android power boot cable shows a board dead or behaving oddly, you move to a multimeter for rail and short checks, a microscope for inspection, and a hot air station or soldering station for the IC change. Reballing kits and PCB holders support the rework. Test boxes, ISP pinout tools, eMMC programmers and UFS adapters take over when the fault sits in storage or firmware instead of power. YCS also lists a separate D01 model for iPhone boards, so you keep the D02 for your Android jobs and avoid mixing connectors across platforms. Start with the cable, then work outward: confirm power, check for shorts, locate the fault, repair it, and run the cable one last time to verify.

Shops that outgrow a basic battery test setup add this cable as the first step on every Android dead phone job. The supplier’s page names Huawei, Xiaomi and Samsung as supported Android brands, so check the battery connector on your most common boards before you stock several units. Order the YCS-D02 from Mechanicpk and put a consistent power-on test at the start of your Android workflow.

Additional information
Weight0.25 kg
Q & A
Please login to post questions

Key Features

  • Battery-free power-on and charging detection for Android motherboard repair
  • Highly flexible, bend-resistant wire for daily workshop handling
  • Wear-resistant, durable construction for stable long-term use
  • Wire keeps its shape under tension without deformation
  • Precise, firm buckle for steady board contact
  • Extended soft row for flexible positioning on the bench
  • Wire separation design to avoid short circuits
  • Firm solder joints for safe, stable operation

Specifications

BrandYCS
ModelD02
CategoryAndroid Power Boot Cable (Mobile Repair Accessories)
CompatibilityAndroid phone motherboards (Android version of the YCS D01/D02 pair; D01 covers iPhone)
Supported DevicesHuawei, Xiaomi, Samsung and other Android phones

Common Repair Uses

  • Battery-free power-on and charging-detection testing on Android boards
  • Power-on testing of a dead phone without the battery
  • Charging detection check on a board with a charging issue
  • Separating a battery fault from a board-level hardware fault
  • Testing a boot loop issue with a stable power source
  • Checking a hang on logo board before storage or firmware work
  • Confirming power-on after an IC replacement
  • Verifying a battery connector repair before reassembly
  • Quick triage of incoming Android jobs at the repair bench

Compatible Devices

  • Android phone motherboards; brand-level scope named by the supplier listing
  • Huawei Android phones
  • Xiaomi Android phones
  • Samsung Android phones
  • Other Android phones (general Android scope, not iPhone)

FAQ

What is the product name?
The product name is YCS-D02 Boot Power Cord Android Cable.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is D02.
What is this product used for?
This product is used for powering on Android motherboards without a battery and for charging detection during motherboard repair.
Which devices are compatible with this product?
This product is compatible with Android phones, including Huawei, Xiaomi and Samsung models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the YCS D02 work on iPhone boards?
No. YCS lists the D02 for Android phones and the D01 for iPhone boards.
Can I power-test a dead Android phone board without the battery using the YCS D02?
Yes. The D02 works as a battery test cable for power-on and charging detection, so you can test an Android motherboard without the battery.