TE-071 PCB Holder Fixture for Mobile Board Soldering
₨ 900
TE-071 PCB Holder for Mobile Repair
The TE-071 is a stainless steel PCB holder for mobile repair that clamps compact phone logic boards through a precision screw and five seating grooves. It accepts boards around 70mm wide and up to 3mm thick, so you can solder, desolder, and rework CPU and IC sections with both hands free. Use it for pad repair, jumper lagana, and BGA work on Android and iPhone boards within its size range. The package includes one fixture holder. It does not suit large computer or TV motherboards with plug-in components. Add it to your bench alongside hot air and soldering stations from Mechanicpk.
In stock
PCB Holder for Mobile Repair: TE-071 Steel Fixture for Stable Board Work
The TE-071 is a PCB holder for mobile repair that locks a phone logic board in place, so both of your hands stay free for the soldering iron, tweezers, or hot air gun. It uses a stainless steel base with screw-driven positioning, and it targets compact mainboards with a width of about 70mm and a thickness up to 3mm. You mount the board once, then work on CPU, IC, and pad faults without chasing a sliding PCB across the bench. When you handle dead phone, charging issue, and hang on logo jobs every day, a stable board directly reduces lifted pads and repeat rework.
How the TE-071 Clamps a Phone Board
The base carries five grooves that seat the board edges, and a precision screw sets the clamp against them. You tighten the screw gradually until the board sits firm, then you confirm that no edge lifts, because sudden pressure can flex a thin board. Install one side first and seat the opposite side second. That sequence keeps the board square and protects the corner components from stress. The steel construction holds its shape while you carry the clamped board to the microscope, and the flat platform gives you a consistent working height for tweezer work. Keep the jig clean of flux residue and solder balls so the grooves seat each board evenly every time. This is a manual screw fixture, so you control the clamping force yourself, and a few seconds of care at this step saves minutes of rework later.
Where This Mobile Motherboard Holder Fits in Your Workflow
A board holder sits at the start of almost every hardware job. Before you reball a CPU, replace a power IC, or rebuild a pad, the PCB must stay immobile, and the TE-071 covers that stage for soldering, desoldering, and rework. You use it for IC change karna on charging and power sections, for jumper lagana on broken traces, and for pad repair after a lifted connector. It supports CPU repair and soldering with tweezers, which makes it a daily tool for BGA work. Hold the board steady during hot air passes so the chip does not shift while the solder reflows. A steady mobile motherboard holder also improves your tweezer accuracy, because you stop correcting for board movement and start placing components cleanly. Keep your flux and tweezers within reach, since the clamped board leaves both hands free. Pair the fixture with a hot air station, a soldering station, and a microscope to complete a board-level bench. If your jobs outgrow a fixed-size jig, move up to an adjustable PCB holder with wider travel.
TE-071 PCB Fixture Compatibility and Who Should Buy It
The TE-071 PCB fixture works by physical size, not by phone model. Android and iPhone logic boards that fit the width and thickness range sit in the grooves, and compact boards from cameras, earphones, and game players follow the same rule. Because it relies on size rather than a model-specific pattern, one TE-071 covers many repair jobs, and you avoid buying a separate jig for each new phone release. Measure your board against the 3mm thickness limit before you clamp it. If you repair laptop or television boards, choose a larger fixture, because those boards fall outside this tool’s intended scope. The package contains one fixture holder, so you build your setup around your own station, tweezers, and flux. Repair shops that run volume work, service centers, training institutes that teach board-level repair, and home benches that need a dependable second pair of hands all use this style of fixture. Mechanicpk stocks the TE-071 next to related PCB holders, hot air stations, soldering stations, and microscopes, so you can complete the same bench from one catalog.
| Weight | 0.25 kg |
|---|
Key Features
- ✓Stainless steel base for a rigid working platform
- ✓Five grooves that seat the board edges
- ✓Precision screw positioning for controlled clamping
- ✓Fits compact boards about 70mm wide and up to 3mm thick
- ✓Frees both hands for iron, tweezers, and hot air tools
- ✓Suits soldering, desoldering, and rework
- ✓Works by board size, so it covers many phone models
- ✓Ships as one fixture holder
Specifications
| Model | TE-071 |
|---|---|
| Category | PCB Holders |
| Compatibility | Compact mobile phone PCBs, about 70mm wide and up to 3mm thick |
| Supported Devices | Mobile phones, plus camera, earphone, and game player boards within the size range |
| Technology | Screw-positioned clamping with five edge grooves |
| Material | Stainless steel base |
Common Repair Uses
- ✓Holding a phone board steady for CPU repair and soldering with tweezers
- ✓Soldering and desoldering IC sections on charging and power circuits
- ✓IC change karna on compact mainboards
- ✓Jumper lagana on damaged traces
- ✓Pad repair after a lifted connector or component
- ✓General board rework with both hands free
- ✓Steadying a board during BGA chip work
- ✓Holding a board in position for microscope inspection
Compatible Devices
- ✓Universal, not device-specific. The fixture holds boards by physical size (about 70mm wide, up to 3mm thick).
- ✓Compact mobile phone mainboards within the width and thickness range
- ✓Android phone motherboards in the same size range
- ✓iPhone logic boards in the same size range
- ✓Small phone daughterboards that fit the clamping range
- ✓Camera circuit boards within the size range
- ✓Earphone circuit boards within the size range
- ✓Game player circuit boards within the size range
- ✓Other compact PCBs that fit the grooves and the 3mm thickness limit
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What board size does the TE-071 PCB holder support?
How do you mount a board in the TE-071 without stressing it?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



