Sunshine SS-C210-IS Soldering Iron Tip for T210 Handle
₨ 800
Bent Fine-Point C210 Tip for T210 Handles
The Sunshine SS-C210-IS soldering iron tip fits T210, T26 and S21 handles and gives your micro-soldering bench a bent, fine-point integrated cartridge. Multilayer nano-electroplating over a copper body, inside a stainless steel housing, delivers rapid heat-up, roughly 2-second tinning and strong oxidation resistance with lead-free solder. The curved profile reaches tight areas around flex pads, charging port pins and small SMD parts without crowding neighbouring components. You swap the cartridge in seconds and start working. Mechanicpk supplies this C210-IS tip across Pakistan for repair shops and service centers that need precise, repeatable board-level soldering.
In stock
Sunshine SS-C210-IS Soldering Iron Tip for Precision Board-Level Work
The Sunshine SS-C210-IS soldering iron tip gives T210-style handpieces a bent, fine-point integrated cartridge for mobile phone PCB work. The heating element sits inside the cartridge, so the tip climbs to working temperature quickly and recovers fast between joints. You choose the IS profile when a straight tip blocks your microscope view or touches neighbouring components on a dense logic board.
Key Technical Highlights
The SS-C210-IS belongs to the C210 cartridge series, the format JBC established for its T210 handpiece. Sunshine builds this version with a copper body and multilayer nano-electroplating, wrapped in a stainless steel housing that limits heat loss. Listings for the C210 series quote about 2 seconds for tinning, a 75W power rating and a 120–450°C control range on the host station. The plating resists oxidation, which keeps the working surface wettable through long shifts, and lead-free solder works without trouble.
The cartridge measures 80 mm in total length and weighs about 2.5 g. That low mass keeps your handpiece balanced during long microscope sessions, and the integrated construction means you never assemble a separate heater, sensor and tip. You push the cartridge into the handle and the station takes over.
Repair Workflow Fit
On a Pakistani repair bench, this tip handles the fine jobs that a hot air station cannot touch cleanly. A dead phone with a charging issue often needs a precise touch on a charging port pad or a damaged track. A display problem frequently traces back to a lifted flex pad, where jumper lagana demands a thin, controlled tip. Small resistors, capacitors and diodes beside a larger IC also fall into its range, so IC change karna on the main chip stays with your hot air station while the surrounding passives get the SS-C210-IS.
Pair the tip with a quality microscope, a stable PCB holder and a multimeter. You solder the joint, then confirm continuity before you power the board, which catches a weak hardware fault before it costs you another repair cycle. Technicians who run reballing kits and stencils for BGA work also keep a bent fine tip nearby for cleanup and correction passes around the chip.
Choosing the IS Profile Over I and K
Sunshine sells the C210 line in three common shapes. The SS-C210-I carries a straight, pointed tip for general fine soldering. The SS-C210-K carries a knife edge that suits pad cleaning, drag soldering and resin removal. The SS-C210-IS bends the fine point at an angle, which lifts the handle away from the work area and opens your line of sight. When you solder next to tall components, connectors or shield cans, that angle saves you from heat damage to neighbouring parts.
Many shops stock all three shapes and rotate them by job. If you buy one tip to cover the widest range of micro-soldering on phone boards, the IS profile gives the best access. Check that your handpiece accepts T210-type cartridges before you order, since the tip does not fit other families such as T12 or C245.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Bent, fine-point IS tip profile for tight-space access
- ✓Integrated cartridge with built-in heating element
- ✓Rapid heat-up and roughly 2-second tinning
- ✓Multilayer nano-electroplating for oxidation resistance
- ✓Stainless steel housing that limits heat loss
- ✓Lead-free solder compatible
- ✓Plug-and-play fit on T210, T26 and S21 handles
- ✓Lightweight 80 mm cartridge for steady microscope work
Specifications
| Brand | Sunshine |
|---|---|
| Model | SS-C210-IS |
| Category | Soldering Iron Tips (C210 Series Cartridge) |
| Compatibility | T210, T26, T26D and S21 soldering station handles |
| Supported Devices | Universal — not phone-model specific |
| Technology | Integrated heating cartridge with multilayer nano-electroplating |
| Material | Copper body with nickel/chrome nano-plating, stainless steel housing |
| Power Rating | 75W |
| Dimensions | 80 x 3.5 x 3.5 mm |
Common Repair Uses
- ✓Precision micro-soldering on mobile phone boards and electronic assemblies
- ✓Micro-soldering on mobile phone PCBs
- ✓Flex cable pad repair
- ✓Jumper wire soldering on display and charging lines
- ✓SMD resistor, capacitor and diode replacement
- ✓Charging port pin touch-up
- ✓Soldering in tight spaces beside tall components
- ✓Lead-free solder work under a microscope
- ✓Pad and track correction around BGA chips
Compatible Devices
- ✓Universal soldering cartridge — fits T210-type handles and stations, not specific to any phone model
- ✓T210 handpieces
- ✓T26 soldering station handles
- ✓T26D soldering station handles
- ✓S21 soldering station handles
- ✓JBC T210-type handpieces
- ✓Sunshine T210-type soldering stations
- ✓Sugon T210-type handpieces
- ✓GVM T210/T26 soldering stations
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the difference between SS-C210-IS, SS-C210-I and SS-C210-K tips?
Will the SS-C210-IS tip fit my T210 handle and work with lead-free solder?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



