Mechanic SD360 No-Clean Flux Paste 10cc

₨ 600

Mechanic SD360 No-Clean Flux Paste, 10cc

The Mechanic SD360 is a no-clean flux paste with low activity, supplied in a 10cc syringe for controlled dispensing. Its transparent formula leaves no visible residue after soldering and protects joints against corrosion and oxidation. Repair technicians use it for SMD soldering, BGA reballing, mobile phone motherboard repair, laptop motherboard work, and general PCB repair. It works with both lead and lead-free soldering processes, so one paste covers mixed workloads. The residue does not conduct after welding, and the no-clean design removes the wash step on most boards.

In stock

19 People watching this product now!
Description

Mechanic SD360 No-Clean Flux Paste for Precision Mobile and BGA Repair

The Mechanic SD360 no-clean flux paste sits at the start of your soldering workflow on a modern phone board. Its low activity level gives controlled wetting, so you prepare a pad without pushing the chemistry harder than the joint needs. Technicians working on SMD placement, BGA reballing, and general PCB repair will find the 10cc syringe fits a steady bench routine. The transparent body leaves no visible residue, which lets you judge joint quality by eye after reflow. One paste covers both lead and lead-free solder processes, so your bench stays simpler.

Where the SD360 Fits in Your Reflow Workflow

Flux goes on before solder, and that order matters on a fine-pitch board. Apply a thin, even layer to the pads or under the chip, then bring the joint to temperature so the flux can clear oxides and let the solder flow. The low activity rating means the paste acts gently, which suits delicate parts where excess chemistry can spread under a package. On reballing jobs, a clean wetting layer gives each ball a consistent surface to bond to, which supports a uniform result across the grid. Because the formula is no-clean, you skip a separate wash step to remove most residue after soldering. That saves time on a busy repair bench and keeps board handling simple. The transparent body also lets you inspect wetting on each joint without wiping the area first. Keep your syringe capped between jobs so the paste stays easy to dispense on the next repair.

Lead and Lead-Free Compatibility on Your Bench

Many technicians switch between leaded and lead-free solder depending on the job or the board in front of them. The SD360 works with both lead and lead-free soldering processes, so you do not need a second flux for each alloy. Lead-free solder typically runs at higher reflow temperatures, and a flux that resists oxidation helps the joint form cleanly at that heat. The residue does not conduct after welding, which reduces risk near fine traces on a dense motherboard. Set your station temperature and dwell time to match your alloy first, because flux supports the joint but never replaces correct heat control. Test your profile on a scrap board when you change alloys, then move to the live repair with confidence.

Capacity, Residue and Post-Soldering Care

The SD360 comes in a 10cc capacity, which gives you a practical volume for repeated mobile, laptop, and PCB jobs. The formula protects against corrosion and residual scale, so joints stay protected after the board cools. The environmentally friendly, no-clean design avoids a wash-off cycle that would otherwise add cost and handling time. Wipe away excess paste from the work area before it spreads onto neighboring components, so your next job starts clean. Treat the paste as a consumable and keep the cap seated to protect its working consistency between sessions.

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • Pure transparent formula leaves no visible residue for a clean finish
  • No corrosion and no residual scale protects soldered joints
  • Oxidation prevention supports better solder flow
  • Improves heat transfer for stronger, more precise connections
  • No-clean design removes the cleaning step after soldering
  • Non-conducting residue after welding reduces short-circuit risk
  • Low activity level suits delicate board work
  • 10cc capacity, compatible with lead and lead-free solder

Specifications

BrandMechanic
ModelSD360
CategorySoldering Flux Paste
TechnologyNo-clean flux paste, low activity
CompatibilityLead and lead-free soldering processes

Common Repair Uses

  • Mobile phone repair
  • Laptop motherboard repair
  • SMD component soldering
  • BGA reballing
  • General PCB repair
  • Lead-free soldering work
  • Lead-based soldering work
  • Joint finishing on no-clean boards that skip a wash step

Compatible Devices

  • Mobile phone motherboards (general scope, not model-specific)
  • Laptop motherboards (general scope, not model-specific)
  • SMD components on PCBs
  • BGA chips during reballing
  • Lead-based solder joints
  • Lead-free solder joints
  • General PCB repair boards

FAQ

What is the product name?
The product name is Mechanic SD360 No-Clean Flux Paste 10cc.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is SD360.
What is this product used for?
This product is used for SMD soldering, BGA reballing, and PCB repair in mobile and laptop motherboard work.
Which devices are compatible with this product?
This product is compatible with general mobile phone and laptop motherboards and lead and lead-free soldering processes. It is universal and not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the SD360 flux paste require cleaning after soldering?
It is a no-clean formula that leaves a non-conducting, transparent residue, so most boards do not need a separate wash step.
Can the SD360 flux paste handle lead-free solder?
Yes, it works with both lead and lead-free soldering processes.