Magic Pad for iPhone X-12 Dot Matrix Face ID Repair

₨ 600

Thermal Silicone Pad for iPhone X-12 Face and CPU Repair

Your rework stage needs a stable base before you apply a stencil or heat a board. This iPhone dot matrix repair pad gives you dedicated grooves for the face component, dot matrix module, infrared front camera, both fingerprint sensors and the CPU. The thermal silicone surface keeps the board seated while you plant tin, so the stencil stays aligned. Its 115 by 97 millimeter footprint leaves room for a hot air station and a microscope on the same bench. A fixed seat limits the tin bridging that can follow steel mesh deformation.

Out of stock

12 People watching this product now!
Description

Magic Pad for iPhone X-12 Dot Matrix, Face ID, Fingerprint and CPU Repair

A small shift of a dot matrix or face component during tin work can ruin a board that was otherwise healthy. This iPhone dot matrix repair pad holds each part in a fixed groove, so the board stays put from cleaning to planting. The thermal silicone body grips the logic board while you work, which keeps your stencil and components in line. Technicians servicing iPhone X, XS, 11 and 12 boards get the most value from it during face ID and CPU rework. It belongs at the rework stage of your workflow, after cleaning and before the stencil goes on.

Groove Layout for Face ID and Dot Matrix Parts

Each groove on this pad matches a specific iPhone component. You get dedicated slots for the iPhone X, XS, 11 and 12 face components, along with a separate groove for the dot matrix module. The infrared front camera has its own recess as well. Seating every part in its own cavity reduces drift while the board is under heat. When you lift the board after planting, the components remain where you positioned them.

Fingerprint and CPU Positioning on the Board

Two fingerprint grooves sit on the pad, so you can hold both sensor positions in a single session. The CPU placement groove gives the main processor a fixed seat while you work on the surrounding pads. Keeping the CPU still matters when you clean old tin or prepare pads for fresh planting. Working on the fingerprint and CPU areas together saves bench time, because you do not need to reset the board between tasks. Check each groove for debris before you place a part.

Stencil Stability and Workflow Use

The thermal silicone surface keeps the board from sliding when you press a stencil into place. Steel mesh can deform under handling and heat, and that deformation pushes tin into the wrong spots. A flat, fixed board reduces the chance of that problem during planting. Clean the mat between boards so residual flux does not affect grip. Use the pad alongside your hot air station and microscope to check alignment before you apply heat.

Additional information
Weight0.19 kg
Q & A
Please login to post questions

Key Features

  • Dedicated grooves for iPhone X to 12 face and dot matrix components
  • Separate infrared front camera recess
  • Two fingerprint grooves for sensor positioning
  • CPU placement groove for stable processor work
  • Thermal silicone surface that grips the board during tin work
  • Reduces board movement during stencil alignment
  • Helps avoid tin messing caused by steel mesh deformation
  • 115 x 97 mm footprint for standard repair benches

Specifications

BrandHong Hai Tong
CategoryMobile repair holders and positioning pads
CompatibilityiPhone X to iPhone 12 series face, dot matrix, fingerprint and CPU positions
Supported DevicesiPhone X, XS, 11 and 12 series (groove-based)
TechnologyThermal silicone tin planting mat
MaterialThermal silicone
Dimensions115 x 97 mm

Common Repair Uses

  • Re-tinning the face component area on iPhone X to 12 boards
  • Dot matrix module work during face ID repair
  • Tin planting on the infrared front camera area
  • Fingerprint sensor pad work on iPhone X to 12 boards
  • CPU reballing and removal of old tin from the processor area
  • Holding the board flat during stencil alignment
  • Securing the logic board during hot air rework
  • Clearing old tin from component areas before fresh planting

Compatible Devices

  • Device-specific, groove-based scope for iPhone X to iPhone 12 series
  • iPhone X face component groove
  • iPhone XS face component groove
  • iPhone 11 face component groove
  • iPhone 12 face component groove
  • iPhone dot matrix component groove
  • iPhone infrared front camera groove
  • iPhone fingerprint grooves (two)
  • CPU placement groove

FAQ

What is the product name?
The product name is Magic Pad for iPhone X-12 Dot Matrix Face ID Repair.
What is the brand of this product?
The brand of this product is Hong Hai Tong.
What is the model of this product?
The model of this product is not verified and is therefore not listed.
What is this product used for?
This product holds iPhone X to 12 boards steady during dot matrix, face component, fingerprint and CPU tin work.
Which devices are compatible with this product?
This product is compatible with the iPhone X, XS, 11 and 12 series face, dot matrix, infrared camera, fingerprint and CPU positions.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which iPhone face components does the pad hold?
The grooves cover the face component for iPhone X, XS, 11 and 12, the dot matrix module, the infrared front camera, two fingerprint sensors and the CPU.
Does this pad help prevent tin bridging during planting?
It helps limit tin messing caused by steel mesh deformation, because the board stays fixed during planting.