Mechanic iMini T2 Torx Precision Screwdriver

₨ 400

Magnetic T2 Torx Driver for Phones

The Mechanic iMini T2 is a manual precision screwdriver built around a T2 Torx tip. The tip hardens to up to 56–59 HRC, so it keeps its edge through repeated screw removal on phone housings and tablet frames. A built-in magnet grips small T2 screws, which keeps them out of the board and off the bench. The anti-slip handle gives a steady grip during long teardown sessions. A rotating bearing lets the handle turn 360 degrees, so you drive and back out fasteners without twisting your wrist.

In stock

17 People watching this product now!
Description

Mechanic iMini T2 Torx Screwdriver for Phone Repair

The Mechanic iMini T2 Torx screwdriver is a manual precision driver for the T2 Torx fasteners found across many phone and tablet housings. A driver that slips on a fastener head damages the screw and the housing, so the tip and grip matter on every job. The iMini T2 combines a magnetic tip, a rotating bearing and an anti-slip handle to cover the core demands of a disassembly bench. This page explains what the driver does, where it fits in a repair workflow, and which jobs it handles best. The specification block follows the description.

Key Technical Highlights

The T2 tip matches the star-shaped recess of T2 Torx screws, which gives the driver a firm seat on the fastener. The tip hardness reaches up to 56–59 HRC, a level that resists rounding and wear when you remove the same fasteners many times a day. A built-in magnet holds the screw on the tip during removal and refitting, so you can place it into a tight housing without losing it. The bearing rotates 360 degrees, which lets you keep the handle steady while the tip turns. The anti-slip, ergonomic handle keeps control steady when your hand is sweaty or you work under bench light for long hours.

Where It Fits in Your Repair Workflow

Most phone repairs start with opening the device, and this driver handles that first stage. Remove the T2 screws in a logical order, sort them on a magnetic mat, and keep track of the shorter fasteners that hold the board and the battery bracket. Once the housing is open, your work moves to board-level tasks such as IC inspection, reballing and component replacement. At that point, pair the driver with a microscope and a PCB holder so the board stays fixed while you work. If your job moves into heat-based work, a hot air station or soldering station handles the next step, and this driver stays on the bench for reassembly.

Why Technicians Choose a Manual Precision Torx Driver

A manual driver gives you direct feel on each fastener, which an electric screwdriver cannot match on delicate screws. You control the turning force, so you avoid overtightening threads in plastic frames or stripping a small T2 head. This matters most when you open a dead phone with a cracked or previously opened housing, because the screws in those units often sit loose or cross-threaded. The iMini T2 suits technicians who work through many devices per day and need a tool that stays accurate over time. For workshops building a complete kit, the iMini series also offers other tips, so you can match the driver to each model you handle.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • T2 Torx tip for matching fasteners
  • Magnetic tip holds screws during removal and refitting
  • Hardened tip, up to 56–59 HRC
  • 360° rotating bearing for smooth turning
  • Anti-slip, ergonomic handle

Specifications

BrandMechanic
ModeliMini (T2 tip)
CategoryPrecision Screwdriver
CompatibilityT2 Torx screws
Supported DevicesMobile phones and tablets
TechnologyMagnetic tip, 360° rotating bearing, hardened tip up to 56–59 HRC

Common Repair Uses

  • Back cover and housing removal on phones with T2 screws
  • Tablet frame and battery access during teardown
  • Opening small electronics before board-level work
  • Removing and refitting T2 screws without stripping the head

Compatible Devices

  • Mobile phones that use T2 Torx fasteners
  • Tablets that use T2 Torx fasteners
  • Small electronics that use T2 Torx screws

FAQ

What is the product name?
The product name is Mechanic iMini T2 Torx Precision Screwdriver.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is iMini with a T2 Torx tip.
What is this product used for?
This product is used for removing and refitting T2 Torx screws during phone and tablet disassembly.
Which devices are compatible with this product?
This product is compatible with mobile phones and tablets that use T2 Torx fasteners. It is not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which screws does the iMini T2 fit?
The iMini T2 fits T2 Torx screws, the star-shaped fastener common in phone and tablet housings.
Does the iMini T2 hold screws magnetically?
Yes, the iMini T2 has a built-in magnet that holds the screw on the tip during removal and refitting.