YCS R1 Pro 1000W Hot Air Rework Station with 4 Nozzles
₨ 36,500
1000W Hot Air Rework Station for Mobile BGA Repair
The YCS R1 Pro hot air rework station delivers 1000W of heating power, a 100°C–550°C temperature range and 50L/min airflow for BGA and SMD rework on phone, tablet and laptop boards. An HD color screen shows your temperature and airflow settings, and the menu includes temperature memory so you can return to a working setting fast. Four included nozzles cover chip-size changes at your bench. The unit runs on AC 220V or 110V and fits a compact 225 × 208 × 136 mm footprint. Mobile repair shops use it for CPU reflow, IC change karna jobs and dead phone board recovery.
In stock
YCS R1 Pro Hot Air Rework Station for Precise BGA and SMD Rework
The YCS R1 Pro hot air rework station gives a mobile repair bench 1000W of heating power, a 100°C to 550°C temperature range and up to 50L/min of airflow. Technicians who already know BGA and SMD rework choose this class of tool for repeatable control. The R1 Pro packs that control into a 225 × 208 × 136 mm unit with an HD color screen and four nozzles. This page explains what the station does, which boards it suits and where it fits in a professional repair workflow.
Heating Power, Temperature Range and Airflow Control
As a 1000W hot air gun for mobile repair, the R1 Pro sits in the high-output tier of hot air stations. That headroom matters on multilayer phone boards, where ground planes pull heat away from the joint and a weak gun forces you to hold the nozzle over the chip for too long. More power lets you work at a controlled setting instead of pushing the temperature to compensate. The 100°C–550°C range (212°F–1031°F) covers gentle preheating, flux activation and the higher temperatures lead-free joints need.
Airflow reaches 50L/min, and the air volume scale runs from 1 to 200, so you tune airflow separately from temperature. Keep the airflow low near small passives, shields and flex connectors, and raise it when you heat a larger package. The station accepts AC 220V and 110V input, which suits Pakistani 220V mains and imported-voltage workshop setups alike.
HD Color Screen, Menu and Temperature Memory
The HD color screen replaces the knob-and-segment displays of older stations. You read the set temperature and airflow at a glance and change both through the on-screen menu. The menu covers temperature adjustment, airflow adjustment, temperature memory and the power switch, so every control you touch during a job sits in one place.
Temperature memory pays off in shops that repeat the same job. Set a profile that works for a specific CPU reflow once, store it, and recall it when a similar board lands on your bench. Repeatable settings cut guesswork, and they help a junior technician follow the same procedure as the senior one without a notebook of temperatures.
Where the YCS R1 Pro Fits in Your Repair Workflow
Hot air rework sits at the center of board-level mobile repair. A dead phone shows no current after a drop, a hang on logo fault points to a memory or CPU joint, or a charging issue traces back to a power IC. In each case the repair starts with diagnosis on the board and ends with a chip lift and refit. The R1 Pro handles the heating step: you lift the BGA or SMD chip, clean the pads, then reflow or replace the part. That covers IC change karna jobs, CPU reflow and general SMT welding repair.
Build the rest of your bench around the station. A PCB holder keeps the board steady while you work, and a microscope lets you check pad alignment and solder balls after the chip comes off. Reballing kits restore a lifted chip before you fit it again, multimeters confirm shorts before and after rework, and soldering stations handle the small-pad and through-hole work around it. After the hardware fix, you move to the software side. ISP pinout tools and eMMC programmers read and write memory on boards that fail to boot, UFS adapters cover UFS storage, and test boxes handle flashing and software marna on a phone that went dead after flash. If your volume outgrows one 1000W gun, browse the Hot Air Stations category for higher-output options.
Four Nozzles and Package Contents
The package includes the R1 Pro air gun, four nozzles, a power cord and a user manual. Four nozzles give you a starting range for different chip sizes, so you change the airflow pattern without buying accessories on day one. Match the nozzle opening to the package. Pick a smaller opening for tight areas beside shields and connectors, and a wider opening so heat wraps a larger BGA evenly instead of hitting one edge.
Before you reflow, apply flux, protect nearby plastic parts and connectors, and start from a conservative temperature. Raise it only as far as the joint requires. This habit protects the board and gives you cleaner results on every pass.
Buying Notes for Repair Shops and Service Centers
Verified scope matters when you stock tools for a repair business, so here is what the YCS R1 Pro hot air rework station covers. Product documentation positions it for soldering and desoldering BGA SMD chips on iPhone, iPad, mobile phones, tablets and laptops. It does not target a single brand or chipset, so one unit serves phone, tablet and laptop board work at your bench.
At 225 × 208 × 136 mm, the station fits small benches, and the 1000W output suits busy service centers and training institutes that run many reflow cycles per day. Buyers who compare any BGA SMD rework station look at power rating, temperature ceiling, airflow range and interface. The R1 Pro answers with 1000W, a 550°C maximum, 50L/min airflow and an HD color screen with temperature memory. Add it to your Mechanicpk order together with flux, reballing kits and a PCB holder to complete your rework setup.
| Weight | 4.0 kg |
|---|
Key Features
- ✓1000W heating power for multilayer phone and tablet boards
- ✓100°C–550°C temperature range (212°F–1031°F)
- ✓50L/min airflow with an air volume scale from 1 to 200
- ✓HD color screen for temperature and airflow readout
- ✓Menu with temperature adjustment, airflow adjustment and temperature memory
- ✓AC 220V / 110V input
- ✓4 nozzles included for different chip sizes
- ✓Compact 225 × 208 × 136 mm body that fits small repair benches
Specifications
| Brand | YCS |
|---|---|
| Model | R1 Pro |
| Category | Hot Air Rework Station |
| Compatibility | BGA and SMD chips on iPhone, iPad, mobile phones, tablets and laptops |
| Supported Devices | iPhone, iPad, mobile phones, tablets, laptops |
| Technology | Intelligent hot air control, 100°C–550°C (212°F–1031°F), 50L/min airflow, air volume 1–200, HD color screen |
| Input Voltage | AC 220V / 110V |
| Power Rating | 1000W |
| Dimensions | 225 × 208 × 136 mm (L × W × H) |
Common Repair Uses
- ✓BGA chip desoldering and resoldering
- ✓CPU reflow on mobile phone boards
- ✓SMD component removal and replacement
- ✓IC change karna on dead phone boards
- ✓Hang on logo and boot loop issue board repair
- ✓Charging issue power IC replacement
- ✓SMT welding repair
- ✓Chip lift before reballing
Compatible Devices
- ✓iPhone logic boards
- ✓iPad logic boards
- ✓Mobile phone motherboards
- ✓Tablet motherboards
- ✓Laptop motherboards
- ✓BGA chips on phone CPU boards
- ✓SMD components on phone and laptop boards
- ✓General electronics SMT repair boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature and airflow range does the YCS R1 Pro offer?
Does the YCS R1 Pro work on 220V mains in Pakistan?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock
YCS S1-160W Ultra Soldering Iron Station for Mobile Repair
In stock
YOUKILOON SAM EDL V2 Cable For Samsung USB EDL Download Mode Cable
In stock



